| No. | Brand | b | B | e | f | m | s | Q | X |
| [12 | - | - | 25,4 mm | - | - | - | - | - | - |
| 4 | - | - | - | - | - | 0,168 lbs / Weight | - | - | - |
| 100% | - | - | 28 mm | - | - | - | - | - | - |
| A1 | - | - | - | - | - | - | - | - | - |
| pc100-5 | - | - | 70 mm | - | - | - | - | - | - |
| (Har1005) | - | - | 308 mm | - | - | - | - | - | - |
| 1160X2400X28mm | - | - | 7 mm | - | - | - | - | - | - |
| 24034-BS-MB | - | - | - | - | - | - | - | - | - |
| 90% | - | - | 36 mm | - | - | - | - | - | - |
| 23000/oscillating | - | - | - | - | - | - | - | - | - |
| 2002-2009 | NSK | - | - | - | - | - | - | - | - |
| 15X21X4 | - | - | 30 mm | - | - | - | - | - | - |
| Ms700 | - | - | - | - | - | - | - | - | - |
| Swl50e | - | - | - | - | - | - | - | - | - |
| 315cc | - | - | - | - | - | - | - | - | - |
| SZLH400F | - | - | 276,225 mm | - | - | - | - | - | - |
| 2003-2005 | Dodge | - | 13 mm | - | - | - | - | - | - |
| (MB5503AM | - | - | - | - | - | - | - | - | - |
| 90% | INA | - | 50,8 mm | - | - | - | - | - | - |
| 6 | Rexroth | - | - | - | - | - | - | - | - |
| 1 | SKF | - | - | - | - | - | - | - | - |
| MKD071B-061-KP1-KN | Rexroth | - | - | - | - | - | - | - | - |
| 400602-00184 | - | - | 45 mm | - | - | 8,79 kg / Weight | - | - | - |
| 6KG | - | - | - | - | - | - | - | - | - |
| 1pcs | - | - | - | - | - | - | - | - | - |
| G5 | - | - | 13,8 mm | - | - | - | - | - | - |
| 20X32X7 | INA | - | - | - | - | - | - | - | - |
| XSI140614 Bearing 546*714*56mm | B - Cone Width:1.1721 in; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:10600 lbf; Design Units:Imperial; d:1.3750 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:3820 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:23500 lbf; a - Effective Center Location4:-0.34 in; Cone Part Number:3482; C0 - Static Radial Rating:26800 lbf; R - Cone Backface To Clear Radius3:0.03 in; |
| RKS.061.20.0744 Bearing | Weight:17 Kg; F:143 mm; Brand:NKE; r4 min.:3 mm; r2 min.:3 mm; Basic static load rating (C0):892 kN; Outer Diameter (mm):240; Bearing number:NJ2322-E-TVP3; B:80 mm; Width (mm):80; |
| 16285001 No Gear Slewing Ring Bearings (75.75*59.75*8.75inch) For Large Cranes | da - Cone Frontface Backing Diameter:33.53 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:2070 lbf; G1 - Heat Generation Factor (Roller-Raceway):10.8; Aa - Cage-Cone Backface Clearance:0 mm; C - Cup Width:10.668 mm; e - ISO Factor8:0.37; Design Units:Imperial; Y - ISO Factor9:1.62; Ab - Cage-Cone Frontface Clearance:1.5 mm; a - Effective Center Location3:-3.3 mm; |
| XR889059 Crossed Roller Bearing | B:114,3 mm; d:190 mm; Brand:Timken; Outer Diameter (mm):312; Bearing number:190RN92; r max:3 mm; Bore Diameter (mm):190; E:312 mm; D:340 mm; F:217 mm; |
| High Quality VSI 200844N Slewing Bearing 736*916*56mm | Outer Diameter (mm):47; H1:29,5 mm; Static load rating radial (C0):18,9 kN; D:47 mm; H:43 mm; Bore Diameter (mm):17; C:16 mm; Dynamic load rating axial (C):24,7 kN; Width (mm):16; B:9 mm; |
