| No. | Brand | b | B | e | f | m | s | Q | X |
| 4*8 | - | - | - | - | - | - | - | - | - |
| SL185030-A-C3 | INA | - | - | - | - | - | - | - | - |
| 12X32X10 | - | - | - | - | - | - | - | - | - |
| 15mm | INA | - | 46 mm | - | - | - | - | - | - |
| 10w | - | - | - | 29 mm | - | - | 25,4 mm | - | - |
| 6125SFM75 | John Deere | - | - | - | - | - | - | - | - |
| Msg-44p-21slewing | - | - | 177,800 mm | - | - | - | - | - | - |
| A2FM | Rexroth | - | 12 mm | - | - | - | - | - | - |
| 40L | - | - | - | - | - | - | - | - | - |
| 6004.C3 | fag | - | - | - | - | - | - | - | - |
| 1220*2440 | - | - | - | - | - | - | - | - | - |
| Zx350 | Hitachi | - | 18 mm | - | - | - | - | - | - |
| HCB71904C.T.P4S.UL | - | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | 4,3 kg / Weight | - | - | - |
| 10PC | - | - | 40 mm | - | - | - | - | - | - |
| (MB5503AM | - | - | - | - | - | - | - | - | - |
| 1/4" | Parker | - | - | - | - | - | - | - | - |
| 220g | - | - | - | - | - | - | - | - | - |
| 20Y-26-22330 | - | - | - | - | - | - | - | - | - |
| 5 | - | - | 17 mm | - | - | - | - | - | - |
| 6206-ZZ | - | - | - | - | - | - | - | - | - |
| NJ214ECP | - | - | - | - | - | - | - | - | - |
| 21 | INA | - | - | - | 0,85 mm | - | - | - | - |
| 30x40x30 | - | - | 37 mm | - | - | - | - | - | - |
| H-4WEH22E74/6EW | Rexroth | - | - | - | - | - | - | - | - |
| 1220*2440mm | - | - | - | - | - | - | - | - | - |
| 99% | - | - | - | - | - | - | - | - | - |
| 22316 | NTN | 1,9 mm | - | - | - | - | - | - | - |
| 911-82008 | - | - | 280,000 mm | - | - | - | - | - | - |
| 134.50.4000.04K Slewing Bearing 3718x4282x270mm | Max operating temperature, Tmax:120 °C; C:10 mm; Da max.:6,5 mm; Weight:0,0031 Kg; Inventory:0.0; Fw:5 mm; Min operating temperature, Tmin:-20 °C; Cr:2.64 kN; Width (mm):10; Brand:NTN; |
| A10-47E1 External Gear Slewing Rings(54.3*42*4.63inch) For Tunnel Boring Machines | G2 - Heat Generation Factor (Rib-Roller End):26.7; G1 - Heat Generation Factor (Roller-Raceway):125.3; Series:30315M; C - Cup Width:31.000 mm; D:160.000 mm; e - ISO Factor3:0.35; Da - Cup Frontface Backing Diameter:150.10 mm; K - Factor2:1.69; Db - Cup Backface Backing Diameter:145.03 mm; Design Units:METRIC; |
| Supply VA220407N Slewing Bearing 335*503.3*50mm | Bearing number:KRV 26 B; Manufacturer Name:SKF; Maximum dynamic radial loads Fr max.:11.4 kN; Category:Bearings; B:36 mm; Grease fitting:NIP A1x4.5; G1:12 mm; C1:0.6 mm; Product Group:B04144; Maximum static radial loads - F0r:16.3 kN; |
| Super Precision XA 341455N Slewing Bearing 1317*1653.6*95mm | d:16 mm; Brand:LS; Bearing number:SABP16N; B:21 mm; Bore Diameter (mm):16; |
| 1248DBS104y Four-point Contact Ball Slewing Bearing With Innter Gear | Category:Needle Non Thrust Ro; Product Group:B04144; D:29 mm; Separable:No; Cur:3450 N / Fatigue lim; Manufacturer Item Number:NK21/16; Weight / LBS:0.062; Width:0.63 Inch | 16 Milli; C:16 mm; Outer Diameter (mm):29; |
| 16338001 External Gear Slewing Ring Bearings (23.333*13.75*2.75inch) For Wind Turbines | Dimension L1:66.7 mm; Center of Bearing from End S:24.6 mm; Static Load Rating:5210 lbf; Seal Type:Tri-Ply Seal; Total Length L:200.00 mm; Bolt Hole Spacing J:158.00 mm; Base to Center Height H:55.56 mm; Total Height H2:112.7 mm; Foot Height H1:17.7 mm; Housing Style:Two-Bolt Pillow Bloc; |
