| No. | Brand | b | B | e | f | m | s | Q | X |
| 320" | - | - | - | - | - | 5 mm | - | - | - |
| DL360 | - | - | 170 mm | - | - | - | - | - | - |
| 12mm | - | - | 20 mm | - | - | - | - | - | - |
| 46% | - | - | - | - | - | - | - | - | - |
| PC300-3 | - | - | - | - | - | - | - | - | - |
| TS250 | - | - | - | - | - | - | - | - | - |
| E70B | - | - | - | - | - | - | - | - | - |
| VDR.0171344693/694 | - | - | - | 0.3 | - | - | - | - | - |
| 4-Burner | - | - | - | - | - | - | - | - | - |
| 6202 | - | - | 35 mm | - | - | - | - | - | - |
| 7019CD/DBAVQ593F1 | - | - | - | - | - | - | - | - | - |
| 2-25mm | - | - | - | - | - | - | - | - | - |
| 750 | - | - | - | - | - | - | - | - | - |
| 52204 | NSK | - | - | - | - | - | - | - | - |
| 45290 | koyo | - | - | - | - | - | - | - | - |
| 320C | - | - | 74 mm | - | - | - | - | - | - |
| 9mm/12mm/15mm/16mm/18mm | - | - | 105 mm | - | - | - | - | - | - |
| ZL12F | - | - | - | - | - | - | - | - | - |
| 10 | - | - | - | - | - | - | - | - | - |
| 12mm | - | - | 63,5 mm | - | - | - | - | - | - |
| 36.5 | Parker | - | - | - | - | - | - | - | - |
| 30205 | SKF | - | - | - | - | - | - | - | - |
| DSB283118 | Link-Belt | - | - | - | - | - | - | - | - |
| 99.5%Min | - | - | - | - | - | - | - | - | - |
| RB10016 XRB10016 Cross Roller Bearing Size 100x140x16 Mm RB 10016 XRB 10016 | Radial Clearance:0.220 to 0.340 mm; da (min):402 mm; Groove Width A:32 mm; Da (max):598 mm; Axial Load Factor Y1:2.13; Dynamic Load Rating:5,400,000 N; Enclosure:Open; Constant e:0.32; Static Load Rating:7,400,000 N; Retainer Material:Machined Brass; |
| 12-250955/1-03220 Slewing Bearing With Internal Gear 810/1055/80mm | Compatibility:FIAT / IVECO / RENAU; Width (mm):26,000; Outer Diameter (mm):75,000; Size (mm):40x75x26; Brand:SKF; Bearing number:VKHB 2190; Bore Diameter (mm):40,000; Weight (kg):0.51; Designation CRAFT:CRF-33108 A; Designation ISO:3007708A; |
| Supply XIU15/644 Cross Roller Bearing 546*714*56mm | Outer Diameter (mm):26; Width (mm):12; Bore Diameter (mm):10; Basic static load rating (C0):185 kN; d:10 mm; D:26 mm; Size (mm):10x26x12; C:12 mm; Bearing number:63000-2RS; B:12 mm; |
| L- Shaped Bearing RKS.21 0941 | Dimension T:11.0 in; Dimension R:1.1 in; Maximum Speed:4350 rpm; Support Type:Take-Up; Cor - Static Load Rating:28551 lbf; Dimension A:5.7 in; Dimension B:5.0 in; Seal Type:Viton Single Lip; Ca - Axial Load Rating:1394 lbf; Dimension H:1.3 in; |
| 9E-1Z50-1790-0232 Crossed Roller Slewing Rings 1615/2027/150mm | Angle:11 °; L3:25 mm; D2:25 mm; l1 min.:22 mm; l2 max.:23,5 mm; L:103 mm; Basic dynamic load rating (C):8,7 kN; D1:20 mm; S2:22 mm; Brand:ISB; |
| RB19025 XRB19025 Cross Roller Bearing Size 190x240x25 Mm RB 19025 XRB 19025 | Weight:0,53 Kg; Size (mm):40x80x24.75; Width (mm):24,75; Brand:FBJ; D:80 mm; R:1,5 mm; r:1,5 mm; Outer Diameter (mm):80; T:24,75 mm; B:23 mm; |
