| No. | Brand | b | B | e | f | m | s | Q | X |
| J36611 | - | - | 51 mm | - | - | - | - | - | - |
| 1X | - | - | 12,7 mm | - | - | - | - | - | - |
| 18mm | - | 33 mm | - | - | - | - | - | - | - |
| 45# | - | - | 118 mm | - | - | - | 14 mm / Axial displa | - | - |
| 6D95 | Komatsu | - | 365 mm | - | - | - | - | - | - |
| 705-41-08240 | - | - | - | - | - | - | - | - | - |
| 25% | - | - | 14,26 mm | - | - | - | - | - | - |
| 4 | - | - | 16,000 mm | - | - | - | - | - | - |
| 30099AA040 | - | - | - | - | - | - | - | - | - |
| 6218 | - | - | 18 mm | - | - | - | - | - | - |
| 10 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 609 | NSK | - | - | - | - | - | - | - | - |
| [1 | - | - | 100 mm | - | - | - | - | - | - |
| NKR55 | - | - | - | - | - | - | - | - | - |
| 6005.2RSR | fag | - | 10 mm | - | - | - | - | - | - |
| ta3720z | IKO | - | - | - | - | - | - | - | - |
| 52204 | NSK | - | - | - | - | - | - | - | - |
| 12mm | - | - | - | - | - | - | - | - | - |
| 3mm | - | - | - | - | - | - | - | - | - |
| 12/15/18mm | - | - | - | - | - | - | - | - | - |
| 45bwd03 | - | - | - | - | - | - | - | - | - |
| 227g | INA | - | - | - | - | - | - | - | - |
| 90-321255/0-06045 Four-point Contact Ball Slewing Bearing 1105x1300x90mm | Bore Diameter (mm):63,5; Bearing number:HJ-486028; Basic dynamic load rating (C):123 kN; Fw:76,2 mm; Size (mm):63.5x95.25x44.45; C:44,45 mm; B:44,45 mm; Brand:NSK; d:63,5 mm; Outer Diameter (mm):95,25; |
| SD.850.20.00.C Four-point Contact Ball Slewing Bearing 634mmx848mmx56mm | d2:9,5 mm; h:5,4 mm; d1:5,5 mm; d:25 mm; Bore Diameter (mm):25; Tolerance perpendicularity (C):15; Bearing number:LMEF25UU; D1:62 mm; L:58 mm; D:40 mm; |
| E.1100.25.00.B External Gear Slewing Ring Bearing(1096*855*80mm) For Loader Cranes | Bore Diameter (mm):55; Size (mm):55x100x33.34; D:100 mm; Fw:66,9 mm; B:33,34 mm; Basic static load rating (C0):171 kN; Brand:CX; Basic dynamic load rating (C):119 kN; Weight:1,264 Kg; C:33,34 mm; |
| I.1200.32.00.C Internal Gear Flange Slewing Turntable Bearing(1200*912*90mm) For Mobile Trailers | N:20 mm; N1:25 mm; Brand:SNR; d:55 mm; Bore Diameter (mm):55; H1:25 mm; H:69,8 mm; Weight:5 Kg; L:241 mm; Basic dynamic load rating (C):52,5 kN; |
| 16350001 No Gear Slewing Ring Bearings (56.89*41.535*8.661inch) For Mining Shovels | Width (mm):37; B:37 mm; Category:Bearings; Weight / Kilogram:0; Minimum Buy Quantity:N/A; Inventory:0.0; Size (mm):38x64x37; Bore Diameter (mm):38; Brand:NSK; Manufacturer Name:NSK; |
| NK110 Kato Crane Swing Bearing Slewing Ring Bearing | Bore Taper:1/12; Da - Outer Ring Backing Diameter:566.000 mm; Cage Type:YMB; C0 - Static Radial Rating:7580000 N; R - Inner Ring To Clear Radius1:4.000 mm; Y1 - ISO Factor5:3.39; d:380.000 mm; r - Outer Ring To Clear Radius2:4.000 mm; Reference Thermal Speed Rating (Oil)7:560; D:620.000 mm; |
