RKS.921155203001 Crossed Roller Slewing Bearings(403*233*55mm) Without Gear Teeth For Medical Equipment

No.	Brand	b	B	e	f	m	s	Q	X
8mm/12mm	INA	-	-	-	-	-	-	-	-
Nh4cl	-	-	18,000 mm	-	-	-	-	-	-
3mm	-	-	-	-	-	-	-	-	-
6202	-	-	-	-	-	-	-	-	-
NKIA5906	INA	-	84,000 mm	-	-	-	-	-	-
52Pc	-	-	-	-	-	-	-	-	-
2x	TRW	-	100 mm	-	-	-	-	-	-
J0922JR-KMSN	Parker	-	120,000 mm	-	-	-	-	-	-
M-SEW6	Rexroth	-	-	-	-	-	-	-	-
A11VLO60	INA	-	19 mm	-	-	-	-	-	-
18mm	-	-	23,8 mm	-	-	-	-	-	-
5309-A-Z/C3	SKF	-	-	-	-	-	-	-	-
TRB-1220	koyo	-	-	-	-	-	-	-	-
2.5mm	-	-	-	-	-	-	-	-	-
NUP2320	NSK	-	8 mm	-	-	-	-	-	-
Pc400-7	-	-	-	-	-	-	-	-	-
SHS35VSSF	thk	-	-	-	-	-	-	-	-
1795	-	-	30,886 mm	-	-	-	-	-	-
1150*730mm	-	16.7 mm	-	-	-	-	-	-	-
Adk83009	-	0,95 mm	-	-	-	-	-	-	-
6226ZZSC3	NSK	-	436 mm	-	-	-	-	-	-
ACQ50	-	-	-	-	-	-	-	-	-
51108	-	-	25,000 mm	-	-	-	-	-	-

