| No. | Brand | A | h | b | U | S | N | K | w |
| Z550 | NTN | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 200cbm | - | - | - | - | - | - | - | - | - |
| 4511BVXXAAAA53 | Parker | - | - | - | - | - | - | - | - |
| v10 | - | - | - | - | - | - | - | - | - |
| 08143-62067-000 | - | - | - | - | - | - | - | - | - |
| 63009-2RS1 | SKF | - | - | - | - | - | - | - | - |
| 18mm | INA | - | - | - | - | - | - | - | - |
| 2307 | SKF | - | - | - | - | - | - | - | - |
| (100SP-1) | - | - | - | - | - | - | - | - | - |
| Ynf03211 | - | - | - | - | - | - | - | - | - |
| 185 | - | - | - | - | - | - | - | - | - |
| 221 | - | - | - | - | - | - | - | - | - |
| 96% | INA | - | - | - | - | - | - | - | - |
| 6200C78 | SKF | - | - | - | - | - | - | - | - |
| 9M-2031 | Bower | - | - | - | - | - | - | - | - |
| 2300 | fag | - | - | - | - | - | - | - | - |
| 2x | TRW | - | - | - | - | - | - | - | - |
| 5182 | - | - | - | - | - | - | - | - | - |
| XJ900 | NTN | - | - | - | - | - | - | - | - |
| X156 | - | - | - | - | - | - | - | - | - |
| 4 | INA | - | - | - | - | - | - | - | - |
| SG250CP0 BEARING 25.000*27.000*1.000 INCH | series:UCTBL200MZ20RFCEW; bore type:Round; radial static load capacity:3460 lbf; replacement bearing:UC207-20MZ20RF; duty type:Normal Duty; B:3-27/64 in; mounting:Tapped Base; lubrication type:Lubrication Fitting; radial dynamic load capacity:5820 lbf; bolt size:1/2-13; |
| JU040CP0 Thin Section Bearings 4X4.75X0.5 In | inside diameter:3-1/2 in; compatible bearing type:Cylindrical Roller; material:Steel; lubrication hole type:Lubrication Hole; D:4-1/4 in; bore type:Round; B:2 in; |
| RB60040 Thin-section Crossed Roller Bearing 600x700x40mm | radial dynamic load capacity:1660 lbs; radial static load capacity:2100 lbs; roller diameter:0.8750 in; series:Inch CAMROL (CY; lubrication hole location:Inner Ring; roller material:Chrome Steel; operating temperature range:-30 to +250 &de; roller width:0.5000 in; B:0.5625 in; bearing element:Needle Rollers; |
| CRBC25025UU Thin-section Crossed Roller Bearing | Mass adapter sleeve assembly:1.4 kg; B1:66.954 mm; Threads per inch:12; Lock washer:W 18; G:89.586 mm; Hydraulic nut:HMVC 18E; d3 max.:118.389 mm; Lock nut:AN 18; B:17.729 mm; d:90 mm; |
| KD160AR0 Reali-slim Bearing In Stock, 16.000X17.000X0.500 Inches | B:6.8750 in; seal type:Contact Seal; replacement bearing:5212C; housing material:Cast Iron; series:SF; operating temperature range:250°; expansion type:Non-Expansion Bearin; mounting type:Four-Bolt Flange; bearing material:52100 Steel/Bla; bore type:Round; |
| Thin Section Bearings CSCD040 | Availability:In Stock; Seals or Shields:Open Type; Clearance:Standard; B:1.563 Inch; D:7.5 Inch; d:3.25 Inch; SKU:ms19.1/2ac-hoffmann; Weight:0.02 KGS; |
| 75 mm x 115 mm x 54 mm CSXU110 Thin Section Bearings | finish/coating:Uncoated; duty type:Standard Duty; inner ring width:2.2500 in; operating temperature range:250°; B:6.3750 in; expansion type:Non-Expansion Bearin; D:5.1250 in; length through bore:2.2500 in; lubrication type:Lubrication Fitting; replacement bearing:2-23T; Size (mm):75 mm x 115 mm x 54 mm ; |
| KA070XP0 Thin Ring Bearing 7.000X7.500X0.250 Inches Size In Stock Manufacturer | finish/coating:Uncoated; compatible cone:746; manufacturer upc number:053893081151; series:745; flange type:Non-Flanged Cup; D:5.9063 in; lubrication hole type:No Hole; cup width:1.4375 in; single or double cup:Single Cup; |
| CSXA020 Thin Section Bearing (2x2.5x0.25 Inch) -KXA020 | overall nut width:52 mm; material:Steel; d1:442 mm; d3:470 mm; d2:419 mm; G:Tr 400x5; manufacturer upc number:7316577732545; slot depth:14 mm; h:14 mm; B:52 mm; |
| RA10008UUCC0 CRBS1008 Crossed Roller Bearing For Robotic Arm | bore type:Round; d:0.7500 in; snap ring included:Without Snap Ring; B:27/32 in; inner ring width:21.44 mm; maximum rpm:6270 RPM; finish/coating:Uncoated; cage material:Nylon; series:RA-RR; outer ring width:15 mm; |