| RKS.162.16.1204 Crossed Roller Slewing Bearings(1289*1072*68mm) With Internal Gear For Industrial Robot | Width (mm):218; Bore Diameter (mm):320; d:320 mm; Bearing number:24164W33; Outer Diameter (mm):540; Brand:ISO; C:218 mm; D:540 mm; Size (mm):320x540x218; B:218 mm; |
| 3R13-122N1B Internal Gear Heavy Duty Slewing Ring(131.25*109.6*9inch) For Climbing Cranes And Tower Cranes | Characteristic inner ring frequency, BPFI:5.89 Hz; Width (mm):12,000; da min:29 mm; D1:42.8 mm; rs min:0.6 mm; Characteristic cage frequency, FTF:0.41 Hz; Size (mm):25x47x12; Min operating temperature, Tmin:-40 °C; Nlim:9,100 rpm; Characteristic rolling element frequency, BSF:5.44 Hz; |
| 60 mm x 130 mm x 31 mm 9O-1Z30-0823-15-1 Crossed Roller Slewing Rings 715/935/100mm | r2 min.:0,6 mm; Basic dynamic load rating (C):14 kN; Weight:0,1 Kg; Bore Diameter (mm):17; a:20 mm; Width (mm):17,5; Limiting speed:12000 r/min; Size (mm):60 mm x 130 mm x 31 mm ; Bearing number:3203-B-2RSR-TV; C:17,5 mm; |
| 07 0770 00 Slewing Ring Bearing | C:18 mm; Outer Diameter (mm):91; Basic static load rating (C0):24,5 kN; E:91 mm; Basic dynamic load rating (C):23,6 kN; Bearing number:N1013RXHZTP; Brand:NSK; B:18 mm; Width (mm):18; Weight:0,437 Kg; |
| 3R8-98N9 Internal Gear Heavy Duty Slewing Ring(105.12*88.267*5.79inch) For Climbing Cranes And Tower Cranes | Calculation factor kr:0.02; Bore Diameter (mm):30; ra max.:0.3 mm; Basic dynamic load rating - C:4.6 kN; D2 ≈:27.7 mm; da - min.:19 mm; ra - max.:0.3 mm; Mass bearing:0.018 kg; Calculation factor - f0:14.7; Bearing number:61903-2RZ; |
| 9129521 1274mmx1650mmx130mm Hitachi Zx450lc Excavator Slewing Rings | Permissible sliding velocity v min.:0 m/s; Manufacturer Name:SKF; Minimum Buy Quantity:N/A; M:3 mm; Coefficient of friction µ min.:0.02; Width (mm):15; Specific dynamic load factor K:120 N/mm²; Product Group:B04264; Basic static load rating - radial direction C0:56 kN; Weight:0,0043 Kg; |
| Slewing Bearing XSU140414 344*484*56mm | Basic static load rating (C0):6,6 kN; B:14 mm; Outer Diameter (mm):47; Basic dynamic load rating (C):13,65 kN; Weight:0.132 Kg; Width (mm):14; D:47 mm; Bore Diameter (mm):15; Bearing number:AT303/15DD; r:1 mm; |
| SH120A1 Excavator SUMITOMO Three Row Slewing Bearing 1171*973*88mm | Bearing number:HK1814; Width (mm):14; C:14 mm; D:24 mm; Size (mm):18x24x14; Outer Diameter (mm):24; Fw:18 mm; Brand:ISO; Bore Diameter (mm):18; |
| R8-30E3 Outer Gear Cross Roller Slewing Bearings(35.15*26.06*2.874inch) For Lift Truck Rotators | D1 - Flange Outer Diameter:8.0898 in; C1 - Cup Flange Width:0.2187 in; D:7.875 in; Design Units:Imperial; K - Factor2:1.74; C - Cup Width:1.3437 in; Cup Part Number:48620-B; e - ISO Factor3:0.34; r - Cup Backface To Clear Radius1:0.130 in; Y - ISO Factor4:1.78; |
| L6-29N9Z Slewing Rings(33.39*25.6*2.2inch) With Internal Gears For Excavators And Ladle Turrets | Bearing number:16015ZZ; Size (mm):75x115x13; C:13 mm; Brand:FBJ; Width (mm):13; d:75 mm; B:13 mm; Outer Diameter (mm):115; D:115 mm; Weight:0,46 Kg; |
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
XR678052 Crossed Roller Bearing Video