| No. | Brand | b | B | e | f | m | s | Q | X |
| 18mm | - | - | - | - | - | - | - | - | - |
| 6208ZZE | Nachi | - | 20 mm | - | - | - | - | - | - |
| G22 | - | 30 mm | - | - | - | - | - | - | - |
| 2rs | - | - | - | - | - | - | - | - | - |
| 5/8" | - | - | - | - | - | - | - | - | - |
| CBW-F304CFPR; | - | - | 105,5 mm | - | - | - | - | - | - |
| FM3-20FT | Parker | - | - | - | - | - | - | - | - |
| 440X320mm | - | - | 19,000 mm | - | - | - | - | - | - |
| DKS15BH | - | - | - | - | - | - | - | - | - |
| 1.0 | - | - | 37 mm | - | - | - | - | - | - |
| 2-4mm | - | - | 74 mm | - | - | - | - | - | - |
| VIX500IE | Parker | - | - | - | - | - | - | - | - |
| 50kg | - | - | - | - | - | - | - | - | - |
| Omt160 | - | - | - | - | - | - | - | - | - |
| 8 | - | - | 14 mm | - | - | - | - | - | - |
| 6008 | - | - | - | - | - | - | - | - | - |
| 50-2LS | SKF | - | - | - | - | - | - | - | - |
| Pvp2-30-70 | - | - | - | - | - | - | - | - | - |
| 2K/BMSY/BMS/OMSY/BMS | - | - | 55 mm | - | - | - | - | - | - |
| 336DL | - | - | - | - | - | - | - | - | - |
| 215 | - | - | 25 mm | - | - | - | - | - | - |
| ST50K3 | NTN | - | 50,8 mm | - | - | - | - | - | - |
| 5/10/20pcs | - | - | - | - | - | - | - | - | - |
| (10 | - | - | 77 mm | - | - | - | - | - | - |
| SDM0730/22 Slewing Bearing For 28M Pump Truck | Inside Ring Width B:=Bearings1_Inside Ri; Housing Style:Two-Bolt Pillow Bloc; Bolt Hole Width N:11.1 mm; Base to Center Height H:30.16 mm; Dimension T:0.594 in; Center of Bearing from End S:6.4 mm; Total Width A:1.189 in; Weight:1.001 lb; Bearing Type:Ball Bearing; Bearing Number:GRAE17RRB; |
| L9-42E9Z Slewing Ring Bearing(47.04*35.63*3.54inch) With External Gears For Aerial Lifts | Ball Type:STEEL; Limiting Speed (Oil):17800 rpm; Cage Type:CR - Phenolic Outer; Da - Outer Ring Backing Diameter:148.0 mm; Bearing Weight:2.196 Kg; Design Units:METRIC; r - Outer Ring To Clear Radius3:2.0 mm; Ce - Dynamic Radial Rating1:129900 N; Limiting Speed (Grease):8900 rpm; Contact Angle:15 º; |
| XR766051 Crossed Roller Bearing | Seal Type:Viton Single Lip; Cor - Static Load Rating:305066 lbf; Bolt Size:4 x M30; Note:This product line wa; Dimension L:25.0 in; Housing Width:8.7 in; Bearing Type:Split Cylindrical Re; Series Type:Medium Series; Shaft Size:6-15/16 in; Dimension K:6.5 in; |
| RU148 Crossed Roller Bearing 90x210x25mm | D:35 mm; Limiting Speed - Grease:12,000 rpm; ra (max):0.6 mm; Basic dynamic load rating (C):14 kN; r min.:0.6 mm; Bearing number:7202BDB; B:11 mm; Bore Size:15 mm; Enclosure:Open; Width (mm):11; |
| 6 mm x 17 mm x 6 mm 130.25.630 Slewing Bearing 496x764x148mm | H:4 mm; da:52 mm; E:18,75 mm; J:80,2 mm; L:5 mm; Weight:0,865 Kg; Bore Diameter (mm):41,275; D:76,2 mm; T:57 mm; d:41,275 mm; Size (mm):6 mm x 17 mm x 6 mm ; |
| R8-46E3 Outer Gear Cross Roller Slewing Bearings(52.64*42.05*2.874inch) For Lift Truck Rotators | Mis-alignment Angle (a deg.):10; Bore Center to End of Rod (h):2.438; Bore Dia (d):0.5000; Radius (min) (rs):0.024; Bore Diameter (mm):12,7; Bearing Type - steel-on-steel:steelonsteel; Rod End Width (d2):1.312; Thread Size (G) - 1/2-20 UNF:1/220 UNF; Width (B):0.6250; Spherical Diameter (dk or Dk):0.937; |
