| No. | Brand | A | h | b | U | S | N | K | w |
| 21%N | - | - | - | - | - | - | - | - | - |
| ZX10R | NTN | - | - | - | - | - | - | - | - |
| 5] | - | - | - | - | - | - | - | - | - |
| A6 | SKF | - | - | - | - | - | - | - | - |
| 15mm | - | - | - | - | - | - | - | - | - |
| (2 | - | - | - | - | - | - | - | - | - |
| Kp006 | Asahi | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | - | - |
| 2236 | NSK | - | - | - | - | - | - | - | - |
| Ec210lrc | - | - | - | - | - | - | - | - | - |
| 606RS | - | - | - | - | - | - | - | - | - |
| 2.7MM | - | - | - | - | - | - | - | - | - |
| PC40MR-2 | - | - | - | - | - | - | - | - | - |
| ZARF2068-TV-A | INA | - | - | - | - | - | - | - | - |
| 5X10X4(X2) | - | - | - | - | - | - | - | - | - |
| 140LPM | - | - | - | - | - | - | - | - | - |
| PJQ219 | TRW | - | - | - | - | - | - | - | - |
| GR300 | - | - | - | - | - | - | - | - | - |
| 20x10 | - | - | - | - | - | - | - | - | - |
| 21% | - | - | - | - | - | - | - | - | - |
| 23218J | koyo | - | 8 mm | 18 mm | - | - | - | - | - |
| 901175101001) | - | - | - | - | - | - | - | - | - |
| SUCFL207-22N | NTN | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 1500 | NTN | - | - | - | - | - | - | - | - |
| 6206C3 | NSK | - | - | - | - | - | - | - | - |
| K05013AR0 Bearing 50mmx76mmx13mm | lock nut number:AN17; series:ASK; manufacturer upc number:7316576660658; thread size:4.122-12; compatible shaft diameter:3.7402 in; lock washer number:W17; taper:1:12; overall length:3.3460 in; |
| CRBC3010 Thin-section Crossed Roller Bearing | series:KP-BS; inner ring width:11.1 mm; fillet radius:0.61 mm; application:Airframe Control; standards met:SAE-AS7949; finish/coating:Cadmium Plated; maximum misalignment:5 °; outer ring width:9.53 mm; precision rating:Not Rated; B:0.4370 in; |
| KG050AR0 Reali-slim Bearing In Stock, 5.000X7.000X1.000 Inches | Availability:In Stock; Static Load Rating (kN):3.25; Seals or Shields:Low Friction Seals; B:10mm; Limiting Speed Rating (r/min):22000; d:17mm; Weight:0.02 KGS; Condition:New; Cage Type:Steel; Dynamic Load Rating (kN):6.37; |
| RE11012 Thin-section Crossed Roller Bearing 110x135x12mm | h1:210 mm; N max.:181 mm; C1 max.:65.5 mm; l4 max.:324.5 mm; G:M 100x2; Material constant KM:330; Specific dynamic load factor K:100 N/mm²; d:90 mm; B:60 mm; Basic dynamic load rating C:490 kN; |
| RU85UUCCOP5 Customized RU Cross Roller Bearing For Harmonic Drive Reducer | SKU:23028ejw33w89c4-timk; D:210mm; Cage Type:Steel; Clearance:C4; Availability:In Stock; Static Load Rating (kN):802; Dynamic Load Rating (kN):551; B:53mm; Seals or Shields:Open Type; Limiting Speed Rating (r/min):2300; |
| KB055AR0 Reali-slim Bearing 5.500x6.125x0.3125 Inch | series:01E; overall depth:5-13/16 in; radial dynamic load capacity:52600 lb; expansion type:Non-Expansion Bearin; maximum rpm:2790 RPM; d:3-3/16 in; bearing type:Split Cylindrical Ro; housing construction:Split Flange Mount; duty type:Medium Duty; bolt circle diameter:10-3/4 in; |
| KB025AR0/KB025CP0/KB025XP0 Reail-silm Thin-section Bearings (2.5x3.125x0.3125 Inch) | Dynamic Load Rating (kN):83200; Availability:In Stock; D:120mm; Seals or Shields:Open Type; SKU:3213btn-nsk; Static Load Rating (kN):72900; Cage Type:Plastic; Clearance:Standard; d:65mm; B:38.1mm; |
| 39330001 Bearing 120x180x25mm | locking device:Set Screw Collar; snap ring included:Without Snap Ring; bore type:Round; d:30 mm; B:1-1/2 in; finish/coating:Uncoated; maximum rpm:3800 RPM; cage material:Nylon; D:2.4409 in; outer ring width:18 mm; |
| RE25030UUCC0P4/RE25030UUC1P4 Thin-section Inner Ring Division Crossed Roller Bearing | misalignment angle:7.5 °; outer ring width:.7970 in; bearing type:Radial; outer ring material:4130 or 4340 Alloy S; lubrication type:Requires Lubrication; inner ring width:1 in; D:1.7500 in; d:1.0000 in; closure type:Open; |
| RU85 Thin-section Crossed Roller Bearing | bore type:Round; housing material:Cast Steel; manufacturer upc number:662864308397; bearing type:Spherical Roller; d:4.4375 in; seal type:Clearance/Non-C; mounting:Four-Bolt Base; locking device:Set Screw; |
