| No. | Brand | b | B | e | f | m | s | Q | X |
| ST4 | NTN | - | - | - | - | - | - | - | - |
| JLM716610 | Timken | - | 73 mm | - | - | - | - | - | - |
| PC450-8 | - | - | - | - | - | - | - | - | - |
| 9mm | INA | - | 14 mm | - | - | - | - | - | - |
| 33274499 | INA | - | 272 mm | - | - | - | - | - | - |
| SK045 | - | - | 325 mm | - | - | - | - | - | - |
| 21309 | SKF | - | - | - | - | - | - | - | - |
| 12mm | - | - | - | - | - | - | - | - | - |
| 190gr | - | - | - | - | - | - | - | - | - |
| FWG-1 | - | - | - | - | - | - | - | - | - |
| 12mm | - | - | - | - | - | - | - | - | - |
| (5x11x4 | - | - | - | - | - | - | - | - | - |
| [20pcs] | - | - | - | - | - | - | - | - | - |
| 71915AC.T.P4A | - | - | - | - | - | 0,63 kg / Weight | - | - | - |
| 2208ETN9 | SKF | - | - | - | - | - | - | - | - |
| 10 | - | - | - | - | - | - | - | - | - |
| 1160X2400X28mm | - | - | 135 mm | - | - | - | - | - | - |
| 15mm | - | - | - | - | - | - | - | - | - |
| 315cc-100-cc | - | - | - | - | - | - | - | - | - |
| D4CB | INA | - | - | - | - | - | - | - | - |
| Srx715 | - | - | - | - | - | - | - | - | - |
| 510016 | Timken | - | 38,000 mm | - | - | - | - | - | - |
| 20" | - | - | - | - | - | - | - | - | - |
| PC350 | - | - | 24 mm | - | - | - | - | - | - |
| 320D | - | - | - | - | - | - | - | - | - |
| 2K/BMSY/BMS/OMSY/BMS | - | - | 55 mm | - | - | - | - | - | - |
| 40 | - | - | - | - | - | - | - | - | - |
| 7X14X3.5Mm | - | - | 13.5 mm | - | - | - | - | - | - |
| SR16UU | Nippon | - | - | - | - | - | - | - | - |
| 0457XRN060 Precision Cross Taper Roller Bearing | Dimension E:2.75 in; Dimension G:4.2500 in; Pre Install Clearance Max:0.0031 in; Shaft Tolerance:0.0020 in; Grease Lubrication - M/N Seal:1600 rpm; Shaft Size :2-3/4 in; Dimension D Max:10.44 in; Oil Lubrication - M/N Seal:1600 rpm; Dimension D Min:9.06 in; Pre Install Clearance Min:0.0020 in; |
| A8-39E12 External Gear Slewing Rings(42.598*34.88*3.23inch) For Tunnel Boring Machines | Inch - Metric:Metric; Noun:Bearing; Outer Diameter (mm):62; Category:Cam Follower and Tra; Maximum static radial loads F0r max.:49 kN; D:62 mm; Basic static load rating C0:62 kN; Mass support roller:0.48 kg; Enclosure:Sealed; Relubricatable:Yes; |
| VLU200644 Flange Without Gear Type Slewing Ring Bearing (748*534*56mm)for Robot Palletizer | Bearing Weight:0.4 Kg; Design Units:Imperial; Ab - Cage-Cone Frontface Clearance:1.5 mm; Cup Part Number:2523-S; R - Cone Backface To Clear Radius1:0.760 mm; Series:2500; Da - Cup Frontface Backing Diameter:65.00 mm; Y - ISO Factor9:2.19; a - Effective Center Location3:-8.6 mm; Cg - Geometry Factor:0.0656; |
| VSA201094-N Light External Gear Type Slewing Ring Bearing(1198*1022*56mm)for Industial Automation | S:19 mm; Weight:3,5 Kg; Width (mm):49,2; (Refer.)Unit mass(kg):3.5; C0r:20.3; Cr:32.7; Nipple size:1/4-28UNF; Bore Diameter (mm):40; H1:21 mm; N:20 mm; |
| F017062104 Slewing Ring 256x360x19.05mm | Weight / Kilogram:0.651; Product Group:B04334; cup width:21 mm; static load capacity:115000 N; Outer Diameter (mm):95; B:26 mm; Manufacturer Name:NTN; manufacturer product page:Click here; T:27 mm; d:60 mm; |
