| No. | Brand | b | B | e | f | m | s | Q | X |
| DH130-7 | - | - | - | - | - | - | - | - | - |
| 1986-2011 | - | - | - | - | - | - | - | - | - |
| J-45548 | - | - | 30 mm | - | - | - | - | - | - |
| 21% | - | - | - | - | - | - | - | - | - |
| 1991-1995 | koyo | - | - | - | - | - | - | - | - |
| 1965-1968 | Timken | - | - | - | - | - | - | - | - |
| 61812-2RS1 | SKF | - | - | - | - | - | - | - | - |
| +021 | - | - | - | - | - | - | - | - | - |
| 23000/oscillating | - | - | - | - | - | - | - | - | - |
| 30 | - | - | - | - | - | - | - | - | - |
| 2016 | - | - | 8 mm | - | - | - | - | - | - |
| 15mm | INA | - | 15,5 mm | - | - | - | - | - | - |
| 3000B/H | - | - | 535 mm | - | - | - | - | - | - |
| 12Mm | - | - | 21 mm | - | - | - | - | - | - |
| 1220*2440mm) | - | - | - | - | - | - | - | - | - |
| 62AX188, | Timken | - | 36 mm | - | - | - | - | - | - |
| 1000FE | - | - | - | - | - | - | - | - | - |
| RD400E/F | NTN | - | - | - | - | - | - | - | - |
| 1975-1991 | Nachi | - | - | - | - | - | - | - | - |
| 6D95 | Komatsu | - | 365 mm | - | - | - | - | - | - |
| 12/15/18mm | - | - | - | - | - | - | - | - | - |
| 7410BM | SKF | - | - | - | - | - | - | - | - |
| CAS:12125-02-9 | - | - | 8,5 mm | - | - | - | - | - | - |
| AT10115-1HB Slewing Bearing With Outer Gear 506x732x76 | r1,2 min.:1 mm; ra - max.:1 mm; Basic dynamic load rating - C:21.2 kN; Calculation factor kr:0.025; Da - max.:mm; Bore Diameter (mm):105; Fatigue load limit - Pu:0.965 kN; d:75 mm; D2:98.46 mm; ra max.:1 mm; |
| RKS.062.20.0644 Slewing Bearing | Engineering Group:Mounted Bearing; Dimension C:2.95 in; Oil Lubrication - T Seal:3800 rpm; Grease Lubrication - M/N Seal:2200 rpm; Shaft Tolerance:0.0030 in; Weight:13 lb; Bearing Number:22211; Adapter Sleeve Axial Movement Min:0.018 in; Full Timken Part Number:DVP11K200SB; Int Radial Clearance Reduction Min:0.0012 in; |
| 9E-1Z25-0984-0452 Crossed Roller Slewing Rings 890/1080/82mm | Width (mm):33,300; Mass:0.88 kg; rNs min:0.6 mm; da max:68.7 mm; Characteristic inner ring frequency, BPFI:5.79 Hz; ra max:1.5 mm; Fatigue limit load, Cu:2.95 kN; D1:88.9 mm; d:55,000 mm; Ca min:5.43 mm; |
| 30 mm x 72 mm x 27 mm MTO-170 No Gear Slewing Ring Bearings (12.205*6.693*1.811inch) For Work Positioners | r min.:0,3 mm; Width (mm):25; Weight:0,115 Kg; d:20 mm; D:37 mm; Da max.:35 mm; Size (mm):30 mm x 72 mm x 27 mm ; C:23 mm; Bearing number:NATB 5904; Static load rating axial (C0):6,11 kN; |
| 01-1712-00 External Gear Slewing Ring Bearing(1929*1565*110mm)for Construction Machinery | Size (mm):25x32x32; Outer Diameter (mm):32; Basic static load rating (C0):49,5 kN; Weight:0,119 Kg; Fw:25 mm; Bearing number:RNAO-25×37×32ZW; Bore Diameter (mm):25; D:37 mm; ra max.:0,3 mm; Basic dynamic load rating (C):33,5 kN; |
| E.950.20.00.C External Gear Flange Slewing Ring Bearing(950.4*734*56mm) For Wind And Solar Energy | Width (mm):142,875; T:142,875 mm; Bore Diameter (mm):120,65; d:120,65 mm; C:114,3 mm; Size (mm):120.65x234.95x142.87; D:234,95 mm; Bearing number:95475/95927CD+X2S-95; r:1,5 mm; Outer Diameter (mm):234,95; |
