| No. | Brand | b | B | e | f | m | s | Q | X |
| [20pcs] | - | - | - | - | - | - | - | - | - |
| Srx715 | - | - | - | - | - | - | - | - | - |
| 1100 | - | - | - | - | - | - | - | - | - |
| 020.40.1600 | - | - | 28 mm | - | - | - | - | - | - |
| 7-3-3 | - | - | - | - | - | - | 12 mm | - | - |
| 18mm | - | - | 165 mm | - | - | - | - | - | - |
| 15mm | - | - | - | - | - | - | - | - | - |
| 2x | TRW | - | - | - | - | - | - | - | - |
| ZX636 | - | - | - | - | - | - | - | - | - |
| 2x | TRW | - | - | - | - | - | - | - | - |
| 8mm | - | - | - | - | - | - | - | - | - |
| 6301 | NSK | - | 41,275 mm | - | - | - | - | - | - |
| 34CrMo4QT | - | - | - | - | - | - | - | - | - |
| HSR-30 | thk | - | - | - | - | - | - | - | - |
| 1pcs | - | - | - | - | - | - | - | - | - |
| #NK55/35, | INA | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | - | - |
| 1X-3X | - | - | - | - | - | - | - | - | - |
| PC200-1/2 | - | - | - | - | - | - | - | - | - |
| 30x40x30 | - | - | 37 mm | - | - | - | - | - | - |
| BM1/BM2/OMR/BMR | - | - | 24.000 mm | - | - | - | - | - | - |
| 4-Burner | - | - | - | - | - | - | - | - | - |
| Wa380-3 | - | - | - | - | - | - | - | - | - |
| 865 | - | - | - | - | - | - | - | - | - |
| 1* | - | - | 36,678 mm | - | - | - | - | - | - |
| RKS.21.0541 L-shape Range External Gear Slewing Ring Bearing(640*434*56mm) For Handling Manipulator | Width (mm):61,5; Size (mm):120x215x61.5; Weight:9,26 Kg; C:50 mm; (Grease) Lubrication Speed:1500 r/min; D:215 mm; T:61,5 mm; Outer Diameter (mm):215; Bearing number:32224; Basic static load rating (C0):758 kN; |
| L9-42N9Z Slewing Bearing(47.24*36.16*3.54inch) With Internal Gears For Industrial Turntables | Db - Cup Backface Backing Diameter:261.87 mm; Aa - Cage-Cone Backface Clearance:20.1 mm; B:88.900 mm; Ab - Cage-Cone Frontface Clearance:9.9 mm; C - Cup Width:57.150 mm; Cg - Geometry Factor:0.133; Da - Cup Frontface Backing Diameter:288.50 mm; Series:HH932100; e - ISO Factor8:0.73; C0 - Static Radial Rating:282000 lbf; |
| 9E-1Z14-0414-0635 Crossed Roller Slewing Bearing With External Gear 344/503.3/56mm | Width (mm):47,625; R:3,3 mm; Basic dynamic load rating (Ca90):540000; D:889 mm; Outer Diameter (mm):889; r:3,3 mm; Brand:Timken; Basic static load rating (C0):11400000 kN; T:47,625 mm; Weight:45,6 Kg; |
| XRA8008 Cross Roller Bearing Size 80x96x8mm | D:37 mm; Da max.:35 mm; C:17 mm; Basic dynamic load rating (C):17,9 kN; Brand:JNS; Bore Diameter (mm):25; Size (mm):25x37x17; Weight:0,055 Kg; Basic static load rating (C0):20,5 kN; Width (mm):17; |
| 16369001 External Gear Slewing Ring Bearings (97.795*76.85*7.126inch) For Heavy Mill Equipment | Dimension M:70 mm; Bearing Type:Split Cylindrical Re; Note:This product line wa; Maximum Speed:3940 rpm; Housing Width:4.0 in; Cr - Dynamic Load Rating:23155 lbf; Dimension L:275 mm; Dimension H2:180 mm; Dimension J:234 mm; Bearing UPC:013992025777; |
