No. | Brand | b | B | e | f | m | s | Q | X |
3mm | - | 1.8 mm | - | - | - | - | - | - | - |
2K | Danfoss | - | - | - | - | - | - | - | - |
800d/1600d/1800d | - | - | - | - | - | - | - | - | - |
65.26201-7073c | - | - | - | - | - | - | - | - | - |
30x40x30 | - | - | 37 mm | - | - | - | - | - | - |
6310.ZZJ30D43A50 | - | - | 6,35 mm | - | - | - | - | - | - |
5pcs | - | - | - | - | - | - | - | - | - |
18mm | - | - | - | - | - | - | - | - | - |
1200X1000 | - | - | 43 mm | - | - | - | - | - | - |
663 | Bower | - | - | - | - | - | - | - | - |
18mm | - | - | 28 mm | - | - | - | - | - | - |
7000 | - | - | - | - | - | - | - | - | - |
L200 | - | - | - | - | - | - | 22 mm | - | - |
6206-2RS | - | - | 20 mm | - | - | - | - | - | - |
125 | fag | - | 23 mm | - | - | - | - | - | - |
Fg-372 | - | - | 40 mm | - | - | - | - | - | - |
6203-2RS | - | - | - | - | - | - | - | - | - |
J-21978-1 | - | - | 42 mm | - | - | - | - | - | - |
(5pcs) | - | - | 70 mm | - | - | - | - | - | - |
LR5305NPPU | - | - | - | - | - | - | - | - | - |
4FT | - | - | - | - | - | - | - | - | - |
1019 | SKF | - | 31 mm | - | - | - | - | - | - |
15mm | - | - | - | - | - | - | - | - | - |
1600 | NTN | - | - | - | - | - | - | - | - |
6310VVC3 | NSK | - | 10 mm | - | - | - | - | - | - |
60042RSC3GSR | koyo | - | 55,6 mm | - | - | - | - | - | - |
6008 | - | - | - | - | - | - | - | - | - |
RKS.060.25.1534 Four Point Contact Slewing Bearings(1619*1449*68mm) Without Gear For Stacker Crane | r1 min.:1 mm; Size (mm):25x62x22.5; Brand:LS; Outer Diameter (mm):62; Bore Diameter (mm):25; C:16,7 mm; B:16,5 mm; T:22,5 mm; D1:34,5 mm; dk:68 mm; |
130.40.1400 Three Row Roller Slewing Ring Bearing | D:540 mm; Outer Diameter (mm):540; Brand:CX; Bearing number:NU2260; Size (mm):300x540x140; C:140 mm; Fw:364 mm; B:140 mm; Basic static load rating (C0):3800 kN; Basic dynamic load rating (C):2400 kN; |
CRBC70045UU Crossed Roller Bearing 700X815X45mm | Y - ISO Factor9:2.19; db - Cone Backface Backing Diameter:41.40 mm; C1 - Dynamic Radial Rating (1 million revolutions)5:18800 lbf; K - Factor7:2.14; Cup Part Number:2520A; C0 - Static Radial Rating:21200 lbf; C90 - Dynamic Radial Rating (90 million revolutions)4:4880 lbf; Cage Type:Stamped Steel; Ab - Cage-Cone Frontface Clearance:1.5 mm; da - Cone Frontface Backing Diameter:39.62 mm; |
STN1120/32 Slewing Bearing For EBZ200 Boring Machine | r2 min.:3,5 mm; Weight:0,71 Kg; r1 min.:3,5 mm; Outer Diameter (mm):74; Bearing number:ZA-40BWD12FCA88**; D:74 mm; b:21 mm; d:40 mm; Width (mm):42; |
RB5013 XRB5013 Cross Roller Bearing Size 50x80x13 Mm RB 5013 XRB 5013 | Calculation factor (Y1):2,63; Product Group:B04311; Brand:NTN; B:43 mm; Inventory:0.0; Bearing number:22219BK; Width (mm):43; Da max.:158 mm; Bore Diameter (mm):95; da min.:107 mm; |
