| No. | Brand | b | B | e | f | m | s | Q | X |
| 4*8 | INA | - | - | - | - | - | - | - | - |
| 1019 | SKF | - | 31 mm | - | - | - | - | - | - |
| V65W | - | - | - | - | - | - | - | - | - |
| (4 | - | - | - | - | - | - | - | - | - |
| 23044CCK/W33 | - | - | 67 mm | - | - | - | - | - | - |
| 2-25mm | - | - | - | - | - | - | - | - | - |
| 4318S | FAFNIR | - | - | - | - | - | - | - | - |
| 6028 | SKF | - | - | - | - | - | - | - | - |
| 45bwd03 | - | - | - | - | - | - | - | - | - |
| 5*220mm | - | - | 118 mm | - | - | - | - | - | - |
| 10Pcs | - | - | - | - | - | - | - | - | - |
| 4pc | - | - | - | - | - | - | - | - | - |
| OSB3 | INA | - | - | - | - | - | - | - | - |
| 5205 | Nachi | - | - | - | - | - | - | - | - |
| 30w | - | - | - | - | - | - | - | - | - |
| TA1919 | - | - | - | - | - | - | - | - | - |
| FL606ZZ | NTN | - | - | - | - | - | - | - | - |
| 28678 | Timken | - | - | - | - | - | - | - | - |
| 404 | Danfoss | - | - | - | - | - | - | - | - |
| 40L | - | - | - | - | - | - | - | - | - |
| 10 | - | - | - | - | - | - | - | - | - |
| 20ft | - | - | 41 mm | - | - | - | - | - | - |
| XVZ1300 | - | - | - | - | - | - | - | - | - |
| G22 | - | 30 mm | - | - | - | - | - | - | - |
| 2003-2008 | NSK | - | - | - | - | - | - | - | - |
| 6004.C3 | fag | - | - | - | - | - | - | - | - |
| 15mm | INA | - | 38,1 mm | - | - | - | - | - | - |
| A22-105E2A External Gear Slewing Rings(117.082*95.06*6inch) For Tunnel Boring Machines | Bearing Length Tolerance (B tol.) - +.010 / -0.010:+.010 / 0.010; Bearing Length, Nominal (B):1.500; Bearing Bore after Mounting (di):1.4952 / 1.4914; OD Chamfer Length (Co):0.045; Bearing Outside Diameter, Nominal(Do):1.656; Material:Carbon steel shell w; Housing Bore Dia. (Dh):1.6572 / 1.6562; Shaft Dia., Nominal (d):1.5000; ID Chamfer Angle (B deg.):30; ID Chamfer Length (Ci):0.020; |
| HT10-60E1Z External Gear Slewing Ring Bearings (65.84*54*3.5inch) For Jib Cranes | Characteristic outer ring frequency, BPF0:8.71 Hz; Size (mm):80x140x33; Static load, C0:19.9 kN; Y0:2.61; Dynamic load, C:48.5 kN; Nlim:5,900 rpm; rs min:2 mm; B:33,000 mm; Width (mm):33,000; Y1:2.49; |
| KH-125E External Gear Slewing Ring Bearings (16.5*8.625*2.5inch) For Robots And Medical Equipment | Rolling Element:Ball Bearing; Housing Style:2 Bolt Pillow Block; B:44,501 mm; Brand:INA; N1:9,246 mm; Minimum Buy Quantity:N/A; Bolt Spacing Maximum:4.449 Inch | 113Mill; Housing Material:Cast Iron; N:11,989 mm; Other Features:Single Row | Low Bas; |
| CRBC40070UU Crossed Roller Bearing | Bearing number:SB 22A; Outer Diameter (mm):37; da min.:24,5 mm; Weight:0,085 Kg; Brand:IKO; D:37 mm; Width (mm):19; r min.:0,3 mm; Basic dynamic load rating (C):50,2 kN; Bore Diameter (mm):22; |
| XSI140614 Bearing 546*714*56mm | B - Cone Width:1.1721 in; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:10600 lbf; Design Units:Imperial; d:1.3750 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:3820 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:23500 lbf; a - Effective Center Location4:-0.34 in; Cone Part Number:3482; C0 - Static Radial Rating:26800 lbf; R - Cone Backface To Clear Radius3:0.03 in; |
