No. | Brand | b | B | e | f | m | s | Q | X |
36.5 | Parker | - | - | - | - | - | - | - | - |
45221 | Bower | - | 25 mm | - | - | - | - | - | - |
71 | Danfoss | - | - | - | - | - | - | - | - |
99.999% | - | - | - | - | - | - | - | - | - |
NUP2320 | NSK | - | 8 mm | - | - | - | - | - | - |
H715310 | SKF | - | 13 mm | - | - | - | - | - | - |
En417 | - | - | - | - | - | - | - | - | - |
708-2L-23880 | - | - | - | - | - | - | - | - | - |
600 | fag | - | - | - | - | - | - | - | - |
DH220-3 | - | - | - | - | - | - | - | - | - |
600ml | - | - | - | - | - | - | - | - | - |
304 | - | - | - | - | - | - | - | - | - |
2306S | NTN | - | - | - | - | - | - | - | - |
9mm | - | - | - | - | - | - | - | - | - |
6P-110-29 | Parker | - | - | - | - | 100 g / Weight | - | - | - |
20x27x4mm | - | - | 16 mm | - | - | - | - | - | - |
46% | - | - | - | - | - | - | - | - | - |
1200X1000 | - | - | 24 mm | - | - | - | - | - | - |
YG224E3L | Rexnord | - | 50 mm | - | - | - | - | - | - |
1.Manufacturer | - | - | 7 mm | - | - | - | - | - | - |
30cbm | - | - | - | - | - | - | - | - | - |
Msg-44p-21slewing | - | - | 177,800 mm | - | - | - | - | - | - |
XRB700150 Cross Roller Bearing Size 700x1020x150mm | Cr:445000 N / Dynamic l; C0r:520000 N / Static lo; rmin:2 mm; Size (mm):90x160x52.4; Y1:2,2; m:4,3 kg / Weight; Y0:2,15; nG:4250 1/min / Limitin; D:160 mm; da min:101 mm; |
260DBS205y Four-point Contact Ball Slewing Bearing With External Gear | Shaft Diameter db:100 mm; J1:58 mm; UPC Code:999999999; N:18 mm; End Cover1:EC218; A2:158 mm; Locating Rings (width x OD):SR160X6.25; J:280.00 mm; Bearing:23218; A1:100 mm; |
9E-1Z30-0980-16 Crossed Roller Slewing Rings 868/1144/100mm | Dimension B2:0.531 in; Dimension S1:26.9 mm; Set Screw Size:1/4-20; Dimension M:0.142 in; Center of Bearing from End S:17.5 mm; Weight:0.50 lb; Sub Series:G1…KPPB2,3,4; Outside Diameter D:2.047 in; Material:Bearing Steel; Number of Set Screws:2; |
310DBS201y Slewing Bearing | Basic dynamic load rating (C):30,7 kN; D:68 mm; r:0,3 mm; Size (mm):55x60x20; Basic static load rating (C0):72,4 kN; Brand:Timken; C:20 mm; Outer Diameter (mm):60; Ew:60 mm; Width (mm):20; |
STF2150/45CWH Slewing Bearing For 150T Crawler Crane | D1:1338 mm; da - min.:1203 mm; Basic dynamic load rating C:761 kN; Outer Diameter (mm):1180; ra - max.:5 mm; Limiting speed:480 r/min; Reference speed:560 r/min; da min.:1203 mm; Da max.:1397 mm; Fatigue load limit - Pu:27.5 kN; |
MMXC1960 Crossed Roller Bearing | d:95 mm; D:145 mm; Basic static load rating (C0):227,36 kN; Size (mm):95x145x37; Basic dynamic load rating (C):139,16 kN; (Grease) Lubrication Speed:5432 r/min; Weight:2,10 Kg; Brand:ISB; Bore Diameter (mm):95; B:37 mm; |
R8-42E3 Outer Gear Cross Roller Slewing Bearings(48.24*38.39*2.874inch) For Lift Truck Rotators | Bearing number:DAC3577W-2CS72; Size (mm):35x77x42; D:77 mm; Brand:KOYO; Width (mm):42; B:42 mm; Bore Diameter (mm):35; d:35 mm; Outer Diameter (mm):77; |
China XA 280845N Slewing Bearing 730*1008*87mm | Brand:NTN; da min.:90 mm; Basic static load rating (C0):139 kN; a:59 mm; 2B:52 mm; Bore Diameter (mm):80; r min.:2 mm; Angle (α):40 °; D:140 mm; ra max.:2 mm; |
EX60-5 Excavator HITACHI Double Row Slewing Bearing 774*554*78mm | B1:45 mm; Basic static load rating (C0):29,4 kN; N:20 mm; N1:22 mm; d:47,625 mm; H1:24 mm; Bore Diameter (mm):47,625; J:171 mm; Width (mm):63,5; L1:70 mm; |
6392/2910G Slewing Bearing 2910x3520x220mm | Calculation factor - f0:7.9; Da max.:16.6 mm; d:6.35 mm; Width (mm):7,142; Outer Diameter (mm):6,35; Brand:SKF; D:19.05 mm; d2:8.5 mm; ra - max.:0.4 mm; Calculation factor f0:7.9; |
XD.10.0686 Crossed Roller Bearing | c1 max.:0.4 mm; D:4,763 mm; c2 min.:0.2 mm; Bearing number:PCZ 0203 E; Coefficient of friction µ min.:0.03; Mass bushing:0.00034 kg; Bore Diameter (mm):3,175; c1 min:0,1 mm; Basic dynamic load rating (C):1,2 kN; Housing bore range min.:4.757 mm; |
2693DBS101t Four-point Contact Ball Slewing Bearing With Innter Gear | Basic dynamic load rating - C:72 kN; ra - max.:0.3 mm; r2 - min.:0.6 mm; Outer Diameter (mm):42; M:2 mm; B:25 mm; dk:35.5 mm; d:20 mm; rb max.:0.6 mm; Constant - KM:330; |
XA120235-N Cross Roller Slewing Ring Bearing For Industrial Manipulator | Outer Diameter (mm):110; B2:8 mm; Size (mm):50x110x27; r2 min.:2 mm; r1 min.:2 mm; F:65 mm; d1:71,2 mm; r4 min.:2 mm; d:50 mm; D1:92 mm; |
16348001 External Gear Slewing Ring Bearings (159.843*141.732*6.142inch) For Wind Turbines | Size (mm):95x170x32; d:95 mm; Width (mm):32; C:32 mm; D:170 mm; Brand:ISO; Bearing number:6219 ZZ; Bore Diameter (mm):95; B:32 mm; Outer Diameter (mm):170; |
336DBS204y Slewing Bearing | θ:50 mm; h:15,1 mm; Outer Diameter (mm):52; Basic dynamic load rating (C):3 400 kN; Brand:NTN; Bearing number:KLM35P; Weight:0,34 Kg; Width (mm):70; Size (mm):35x52x70; D1:49 mm; |
XU120179 Cross Roller Slewing Ring Bearing For Machine Tools | B:30 mm; Weight:0,18 Kg; ra max.:0,3 mm; Basic static load rating (C0):65,5 kN; d:28 mm; Size (mm):28x45x30; Fatigue load limit (Pu):8,3; Da max.:43 mm; D:45 mm; Bore Diameter (mm):28; |
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
07 1075 01 Internal Gear Slewing Bearing(1175*961*90mm)for Lifting Machinery Video