| 213DBS161y Slewing Bearing With Internal Gear Teeth 213x330x35mm | Brand:NBS; Weight:1,03 Kg; L:100 mm; Bearing number:KB50100-PP; W:2,65 mm; Bore Diameter (mm):50; Basic dynamic load rating (C):3,9 kN; Outer Diameter (mm):75; L1:77,6 mm; D:75 mm; |
| China XSI 201455N Cross Roller Bearing 1310*1555*80mm | D:72 mm; C1:5,5 mm; Outer Diameter (mm):72; d:30 mm; Width (mm):42,9; Size (mm):30x72x42.9; Minimum Buy Quantity:N/A; Bore Diameter (mm):30; S:17,5 mm; Static load rating radial (C0):15,4 kN; |
| Crossed Roller Slewing Bearing RKS.160.16.1644 | Brand:SIGMA; d:85 mm; B:52 mm; Bore Diameter (mm):85; D:210 mm; C:52 mm; Bearing number:10417 M; Size (mm):85x210x52; Width (mm):52; Outer Diameter (mm):210; |
| I.1100.22.00.A-T Internal Gear Slewing Ring Bearing(1095*924*82mm) For Excavator And Crane | L2:13 mm; N1:16 mm; Bore Diameter (mm):34,925; Basic static load rating (C0):15,4 kN; Bearing number:UCT207-22E; H2:64 mm; Weight:1,6 Kg; L1:78 mm; N:22 mm; N2:37 mm; |
| 55 mm x 140 mm x 33 mm 16310001 External Gear Slewing Ring Bearings (61.3*47.125*5.875inch) For Log Loaders And Feller Bunchers | Y1:1,98; Y2:2,94; D1:181,2 mm; nG:2800 1/min / Limitin; d:130 mm; a:10 mm; Da max:199 mm; Cr:710000 N; ds:3,2 mm; d2:148,3 mm; Size (mm):55 mm x 140 mm x 33 mm ; |
| A16-53E1A External Gear Slewing Rings(61.3*47.12*5.88inch) For Tunnel Boring Machines | Brand:FAG; Db min:96 mm; Bore Diameter (mm):60; Bearing number:33112; B:30 mm; nG:6900 1/min / Limitin; Da max:93 mm; rb max:1,5 mm; C0r:171000 N / Static lo; db min:67 mm; |
| 124.25.710 Slewing Bearing 608x812x75mm | Bearing - Housing - Seal UPC:013992073655; Bearing - Housing - Seal:MSE200BXHHTPS; Weight:30 lb; Bearing Number:MSE200BX; Seal Type:High Temperature Pac; Cr - Dynamic Load Rating:27202 lbf; Maximum Speed:4350 rpm; Dimension H2:7.1 in; Dimension M:2.8 in; Bolt Size:2 x M16; |
| 2.75 Inch | 69.85 Millimeter x 0 Inch | 0 Millimeter x 1.188 Inch | 30.175 Millimeter 03 0181 07 Slewing Ring Bearing | d:340 mm; ra(max):2; S(mm):6; do:6; Bearing No.:DC4868VW; da min.:352 mm; Da max.:408 mm; (Refer.)Mass(Fixed side)(kg):24.8; Bore Diameter (mm):340; r(min):2.1; Size (mm):2.75 Inch | 69.85 Millimeter x 0 Inch | 0 Millimeter x 1.188 Inch | 30.175 Millimeter ; |
| YRT80-C / YRT80C Rotary Table Bearing 80x146x35mm | Basic dynamic load rating (C):57 kN; Outer Diameter (mm):120; d:65 mm; Bore Diameter (mm):65; r1 min.:1,5 mm; Weight:0,982 Kg; B:23 mm; C:23 mm; Basic static load rating (C0):40 kN; Bearing number:6213-Z; |
| L9-57E9Z Slewing Ring Bearing(62.64*51.38*3.54inch) With External Gears For Aerial Lifts | Bore Diameter (mm):40; Bearing number:K40x45x17; B:17 mm; Outer Diameter (mm):45; Width (mm):17; Brand:ISO; Ew:45 mm; Fw:40 mm; Size (mm):40x45x17; |
| RB4010 XRB4010 Cross Roller Bearing Size 40x65x10 Mm XRB 4010 RB 4010 | Basic static load rating (C0):415 kN; (Grease) Lubrication Speed:900 r/min; Brand:CX; d:90 mm; H:22 mm; Weight:0,64 Kg; Basic dynamic load rating (C):104 kN; D1:120 mm; D:120 mm; Outer Diameter (mm):120; |
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
131.45.2240 Slewing Bearing 2019x2461x231mm Video