| SSM1390/50CHH Slewing Bearing For 42M Pump Truck | Brand:NMB; Weight:0,055 Kg; Width (mm):10; L:29 mm; H:10,5 mm; B:10 mm; Bearing number:RBM10E; Bore Diameter (mm):10; F:48 mm; D:26 mm; |
| 16369001 External Gear Slewing Ring Bearings (97.795*76.85*7.126inch) For Heavy Mill Equipment | Dimension M:70 mm; Bearing Type:Split Cylindrical Re; Note:This product line wa; Maximum Speed:3940 rpm; Housing Width:4.0 in; Cr - Dynamic Load Rating:23155 lbf; Dimension L:275 mm; Dimension H2:180 mm; Dimension J:234 mm; Bearing UPC:013992025777; |
| 9E-1Z30-0823-80 Crossed Roller Slewing Rings 715/979/100mm | Characteristic rolling element frequency, BSF:3.71 Hz; row type & fill slot:Single Row Non-Fill; Static load, C0:54 kN; Outer Race Width:1.299 Inch | 33 Mill; f0:12.7; Radial clearance class:CN; Inch - Metric:Metric; Manufacturer Item Number:6411; Harmonized Tariff Code:8482.10.50.68; |
| BFKB353224/HA4 Crossed Roller Bearing | rmin:3 mm; Size (mm):130x230x40; D:230 mm; da:148 mm / Tolerance:; r1 min:3 mm; Bearing number:HCB7226-E-T-P4S; a:62 mm; d:130 mm; m:4,92 kg / Weight; Da:211,5 mm / Tolerance; |
| 6392/2910G Slewing Bearing 2910x3520x220mm | Calculation factor - f0:7.9; Da max.:16.6 mm; d:6.35 mm; Width (mm):7,142; Outer Diameter (mm):6,35; Brand:SKF; D:19.05 mm; d2:8.5 mm; ra - max.:0.4 mm; Calculation factor f0:7.9; |
| EX100-1 Excavator HITACHI Double Row Slewing Bearing 1195*962*86mm | Brand:SNR; Width (mm):18,2; D:21 mm; Size (mm):14x21x18.2; Bore Diameter (mm):14; Outer Diameter (mm):21; Bearing number:TNB44261S01; d:14 mm; |
| 92-200411/1-07212 Slewing Bearing With Internal Gear 325/518/56mm | C:150 mm; d:320 mm; D:580 mm; Brand:ISO; Width (mm):150; B:150 mm; Outer Diameter (mm):580; Bore Diameter (mm):320; Size (mm):320x580x150; Bearing number:NUP2264; |
| 16390001 Internal Gear Slewing Ring Bearings (40.88*30.56*3.38inch) For Utility Derricks | B:25,4 mm; D:82,55 mm; R:3,5 mm; Outer Diameter (mm):82,55; C:19,05 mm; r:2 mm; Size (mm):42.875x82.55x23.812; Brand:Timken; Bore Diameter (mm):42,875; Width (mm):23,812; |
| 1910DBS202y Four-point Contact Ball Slewing Bearing With External Gear | B - Cone Width:29.000 mm; e - ISO Factor8:0.83; Ab - Cage-Cone Frontface Clearance:4.3 mm; C0 - Static Radial Rating:157000 N; Da - Cup Frontface Backing Diameter:115.10 mm; Cg - Geometry Factor:0.0739; Aa - Cage-Cone Backface Clearance:3.8 mm; Cup Part Number:Y31311M; D:120.000 mm; C1 - Dynamic Radial Rating (1 million revolutions)5:172000 N; |
| 9O-1Z30-0461-0260 Crossed Roller Slewing Rings 340/550/90mm | Brand:NTN; C:360 mm; B:360 mm; Basic dynamic load rating (C):4 050 kN; Da:427 mm; Bore Diameter (mm):300; Bearing number:E-CRO-6015; d:300 mm; D:460 mm; r1 min.:4 mm; |
| 132.25.700 Slewing Bearing 576x844x148mm | Outer Diameter (mm):650; Weight:190 Kg; Brand:NACHI; r min.:6 mm; Calculation factor (Y1):2.19; D:650 mm; Basic static load rating (C0):6150 kN; Basic dynamic load rating (C):2730 kN; C:157 mm; Bore Diameter (mm):440; |
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
L6-16N9ZD Slewing Rings(20.39*12.85*2.2inch) With Internal Gears For Excavators And Ladle Turrets Video