9E-1B40-0613-0632 Four-point Contact Ball Slewing Bearing With External Gear Teeth	Ew:38 mm; Outer Diameter (mm):38; Bore Diameter (mm):30; Weight:0.036 Kg; Bc:18 mm; Basic static load rating (C0):33 kN; (Grease) Lubrication Speed:8500 r/min; Fw:30 mm; Brand:NTN; Basic dynamic load rating (C):25 kN;
CRBS1108 Crossed Roller Bearing	Bearing:23232K; Seal Type:Taconite; L:550.00 mm; Housing Mass:54.5 Kg; A3:315 mm; Cage Type:EJ; Adapter Sleeve1:H2332; H:344 mm; H2:60.00 mm; Locating Rings (width x OD):SR290X5;
CRBC40035UU Crossed Roller Bearing	r - Outer Ring To Clear Radius3:0.3 mm; Cage Type:CR - Phenolic Outer; Ce - Dynamic Radial Rating1:4980 N; Bearing Width:9 mm; Contact Angle:25 º; Limiting Speed (Oil):115800 rpm; d:15 mm; D:32 mm; Limiting Speed (Grease):57900 rpm; Bearing Weight:0.027 Kg;
720DBS207y Four-point Contact Ball Slewing Bearing With External Gear	D:5.5000 in; r - Cup Backface To Clear Radius1:0.190 in; Cg - Geometry Factor:0.13; Da - Cup Frontface Backing Diameter:5.25 in; Design Units:Imperial; Series:575; Y - ISO Factor3:1.49; e - ISO Factor2:0.4; C - Cup Width:1.1250 in; Cup Part Number:572XS;
China XA 453170N Slewing Bearing 29953436.8127mm	r min.:1,5 mm; C:25 mm; Basic dynamic load rating (C):99 kN; Weight:4,2 Kg; Bore Diameter (mm):160; Size (mm):160x240x25; B:25 mm; d:160 mm; Outer Diameter (mm):240; Bearing number:16032;
260DBS269y Slewing Bearing	Width (mm):11,112; Outer Diameter (mm):41,275; d:19,05 mm; B:11,112 mm; Bore Diameter (mm):19,05; Size (mm):19.05x41.275x11.112; Weight:0,0447 Kg; D:41,275 mm; Brand:CYSD; C:11,112 mm;
VU250433 Bearing 34452255mm	Bearing number:6202-2RSR; Size (mm):15x35x11; d1:21,1 mm; C0r:3750 N / Static load; Cr:8200 N / Dynamic loa; D2:30,9 mm; d:15 mm; B:11 mm; D:35 mm; da min:19,2 mm;
KH-125E External Gear Slewing Ring Bearings (16.58.6252.5inch) For Robots And Medical Equipment	Rolling Element:Ball Bearing; Housing Style:2 Bolt Pillow Block; B:44,501 mm; Brand:INA; N1:9,246 mm; Minimum Buy Quantity:N/A; Bolt Spacing Maximum:4.449 Inch \| 113Mill; Housing Material:Cast Iron; N:11,989 mm; Other Features:Single Row \| Low Bas;
E.505.20.00.B External Gear Light Type Slewing Ring Bearing(503.334256mm) For Food Industry Machinery	UPC Code:087796314092; Cage Type:EJ; Reference Thermal Speed Rating (Oil)7:1000; C1(2) - Dynamic Radial Rating (Two-Rows):2280000 N; Y0 - ISO Factor4:2.28; d:240.000 mm; r - Outer Ring To Clear Radius2:3.0 mm; Bearing Weight:64.900 Kg; C0 - Static Radial Rating:3330000 N; Superseded Part:23148CJW507C08C3;
Crossed Roller Slewing Bearing With Internal Gear RKS.211430101001	Limiting Speed - Grease:2,600 rpm; Cy:8.4 mm; Configuration:Double Row; Radial Clearance:0.030 to 0.058 mm; Dx:185 mm; Enclosure:Snap Ring Groove wit; Dynamic Load Rating:149,000 N; Fillet Radius/Chamfer:2.1 mm; da:107 mm; d:95 mm;
H7-43N3A Inner Gear Slewing Ring Bearing(45.837.83.84inch) For Water Treatment Equipment	C90 - Dynamic Radial Rating (90 million revolutions)4:105000 N; Aa - Cage-Cone Backface Clearance:3 mm; Y - ISO Factor9:1.25; Db - Cup Backface Backing Diameter:230.89 mm; r - Cup Backface To Clear Radius2:2.03 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:85900 N; Cup Part Number:Y32936M; C - Cup Width:34 mm; D:250 mm; Da - Cup Frontface Backing Diameter:244.1 mm;
CRBH 208A Bearing	Bearing number:36686/36620; D:193,675 mm; R:1,5 mm; C:23,02 mm; Outer Diameter (mm):193,675; Width (mm):28,575; Bore Diameter (mm):142,875; r:1,5 mm; Size (mm):142.875x193.675x28.5; d:142,875 mm;
RKS.312290202001 Crossed Roller Slewing Bearings(13161082105mm) With Internal Gear Teeth For Industrial Robot Arm	Housing Bore Dia. (Dh) - 210 +0.046 / -0:210 +0.046 / 0; Bearing Length Tolerance (B tol.) - +0 / -0.40:+0 / 0.40; ID Chamfer Angle (B deg.):45; Brand:AST; Shaft Size (ds) - 205 -0.170 / -0.216:205 0.170 / 0.216; Bearing Bore after Mounting (di) - 210 +0.115 / -0:210 +0.115 / 0; Material:Wrapped bronze with; Bearing Length, Nominal (B):80.000; OD Chamfer Length (Co):1.800; Bearing number:AST090 20580;
02 0820 00 Internal Gear Slewing Bearing(93567482mm)for Lifting Machinery	Bore Diameter (mm):65; D:140 mm; Size (mm):65x140x51; Outer Diameter (mm):140; Brand:Fersa; Width (mm):51; d:65 mm; Bearing number:32313F;
30 mm x 47 mm x 23 mm Crossed Roller Slewing Bearing RKS.160.14.0844	Brand:NTN; D:170,000 mm; Bearing number:7022BDBT; C:84,000 mm; Bore Diameter (mm):110,000; B:84,000 mm; Outer Diameter (mm):170,000; Size (mm):30 mm x 47 mm x 23 mm ; d:110,000 mm; Width (mm):84,000;
High Quality VA300685N Slewing Bearing 577829.968mm	Basic static load rating (C0):48 kN; Width (mm):12,7; (Grease) Lubrication Speed:2100 r/min; Bearing number:M-3281; Basic dynamic load rating (C):25,4 kN; Weight:0,07 Kg; Size (mm):50.8x60.325x12.7; Fw:50,8 mm; C1:3,05 mm; Outer Diameter (mm):60,325;

Slewing Ring Bearings

Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...

Slewing Rings & Turntable Bearings - Motion

Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...

Slewing Rings - National Precision Bearing

We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...

Slewing ring bearings, turntable bearings – FH Slewing ...

We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...

Slewing bearings | SKF

Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...

Messinger Slewing Ring Bearing

Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...

Slewing ring bearings, turntable bearings | Kaydon Bearings

HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...

- The Latest in Slewing Ring Bearing Technology - Igus

iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.

Slewing Rings (Turntable Bearings) Components - Silverthin

Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.

Slew / Turntable Bearings | Ball-Bearing Slewing Rings

The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.

Min.Order Quantity	1 pcs
Price	Negotiable

RKS.921155203001 Crossed Roller Slewing Bearings(40323355mm) Without Gear Teeth For Medical Equipment

Product Features