| KD090CP0 Bearing 9.0x10.0x0.5 Inch | compatible washers:LS5070, GS81110, WS8; D:70 mm; fillet radius:0.6 mm; maximum rpm:4800 RPM; d:50 mm; operating temperature range:-20 to +120 &de; thrust bearing type:Roller & Cage As; series:811; B:14 mm; cage material:Plastic; |
| KB040X Thin Section Bearing Supplier | D:4.0360 in; width:0.6250 in; pressure tolerance:Ambient; Weight:1.573 lbs; shaft diameter:3.0380 in; misalignment tolerance:0.020 in; construction description:Guardian® Flange; continuous temperature range:-22 to 400°F; typical application:Exceptional Bearing; harmonization code:8487900040.US; |
| CRBB 20030 Crossed Roller Bearing 200mmx280mmx30mm | bolt size:0.3750 in; locking device:Eccentric Collar; mounting type:Two-Bolt Flange; D:3.0000 in; manufacturer catalog:Click here; d:0.9375 in; overall height:1.8000 in; housing material:Cast Iron; B:3.8750 in; bore type:Round; |
| KA045CP0 Reali-slim Bearing In Stock, 4.500X5.000X0.250 Inches | mounting type:Four-Bolt Flange; standards met:ANSI/ABMA STD 9; finish/coating:Powder Coated; locking device:Set Screw; lubrication type:Lubrication Fitting; length through bore:1-5/16 in; seal type:Contact Seal; d:0.9375 in; series:200; radial dynamic load capacity:2430 lbf; |
| KB200CP0 Bearings 20.0X20.625X0.3125inch | maximum pv value:75000; groove/plug type:None; D:1-1/16 in; overall length:2 in; operating temperature range:Maximum of +800; sleeve bearing type:Plain Sleeve; bearing material:Leaded-Tin Bronze; standards met:ASTM B584-78; d:13/16 in; maximum p value:3000 psi; |
| KB120AR0 Thin Section Bearing | replacement bearing:GY1108KRRB; d:1.5000 in; bore type:Round; radial static load capacity:4400 lb; standards met:FDA Compliant, USDA; housing material:Cast Iron; expansion type:Non-Expansion Bearin; finish/coating:Uncoated; D:5.6563 in; lubrication type:Lubrication Fitting; |
Thin Section Ball Bearings | Alpine Bearing
Request a quote for Thin Section ball bearings from Alpine Bearing here. Same-day shipping available on in-stock items
HGT Thin Section Bearing
Items 1 - 10 of 31 - The HGT Thin Section Bearings produce contains seven series of open types and five series of sealed types, with bore diameter ranging from 1
Thin Section Ball Bearings - Metric Thin Section Bearings
Thin Section Ball Bearings were developed for applications where space limitations are of the utmost importance. As the name implies, the difference between the
Thin Section Ball Bearing | The Timken Company
Timken® thin section bearing line offers high accuracy and low profile design in standard stainless steel or chrome steel. Shop our full line including deep
Thin section ball bearings, metric bearings, roller bearings
The Kaydon Reali-Slim® inch-standard bearing is one of the most widely used thin section bearings in the world. Kaydon thin bearing solutions save weight,
Thin Section Ball Bearings - RBC Bearings
Use RBC's selection guide to help you determine which of RBC's Thin Section Ball Bearings are best suited for your design application
Thin Section Bearings Online
518 results - Thin Section Bearings Online Online shopping by VXB bearings the online bearing store and supplier, wholesale prices and same day shipping, next
Slim Section Bearings | Thin Section Bearings | Custom
Slim Section Bearings, Inc. is the manufacturing division of Ritbearing Corp., with experience in manufacturing that began in 1987. We are able to give our
What is a Thin Section Bearing and How Does it Reduce Cost?
Thin section bearings are a family of bearings designed from a limited number of widths and thicknesses (cross sections), with each cross section manufactured
N Series Thin-Section Ball Bearings Metric and Inch Designs
Extremely thin-section ball bearings and roller bearings contributing to downsizing, weight saving, and reduction of torque loss of robots, construction equipments,
KD075CP0 Reali-slim Bearing In Stock, 7.500X8.500X0.500 Inches Video