| SD.1500.32.00.C Four-point Contact Ball Slewing Bearing 1205mmx1500mmx90mm | d5:8 r/min; ra max.:3 mm; C:160 mm; n:15 mm; Calculation factor (Y0):2,01; Calculation factor (e):0,33; Basic static load rating (C0):5400 kN; Basic dynamic load rating (C):2600 kN; r min.:4 mm; Fatigue load limit (Pu):360; |
| 01-0947-00 External Gear Slewing Ring Bearing(1094*833*82mm)for Construction Machinery | Weight / LBS:11.108; Enclosure:Open; Outside Diameter:7.087 Inch | 180 Mil; Basic static load rating C0:96.5 kN; Width (mm):41; Fatigue load limit Pu:3.55 kN; series:63; ra - max.:2.5 mm; finish/coating:Uncoated; Long Description:85MM Bore; 180MM Out; |
| RKS.222605101001 Crossed Roller Slewing Bearings(1144*868*85mm) Without Gear Teeth For Medical Equipment | Pillow/Plummer Block Style:Split Cylindrical Ho; Bearing Type:Split Cylindrical Ex; Dimension J1:38.5 in; Cor - Static Load Rating:920143 lbf; Maximum Speed:500 rpm; Dimension H1:3.1 in; Dimension J2:30.0 in; Shipping Weight:3834 lb; Series Type:Heavy Series; Dimension H2:40.7 in; |
| XD.10.0686 Crossed Roller Bearing | c1 max.:0.4 mm; D:4,763 mm; c2 min.:0.2 mm; Bearing number:PCZ 0203 E; Coefficient of friction µ min.:0.03; Mass bushing:0.00034 kg; Bore Diameter (mm):3,175; c1 min:0,1 mm; Basic dynamic load rating (C):1,2 kN; Housing bore range min.:4.757 mm; |
| Slewing Bearing RKS.062.25.1754 | Y0 - ISO Factor4:2.11; D:259.993 mm; C1(2) - Dynamic Radial Rating (Two-Rows):1080000 N; Da - Outer Ring Backing Diameter:234.000 mm; e - ISO Factor3:0.32; da - Inner Ring Backing Diameter:157.000 mm; Y1 - ISO Factor5:3.15; Superseded Part:22324YMW800; Reference Thermal Speed Rating (Oil)7:2200; B - Outer Ring Width:86.000 mm; |
| 9E-1B25-0537-1196 Slewing Bearing With External Gear 417x688.8x72mm | Width (mm):177,800; B:177,800 mm; C:177,800 mm; d:300,000 mm; Brand:NTN; Bore Diameter (mm):300,000; D:540,000 mm; Size (mm):300x540x177.800; Outer Diameter (mm):540,000; Bearing number:RNU6028; |
| Good Performance XIU25/500 Cross Roller Bearing 360*602*75m | Basic static load rating C0:15.3 kN; Rα:45 °; Number of Mounting Holes:2; R1:3 mm; J6:153 mm; RG:1/4-28 UNF; Size (mm):30x35x46; Adapter sleeve:H 2307; B1:43 mm; Basic dynamic load rating C:25.5 kN; |
| 9O-1Z40-2248-55 Crossed Roller Slewing Rings 2095/2420/135mm | Pre Install Clearance Min:0.0024 in; Thread Size J:1 1/4-7UNC; Dimension SA:4.03 in; Dimension C:5.13 in; Oil Lubrication - M/N Seal:1400 rpm; Oil Lubrication - T Seal:2400 rpm; Shaft Size :80 mm; C0 - Static Load:87200 lb; Eng Internal Radial Clearance - Min:0.0024; Grease Lubrication - T Seal:2000 rpm; |
| I.1100.22.00.A-T Slewing Ring Bearing | N:16 mm; A2:19 mm; A:34 mm; J:130 mm; Inventory:0.0; Bolt (G):13,9; Product Group:M06110; d:35 mm; S:17,5 mm; H:161 mm; |
| 12-200541/1-02223 Slewing Bearing With Internal Gear 444/616/56mm | Mass:0.02 kg; Bearing number:HK1816D; Cr:11.8 kN; Manufacturer Name:NTN; Size (mm):18x24x16; Characteristic rolling element frequency, BSF:9.9 Hz; Bore Diameter (mm):18,000; Minimum Buy Quantity:N/A; Product Group:B04144; C0r:17.3 kN; |
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
RK6-25E1Z External Gear Slewing Ring Bearings (29.15*21.03*2.205inch) For Stretch Wrapping Machines Video