| KC045CP0 Bearing 4.5x5.25x0.375 Inch | seal type:Contact with Slinger; housing material:Cast Iron - Nickel P; d:20 mm; overall height:65 mm; duty type:Normal Duty; base width:38 mm; bore type:Round; D:86 mm to 105 mm; series:UCP200NPMZ2; bolt size:M10; |
| KF140CP0 Open Reali-slim Bearing In Stock, 14.000X15.500X0.750 Inches | B:600 mm; seal type:Contact with Flinger; radial static load capacity:1080 lbf; radial dynamic load capacity:2150 lbf; length through bore:0.866 in; lubrication type:Lubrication Fitting; replacement bearing:UC328; housing material:Cast Iron; series:UCFL300; mounting type:Two-Bolt Flange; |
| RE30025UUCC0P4/RE30025UUC1P4 Thin-section Inner Ring Division Crossed Roller Bearing | D:9-5/8" to; overall height:8.0625 in; bore type:Round; base to bore centerline:4.0000 in; series:UCSP200; base width:4-1/4 in; expansion type:Non-Expansion Bearin; d:3.4375 in; housing material:Cast Iron; replacement bearing:UC217-55; |
| JA042CP0 Thin Section Ball Bearings | Limiting speed:38000 r/min; Fatigue load limit Pu:0.036 kN; da min.:11.5 mm; r1,2 min.:0.3 mm; Basic dynamic load rating C:1.48 kN; Calculation factor kr:0.02; C:1 mm; Mass bearing:0.0058 kg; Basic static load rating C0:0.83 kN; B:5 mm; |
| RA18013UU Thin-section Outer Ring Division Crossed Roller Bearing | |
| KD120XP0 Bearing | bearing cage material:Aluminum; maximum axial movement:16 mm; axial dynamic load capacity:25.8 kN; cartridge outside diameter:11 in; replacement complete pillow block:01BCP503EX; radial dynamic load capacity:394 kN; outer ring outside diameter:9-1/2 in; replacement split bearing only:01B503EX; operating temperature range:-70 to +100 &de; series:01; |
Thin Section Ball Bearings - Metric Thin Section Bearings
Thin Section Ball Bearings were developed for applications where space limitations are of the utmost importance. As the name implies, the difference between the
N Series Thin-Section Ball Bearings Metric and Inch Designs
Extremely thin-section ball bearings and roller bearings contributing to downsizing, weight saving, and reduction of torque loss of robots, construction equipments,
HGT Thin Section Bearing
Items 1 - 10 of 31 - The HGT Thin Section Bearings produce contains seven series of open types and five series of sealed types, with bore diameter ranging from 1
What is a Thin Section Bearing and How Does it Reduce Cost?
Thin section bearings are a family of bearings designed from a limited number of widths and thicknesses (cross sections), with each cross section manufactured
Thin section ball bearings, metric bearings, roller bearings
The Kaydon Reali-Slim® inch-standard bearing is one of the most widely used thin section bearings in the world. Kaydon thin bearing solutions save weight,
Slim Section Bearings | Thin Section Bearings | Custom
Slim Section Bearings, Inc. is the manufacturing division of Ritbearing Corp., with experience in manufacturing that began in 1987. We are able to give our
Thin Section Ball Bearing | The Timken Company
Timken® thin section bearing line offers high accuracy and low profile design in standard stainless steel or chrome steel. Shop our full line including deep
Thin Section Ball Bearings - RBC Bearings
Use RBC's selection guide to help you determine which of RBC's Thin Section Ball Bearings are best suited for your design application
Thin Section Bearings Online
518 results - Thin Section Bearings Online Online shopping by VXB bearings the online bearing store and supplier, wholesale prices and same day shipping, next
Thin Section Ball Bearings | Alpine Bearing
Request a quote for Thin Section ball bearings from Alpine Bearing here. Same-day shipping available on in-stock items
KG160AR0/KG160CP0 /KG160XP0 Reail-silm Thin-section Bearings (16x18x1 Inch) Video