| KH-325E No Gear Slewing Ring Bearings (36.667*28.5*2.5inch) For Radar And Satellite Antennas | Material Description:Steel Backing, Bronz; D:39 mm; Harmonized Tariff Code:84833080; Minimum Buy Quantity:N/A; Inventory:0.0; Manufacturer Name:SCHAEFFLER GROUP; d:35 mm; Profile:Bushing With Flange; Nominal Bore:1.378 Inch | 35 Mill; Long Description:35MM Nominal Bore; 3; |
| Good Service XIU30/1090Y Cross Roller Bearing 908.8*1200*90mm | Y2 - ISO Factor10:2.31; Aa - Cage-Cone Backface Clearance:0.07 in; Bearing Weight:5.73 lb; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:6020 lbf; K - Factor7:1.34; C - Double Cup Width:2.125 in; R - Cone Backface To Clear Radius1:0.14 in; Ab - Cage-Cone Frontface Clearance:0.07 in; Design Units:Imperial; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:14000 lbf; |
| Supply XA 452935N Slewing Bearing 2760*3216.8*127mm | C:38 mm; B:38 mm; Size (mm):40x80x38; Bore Diameter (mm):40; D:80 mm; Bearing number:513246; d:40 mm; Brand:Timken; Width (mm):38; Outer Diameter (mm):80; |
| 3R6-63E9 External Gear Heavy Duty Slewing Ring Bearing(70.8*57.68*4.72inch) For Heavy Duty Cranes | Width (mm):25; Size (mm):100x140x25; Basic dynamic load rating (C):121 kN; d:100 mm; Bore Diameter (mm):100; Brand:CX; C:20 mm; D:140 mm; Weight:1,14 Kg; a:24 mm; |
| 9E-1B20-0223-1140 Slewing Bearing With External Gear Teeth 145x316x50mm | d:190 mm; B:55 mm; Bearing number:QJ 238; Angle (α):35 °; da min.:208 mm; Bore Diameter (mm):190; (Grease) Lubrication Speed:1 400 r/min; ra max.:3 mm; C:55 mm; Width (mm):55; |
| 131.45.2500 Slewing Bearing 2279x2721x231mm | Cr:15.2 kN; Inventory:0.0; Min operating temperature, Tmin:-20 °C; Lubrication hole on outer ring:Oui/Yes; Minimum Buy Quantity:N/A; Weight:0,055 Kg; Max operating temperature, Tmax:120 °C; C:17 mm; Fw:25 mm; Db max:35 mm; |
| XRB3010 RB3010 CRB3010 Cross Roller Bearing Size 30x55x10 Mm XRB 3010 RB 3010 CRB 3010 | Outer Diameter (mm):170; C:32 mm; B:32 mm; Bore Diameter (mm):95; Basic dynamic load rating (C):108 kN; D:170 mm; Weight:2,79 Kg; Brand:ZEN; Basic static load rating (C0):81,5 kN; Size (mm):95x170x32; |
| I.1016.20.00.B Slewing Ring Bearings | C:58 mm; Size (mm):200x360x58; d:200 mm; Brand:ISO; Angle (α):15 °; Width (mm):58; Outer Diameter (mm):360; a:66,5 mm; B:58 mm; Bore Diameter (mm):200; |
| Good Performance VA501455N Slewing Bearing 1317x1653.6x110mm | Bearing number:UCPG201; d:12 mm; H:33,3 mm; E:16 mm; L1:21 mm; D1:29 mm; J:49 mm; B1:31 mm; L:70 mm; Basic dynamic load rating (C):12,8 kN; |
| A6-14P3D No Gear Slewing Bearings(16.54*10.43*1.97inch) For Clarifiers And Thickeners | Size (mm):480x790x308; C:308 mm; D:790 mm; d:480 mm; B:308 mm; Basic dynamic load rating (C):8820 kN; Brand:ISB; (Grease) Lubrication Speed:481,95 r/min; Outer Diameter (mm):790; Bore Diameter (mm):480; |
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
A10-32N1A Internal Gear Slewing Ring Bearing(36.75*26.4*3.86inch) For Sewage And Water Treatment Equipment Video