| A18-89E1 External Gear Slewing Rings(99.8*78.38*6.62inch) For Tunnel Boring Machines | X:14 mm; Bearing number:RN2207-E-MPBX; Weight:0,27 Kg; Basic dynamic load rating (C):72 kN; Outer Diameter (mm):64; Basic static load rating (C0):65,5 kN; d1:48 mm; Bore Diameter (mm):35; Size (mm):35x64x23; r min.:1,1 mm; |
| 33 0541 01 Light Series Solid Section No Gear Slewing Ring Bearing(616*472*56mm)for Stacker Crane | Outer Diameter (mm):140; Flange Dia. (Dfl pm 0.5):170.000; Bearing number:AST650 F12014080; Bearing Outside Diameter Tolerance (Do tol.):140 +0.040 / +0.015; Bearing Bore after Mounting (di):120 +0.071 / +0.036; Bearing Outside Diameter, Nominal(Do):140.000; Material:Cast bronze with sol; Bearing Length Tolerance (B tol.) - -0.10 / -0.30:0.10 / 0.30; ID Chamfer Length (Ci):1.200; Brand:AST; |
| 16301001 Internal Gear Slewing Ring Bearings (102.5*85.36*7.44inch) For Utility Derricks | a:102,6 mm; db:403 mm; D:596,9 mm; da:428 mm; Brand:NSK; Basic dynamic load rating (C):1670 kN; d:368,3 mm; R:9,7 mm; C:60,325 mm; T:95,25 mm; |
| YRTC180 / YRTC 180 Rotary Table Bearing 180x280x43mm | D1:76.5 mm; B:74 mm; θ:50°; Bearing number:SESDM50 OP; Bore Diameter (mm):50; Size (mm):50x80x74; Outer Diameter (mm):80; Width (mm):74; Basic dynamic load rating (C):3 820 kN; W:2.6 mm; |
| RB25040 CRB25040 XRB25040 Cross Roller Bearing Size 250x355x40 Mm RB 25040 CRB 25040 XRB 25040 | Compatibility:HONDA / PRELUDE / e; Brand:CX; Bearing number:CX319; |
| HS6-16E1Z External Gear Slewing Ring Bearings (19.9*12*2.2inch) For Digger Derricks | Ab - Cage-Cone Frontface Clearance:2.3 mm; Aa - Cage-Cone Backface Clearance:0.8 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2250 lbf; db - Cone Backface Backing Diameter:45.97 mm; Da - Cup Frontface Backing Diameter:65.00 mm; da - Cone Frontface Backing Diameter:42.93 mm; D:66.675 mm; a - Effective Center Location3:-1.5 mm; B:15.875 mm; Cg - Geometry Factor:0.0694; |
| 200XRN28 Crossed Roller Bearing | K5:26 mm; H:115 mm; H5:8,6 mm; d:50 mm; Bore Diameter (mm):50; Weight:2,9 Kg; K3:17,5 mm; Thread (K2):M20; K4:12 mm; Basic dynamic load rating (C):15,1 kN; |
| HS6-33N1Z Internal Gear Slewing Ring Bearings (37.4*29.13*2.2inch) For Material Handling Equipment | Configuration:Single Row; Weight / Kilogram:0; db (max):89 mm; Bore Size:80 mm; Axial Load Factor Y1:1.42; Outside Diameter:125 mm; (Grease) Lubrication Speed:2900 r/min; Cone ra (max):1.5 mm; Axial Load Factor Y0:0.78; r2 min.:1.5 mm; |
| 131.45.2500 Slewing Bearing 2279x2721x231mm | Cr:15.2 kN; Inventory:0.0; Min operating temperature, Tmin:-20 °C; Lubrication hole on outer ring:Oui/Yes; Minimum Buy Quantity:N/A; Weight:0,055 Kg; Max operating temperature, Tmax:120 °C; C:17 mm; Fw:25 mm; Db max:35 mm; |
| Cross Roller Bearing RU42UUCC0/P2BGX - N | r1 - min.:1 mm; Brand:SKF; Basic dynamic load rating - C:1.1 kN; Limiting speed:365 r/min; Width (mm):18; D:60 mm; d:35 mm; Outer Diameter (mm):35; Size (mm):60x35x18; H:18 mm; |
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
L6-25P9ZD No Gear Slewing Rings(29.45*21.02*2.2inch) For Reclaimers Video