| No. | Brand | A | h | b | U | S | N | K | w |
| 10mm | - | - | - | - | - | - | - | - | - |
| (NE15, | - | - | - | - | - | - | - | - | - |
| 250V | - | - | - | - | - | - | - | - | - |
| J-919 | - | - | - | - | - | - | - | - | - |
| 9 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 3074 | - | - | - | - | - | - | - | - | - |
| 50 | NTN | - | - | - | - | - | - | - | - |
| 5000C | - | - | - | - | - | - | - | - | - |
| N309 | - | - | - | - | - | - | - | - | - |
| NJ308ECP | - | - | - | - | - | - | - | - | - |
| A6ve28Hz1 | - | - | - | - | - | - | - | - | - |
| 130x280X93 | - | - | - | - | - | - | - | - | - |
| 634 | - | - | - | - | - | - | - | - | - |
| 5-200rpm | - | - | - | - | - | - | - | - | - |
| 380v | - | - | - | - | - | - | - | - | - |
| 23pcs | - | - | - | - | - | - | - | - | - |
| 6 | - | - | - | - | - | - | - | - | - |
| EX400 | INA | - | - | - | - | - | - | - | - |
| R12LLU | NTN | - | - | - | - | - | - | - | - |
| 1500 | NTN | - | - | - | - | - | - | - | - |
| ms18 | - | - | - | - | - | - | - | - | - |
| CB14-2 | FAFNIR | - | - | - | - | - | - | - | - |
| 3-Ply | - | - | - | - | - | - | - | - | - |
| Ex60-1 | Hitachi | - | - | - | - | - | - | - | - |
| MPA-07-220 | Parker | - | - | - | - | - | - | - | - |
| 812 | - | - | - | - | - | - | - | - | - |
| KB035ARO Thin Section Bearing | rod end type:Male Threaded; ball material:52100 Alloy Steel; d:12 mm; axial static load capacity:11300 lbf; operating temperature range:Max 250°; shank thread length:1.7500 in; shank thread size:M12 x 1.75 mm; head width:.6875 in; thread direction:Right Hand; lubrication type:Relubricatable; |
| 0 Inch | 0 Millimeter x 4.331 Inch | 110.007 Millimeter x 0.741 Inch | 18.821 Millimeter KB200XP0 Bearing | bearing material:Cast Iron; D:5.1250 in; inner ring width:101.6 mm; d:65 mm; static load capacity:71500 lbf; dynamic load capacity:51100 lbf; fillet radius:1.98 mm; B:2.1250 in; series:400; outer ring width:53.98 mm; Size (mm):0 Inch | 0 Millimeter x 4.331 Inch | 110.007 Millimeter x 0.741 Inch | 18.821 Millimeter ; |
| SA047XP0 BEARING 4.750X5.250X0.250 INCH | |
| RB30035 Thin-section Crossed Roller Bearing | D:110 mm; radial dynamic load capacity:55 kN; fillet radius:1.5 mm; outer ring width:22 mm; d:60 mm; radial static load capacity:44 kN; series:200; contact angle:15 °; finish/coating:Uncoated; B:22 mm; |
| K36008CP0 Bearing 360mmx376mmx8mm | Clearance:Standard; Seals or Shields:Open Type; Availability:In Stock; Grease Limiting Speed (r/min):850; Oil Limiting Speed (r/min):1100; Dynamic Load Rating (kN):1160; Cage Type:Brass; Static Load Rating (kN):2140; Weight:32.60 KGS; SKU:23048camke4-nsk; |
| CRBH9016A Thin-section Crossed Roller Bearing | seal type:Felt; |
| RA6008C Thin-section Crossed Roller Bearing 60x76x8mm | manufacturer catalog:Click here; operating temperature range:Max 500 ºF; sleeve bearing type:Plain Sleeve; groove/plug type:None; maximum v value:750 fp/min; Weight:2.25 lbs; d:2-1/2 in; manufacturer upc number:717905066764; bearing material:Cast Bronze C93200 &; material specification:SAE 660 (C932&#; |
| SB180CP0 BEARING 18.000*18.625*0.3125 INCH | seal type:Contact with Flinger; slot spacing:3.5000 in; series:STMH-T; locking device:Concentric Collar; maximum rpm:4500 RPM; expansion type:Non-Expansion Bearin; overall length:4-7/16 in; lubrication type:Lubrication Fitting; B:1-3/4 in; operating temperature range:-20 to +200 &de; |
| KD075AR0/KD075CP0/KD075XP0 Reail-silm Thin-section Bearings (7.5x8.5x0.5 Inch) | maximum rpm:2000 RPM; base to bore centerline:3.2500 in; D:8-5/8 to 9-5&#x; seal type:Contact/Lip; overall height:6.7813 in; d:2.4375 in; radial dynamic load capacity:38200 lb; mounting:Two-Bolt Base; B:4-5/32 in; lubrication type:Lubrication Fitting; |