RKS.324012324001 Crossed Roller Slewing Bearings(1289*980*114mm) With External Gear Teeth For Textile Machine | Calculation factor - f0:0.02; B:103 mm; Calculation factor kr:17; Brand:SKF; d1:1118 mm; Basic dynamic load rating - C:819 kN; Mass bearing:410 kg; Calculation factor - kr:17; D:1320 mm; Reference speed:700 r/min; |
6392/2910G Slewing Bearing 2910x3520x220mm | Calculation factor - f0:7.9; Da max.:16.6 mm; d:6.35 mm; Width (mm):7,142; Outer Diameter (mm):6,35; Brand:SKF; D:19.05 mm; d2:8.5 mm; ra - max.:0.4 mm; Calculation factor f0:7.9; |
3R16-265N3 Internal Gear Heavy Duty Slewing Ring(279.59*248.504*10.55inch) For Climbing Cranes And Tower Cranes | B:7,92 mm; Size (mm):19.05x41.275x7.92; Basic static load rating (C0):4,4 kN; Weight:0,05 Kg; Bore Diameter (mm):19.05; Basic dynamic load rating (C):10,4 kN; Width (mm):7,92; C:7,92 mm; d:19.05 mm; Outer Diameter (mm):41,275; |
XA160407 Bearing 335*503.3*50mm | Weight:80 Kg; D:600 mm; E:565,5 mm; r2 min.:4 mm; S:6 mm; Outer Diameter (mm):600; Fatigue load limit (Pu):380; r4 min.:4 mm; rb max.:3 mm; Bore Diameter (mm):440; |
XRB40070 Cross Roller Bearing Size 400x580x70mm | B:54 mm; Reference speed:5000 r/min; Da max.:95 mm; r1 min.:1 mm; Bore Diameter (mm):70; Width (mm):54; ra max.:1 mm; Brand:SKF; Outer Diameter (mm):100; Bearing number:NA6914; |
VLA200544 Bearing | Bearing number:7238 A; Width (mm):55; (Grease) Lubrication Speed:2000 r/min; D:340 mm; Brand:CX; Basic dynamic load rating (C):303 kN; a:104 mm; Outer Diameter (mm):340; Angle (α):25 °; Basic static load rating (C0):390 kN; |
VSI200644 Bearing 546*716*56mm | Brand:NTN; Width (mm):75; T:75 mm; d:190 mm; Size (mm):190x290x75; Bearing number:323038; Bore Diameter (mm):190; Outer Diameter (mm):290; D:290 mm; |
MMXC1030 Crossed Roller Bearing | Bearing number:HK0709; Basic static load rating (C0):2,15 kN; Bore Diameter (mm):7; Size (mm):7x11x9; Width (mm):9; D:11 mm; Basic dynamic load rating (C):2,8 kN; (Grease) Lubrication Speed:16000 r/min; C:9 mm; Outer Diameter (mm):11; |
132.40.1250 Slewing Bearing 1055x1445x220mm | Dimension B:6.05 in; Y1 - Geometry Factor:2.90; Dimension H:1.38 in; Grease Lubrication - M/N Seal:1700 rpm; C - Dynamic Load (Basic):47800 lb; Dimension RVV:0.60 in; Grease Lubrication - B/C/O Seal:1400 rpm; Oil Lubrication - T Seal:3050 rpm; Oil Lubrication - B/C/O Seal:1400 rpm; Dimension G:2.900 in; |
HT10-60N1Z Internal Gear Slewing Ring Bearings (66*54.16*3.5inch) For Industrial Turntable | Width (mm):37; Brand:FAG; B:37 mm; Bore Diameter (mm):40; d:40 mm; D:72 mm; Size (mm):40x72x37; Bearing number:566719; Outer Diameter (mm):72; |
16278001 Internal Gear Slewing Ring Bearings (94.173*77.008*7.126inch) For Mining Equipment | d:20 mm; C:14 mm; Width (mm):14; B:14 mm; r min.:1 mm; Outer Diameter (mm):47; Bearing number:6204L11DDU; D:47 mm; Size (mm):20x47x14; Brand:NSK; |
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
L6-16P9ZD No Gear Slewing Rings(20.39*11.97*2.2inch) For Reclaimers Video