| 1787/1075G2K Slewing Bearing 1075x1424x120mm | Width (mm):13; ra1 max.:0,6 mm; 2B:26 mm; Basic static load rating (C0):14,4 kN; B:13 mm; Size (mm):15x42x13; ra max.:1 mm; Da max.:36,5 mm; a:15 mm; da min.:20,5 mm; |
| 130.32.900 Slewing Bearing 736x1064x182mm | r - Cup Frontface To Clear Radius2:0.03 in; db - Cone Backface Backing Diameter:2.72 in; Design Units:Imperial; K - Factor7:1.27; d:2.3622 in; Cg - Geometry Factor11:0.111; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:13200 lbf; Cone Part Number:29582; D:4.4375 in; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:51100 lbf; |
| RE12025UUC0 High Precision Cross Roller Ring Bearing | D:120 mm; Basic static load rating (C0):244,2 kN; Bearing number:RNA 4917; C:35 mm; Width (mm):35; Da max.:113,5 mm; Outer Diameter (mm):120; Weight:0,705 Kg; Basic dynamic load rating (C):109,8 kN; Size (mm):100x120x35; |
| A18-80N1 Internal Gear Slewing Ring Bearing(89*70.267*4.88inch) For Sewage And Water Treatment Equipment | Outer Diameter (mm):110; Width (mm):16; Bore Diameter (mm):80; Bearing number:61916-2RS; d:80 mm; Basic static load rating (C0):20 kN; Basic dynamic load rating (C):24,6 kN; B:16 mm; D:110 mm; C:16 mm; |
| PC100-3 Excavator KOMATSU Double Row Slewing Bearing 1112*872.5*75mm | Manufacturer Internal Number:70737; Category:Cylindrical Roller B; Nlim (oil):5,500 rpm; Fw:70,8 mm; Minimum Buy Quantity:N/A; Manufacturer Item Number:NU410; Retainer:Yes; Manufacturer Name:NTN; db min:73 mm; Separable:Inner Ring - Both Si; |
| China XI 341615N Cross Roller Bearing 1416*1753*95mm | r min.:1,5 mm; Da:207 mm; Bearing number:T-E-M231649D/M231610; Sa:4 mm; Brand:NTN; C:174,625 mm; Width (mm):174,625; Size (mm):152.4x222.25x174.625; Bore Diameter (mm):152,4; Weight:24,7 Kg; |
| CRBH7013A Crossed Roller Bearing 70X100X13mm | M:64,37 mm; G:108 mm; J:10 mm; E:63,2 mm; K:74 mm; Brand:ILJIN; I:55,5 mm; H:16,5 mm; Bore Diameter (mm):31,769; d:31,769 mm; |
| RKS.161.14.0844 Crossed Roller Slewing Bearings(950*774*56mm) With External Gear For Industrial Automation | Basic static load rating (C0):8,3 kN; Fw:14 mm; Bore Diameter (mm):14; Weight:0,0048 Kg; Bc:10 mm; Brand:NBS; Ew:18 mm; Outer Diameter (mm):18; Basic dynamic load rating (C):6,8 kN; Bearing number:K 14x18x10; |
| SH240-3 Excavator SUMITOMO Three Row Slewing Bearing 1376*1092*123mm | Support Type:Round Flange; Series Type:Light Series; Bearing - Housing - Seal:LSM50BXH; Cr - Dynamic Load Rating:18659 lbf; Cor - Static Load Rating:19558 lbf; Dimension L:4.1 in; Seal Type:Felt Seal; Bolt Size:4 x M12; Dimension R:7.1 in; Note:This product line wa; |
| RKS.425062621001 Crossed Roller Slewing Bearings(1475*1080*110mm) With External Gear Teeth For Textile Machine | Dimension H1:4.0 in; Pillow/Plummer Block Style:Split Cylindrical Ho; Bearing Type:Split Cylindrical Re; Seal Type:Aluminium Triple Lab; Ca - Axial Load Rating:78009 lbf; Dimension H2:52.8 in; Support Type:Eight-Bolt Plummer B; Dimension J1:50.0 in; Maximum Speed:310 rpm; Dimension M:16.0 in; |
| I.1016.20.00.B Internal Gear Flange Slewing Bearing(1016*840*56mm) For Excavator And Loader | J:203 mm; H:76,2 mm; Bolt (G):M20; A:83 mm; H1:28 mm; Brand:KOYO; Weight:7,8 Kg; N1:40 mm; Width (mm):76,2; d:60,325 mm; |
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
07 0946 05 Slewing Ring Bearing Video