| RE19025 Thin-section Inner Ring Division Crossed Roller Bearing | bore type:Round; d:1.7500 in; radial static load capacity:4030 lbf; expansion type:Non-Expansion Bearin; mounting type:Four-Bolt Flange; locking device:Accu-Loc; seal type:Contact with Flinger; lubrication type:Lubrication Fitting; housing material:Cast Iron; series:UEF200; |
| KB040XP0 Bearing 4.0x4.625x0.3125 Inch | groove type:Graphite-Filled Groo; overall length:0.5000 in; bushing outside diameter:0.5938 in; bushing type:Plain; inside diameter:0.5000 in; bushing material:PTFE; |
| KA050CP0 Precision Bearings5.0x5.5x0.25 Inch | mounting type:Four-Bolt Flange; expansion type:Non-Expansion Bearin; lubrication type:Lubrication Fitting; maximum rpm:2500 RPM; d:2.4375 in; duty type:Standard Duty; locking device:Eccentric Collar; D:5.6250 in; housing material:Cast Iron; seal type:Contact Seal; |
| KD065AR0/KD065CP0/KD065XP0 Reail-silm Thin-section Bearings (6.5x7.5x0.5 Inch) | |
| KAA10CLO Thin Section Bearing | operating temperature range:Maximum of +300; housing material:Cast Iron; expansion type:Expansion Bearing &#; finish/coating:Powder Coated; D:5 in; lubrication type:Lubrication Fitting; housing construction:Solid Pillow Block; base to bore centerline:1-3/8 in; base width:2 in; bearing material:Bronze; |
| CRBS20013 Thin-section Crossed Roller Bearing | radial static load capacity:1570 lb; ball width:.4370 in; lubrication:Self Lubricating; d:0.3125 in; shank thread length:1.2190 in; length to ball center:1.8750 in; series:CTMD; head width:.3440 in; lubrication type:Self Lubricating; housing material:Carbon Steel - corro; |
| KB047XP0/CSXB047 Reail-silm Thin-section Bearings 120.65X136.525X7.938mm | overall height:7-3/4 in; operating temperature range:-20 to +220 &de; flange mounting type:Four-Bolt Square; replacement bearing:RCI-300; housing material:Cast Iron; seal type:Contact/Lip; d:3 in; bearing type:Tapered Roller; locking device:Double Concentric Co; series:RFB; |
N Series Thin-Section Ball Bearings Metric and Inch Designs
Extremely thin-section ball bearings and roller bearings contributing to downsizing, weight saving, and reduction of torque loss of robots, construction equipments,
What is a Thin Section Bearing and How Does it Reduce Cost?
Thin section bearings are a family of bearings designed from a limited number of widths and thicknesses (cross sections), with each cross section manufactured
Thin section ball bearings, metric bearings, roller bearings
The Kaydon Reali-Slim® inch-standard bearing is one of the most widely used thin section bearings in the world. Kaydon thin bearing solutions save weight,
Thin Section Ball Bearings - Metric Thin Section Bearings
Thin Section Ball Bearings were developed for applications where space limitations are of the utmost importance. As the name implies, the difference between the
Thin Section Bearings Online
518 results - Thin Section Bearings Online Online shopping by VXB bearings the online bearing store and supplier, wholesale prices and same day shipping, next
Slim Section Bearings | Thin Section Bearings | Custom
Slim Section Bearings, Inc. is the manufacturing division of Ritbearing Corp., with experience in manufacturing that began in 1987. We are able to give our
Thin Section Ball Bearings - RBC Bearings
Use RBC's selection guide to help you determine which of RBC's Thin Section Ball Bearings are best suited for your design application
Thin Section Ball Bearings | Alpine Bearing
Request a quote for Thin Section ball bearings from Alpine Bearing here. Same-day shipping available on in-stock items
HGT Thin Section Bearing
Items 1 - 10 of 31 - The HGT Thin Section Bearings produce contains seven series of open types and five series of sealed types, with bore diameter ranging from 1
Thin Section Ball Bearing | The Timken Company
Timken® thin section bearing line offers high accuracy and low profile design in standard stainless steel or chrome steel. Shop our full line including deep
KB050CP0 Video