| A10-47E1 External Gear Slewing Rings(54.3*42*4.63inch) For Tunnel Boring Machines | G2 - Heat Generation Factor (Rib-Roller End):26.7; G1 - Heat Generation Factor (Roller-Raceway):125.3; Series:30315M; C - Cup Width:31.000 mm; D:160.000 mm; e - ISO Factor3:0.35; Da - Cup Frontface Backing Diameter:150.10 mm; K - Factor2:1.69; Db - Cup Backface Backing Diameter:145.03 mm; Design Units:METRIC; |
| 16317001 External Gear Slewing Ring Bearings (218.268*197.244*5.512inch) For Log Loaders And Feller Bunchers | da:78 mm; J:65 mm; Size (mm):52x78x2; Outer Diameter (mm):78; Brand:INA; d:52 mm; Bore Diameter (mm):52; t:1,5 mm; D:78 mm; Width (mm):2; |
| 9E-1Z30-1473-78 Crossed Roller Slewing Bearing With External Gear 1362/1590/111mm | B:64 mm; Outer Diameter (mm):190; C:53 mm; a:44 mm; Bearing number:32318 A; Basic static load rating (C0):610 kN; Basic dynamic load rating (C):457 kN; Width (mm):67,5; Size (mm):90x190x67.5; Weight:8,4 Kg; |
| 2628DBD101t Four-point Contact Ball Slewing Bearing With Innter Gear | C - Cup Width:1.7500 in; C1 - Cup Flange Width:0.3750 in; Y - ISO Factor4:1.43; D:9.0000 in; K - Factor2:1.39; Cg - Geometry Factor5:0.135; D1 - Flange Outer Diameter:9.3710 in; Da - Cup Frontface Backing Diameter:8.54 in; r - Cup Backface To Clear Radius1:0.130 in; Series:895; |
| RE3010UUC0 High Precision Cross Roller Ring Bearing | Other Features:Allowable Misalignme; Oil lub.:10000; Basic dynamic load rating (C):15.8 kN; da(min):41.5; Bearing number:1207; Size (mm):35x72x17; Harmonized Tariff Code:8482.10.50.68; Cr:15.8; Product Group:B00152; Number of Rows of Balls:Double Row; |
| SD.1400.32.00.C Flange Light Type Slewing Ring Gear(1400*1105*90mm) For Truck Trailer | C:30 mm; D:100 mm; Basic dynamic load rating (C):53 kN; e:2 mm; H1:9 mm; J2:20,6 mm; B1:42,9 mm; Brand:SNR; Bore Diameter (mm):42,8625; D2:70 mm; |
| 10-250855/0-03010 Four-point Contact Ball Slewing Bearing 755mmx955mmx63mm | Bearing - Housing - Seal:LSE511BRH; Cor - Static Load Rating:149273 lbf; Dimension V:0.1 in; Bolt Size:4 x M24; Series Type:Light Series; Bearing UPC:013992027344; Support Type:Round Flange; Note:This product line wa; Maximum Speed:1450 rpm; Dimension T:18.5 in; |
| RE12025UUC0 High Precision Cross Roller Ring Bearing | D:120 mm; Basic static load rating (C0):244,2 kN; Bearing number:RNA 4917; C:35 mm; Width (mm):35; Da max.:113,5 mm; Outer Diameter (mm):120; Weight:0,705 Kg; Basic dynamic load rating (C):109,8 kN; Size (mm):100x120x35; |
| 9E-1Z40-1250-0263 Crossed Roller Slewing Rings 1084/1476/110mm | Bore Diameter (mm):90; B:45 mm; Weight:3,22 Kg; R:2,5 mm; D:150 mm; Brand:FBJ; Basic dynamic load rating (C):265 kN; T:45 mm; Bearing number:33118; Outer Diameter (mm):150; |
| 40 mm x 90 mm x 23 mm 92-321155/1-06235 Slewing Bearing With Internal Gear 1012/1300/90mm | Calculation factor Y1:0.55; Basic static load rating C0:224 kN; D:240 mm; Outside Diameter:9.449 Inch | 240 Mil; r1,2 min.:3 mm; UNSPSC:31171531; Flush Ground:No; Db - max.:233 mm; Calculation factor e:1.14; Mass bearing:10 kg; Size (mm):40 mm x 90 mm x 23 mm ; |
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
124.25.710 Slewing Bearing 608x812x75mm Video