| HD550 Excavator KATO Three Row Slewing Bearing 1163*961*94mm | Outside Diameter:11.811 Inch | 300 Mi; bore type:Straight; s max.:3.7 mm; Brand:SKF; Snap Ring:No; r1,2 - min.:4 mm; Minimum Buy Quantity:N/A; da - min.:157 mm; db - min.:183 mm; Basic dynamic load rating - C:780 kN; |
| MTE-324T External Gear Slewing Ring Bearings (20.486*12.75*2.062inch) For Truck-mounted Cranes | Outer Diameter (mm):370,000; d:220,000 mm; H:120,000 mm; Brand:SNR; Width (mm):120,000; Size (mm):220x370x120; Bearing number:23144EMKW33; Bore Diameter (mm):220,000; D:370,000 mm; |
| 9E-1Z25-0675-0145 Crossed Roller Slewing Rings 573/816/90mm | Width (mm):19; Bearing number:K37x44x19; Bore Diameter (mm):37; B:19 mm; Brand:ISO; Ew:44 mm; Fw:37 mm; Outer Diameter (mm):44; Size (mm):37x44x19; |
| 10 mm x 35 mm x 11 mm CRBC3010UU Crossed Roller Bearing | B:8 mm; Basic dynamic load rating - C:0.24 kN; Basic static load rating - C0:0.16 kN; Width (mm):8; Bore Diameter (mm):35; Size (mm):10 mm x 35 mm x 11 mm ; Outer Diameter (mm):17; d:17 mm; Brand:SKF; Limiting speed:1400 r/min; |
| 02 3074 01 Slewing Ring Bearing | D:310 mm; F:196 mm; B:104,8 mm; C:104,8 mm; E:284 mm; Bore Diameter (mm):170; d:170 mm; Brand:Timken; Bearing number:170RF92; r max:3 mm; |
| 585DBS102y Four-point Contact Ball Slewing Bearing With Innter Gear | Bearing number:23068-K-MB-W33; Size (mm):340x520x133; Calculation factor (Y1):2,7; D:520 mm; Limiting speed:1300 r/min; B:133 mm; Brand:NKE; d:340 mm; r2 min.:5 mm; Calculation factor (Y0):2,6; |
| NRXT25030DD Crossed Roller Bearing | OD Chamfer Length (Co):1.200; Bearing Outside Diameter, Nominal(Do):44.000; Wall Thickness (S3):1.950; Shaft Size (ds) - 40 +0 / -0.039:40 +0 / 0.039; Average Clearance (Cd):0.1320; Bearing Length, Nominal (B):20.000; Bearing Type:metal with bronze an; Brand:AST; Outer Diameter (mm):44; Bore Diameter (mm):40; |
| L6-33P9ZD No Gear Slewing Rings(37.32*28.9*2.2inch) For Reclaimers | Y2:4,31; Brand:FAG; nG:5200 1/min / Limitin; ds:4,8 mm; e:0,23; Cr:345000 N / Dynamic l; Width (mm):41; Bore Diameter (mm):85; B:41 mm; Size (mm):85x180x41; |
| 130.45.2000 Three Row Roller Slewing Ring Bearing | finish/coating:Uncoated; Manufacturer Item Number:6222-Z; dynamic load capacity:151 kN; d1 ≈:138 mm; Category:Single Row Ball Bear; outer ring width:38 mm; Enclosure:1 Metal Shield; precision rating:Not Rated; Basic static load rating C0:118 kN; da max.:137.9 mm; |
| I.500.22.00.A Slewing Bearing | Width (mm):25; Bearing number:SF4007PX1; D:250 mm; Brand:NTN; Bore Diameter (mm):200; d:200 mm; Size (mm):200x250x25; Outer Diameter (mm):250; |
| SX011832 Crossed Roller Bearing 160X200X20mm | Dynamic Load Rating:24,400 N; Weight:0.290 Kg; Radial Clearance:0.005 to 0.020 mm; D:62 mm; Fillet Radius/Chamfer:1 mm; Width:23.8 mm; C:23.8 mm; da:36 mm; B:23.8 mm; Bearing number:5206A-2NS; |
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
MTE-145T External Gear Slewing Ring Bearings (12.286*5.709*1.968inch) For Truck-mounted Cranes Video