No. | Brand | A | h | b | U | S | N | K | w |
(CRBC12025) | RBC | - | - | - | - | - | - | - | - |
1/4 | - | - | - | - | - | - | - | - | - |
1981 | John Deere | - | - | - | - | - | - | - | - |
606ZZM | Hitachi | - | - | - | - | - | - | - | - |
13 | - | - | - | - | - | - | - | - | - |
62209-2RS1 | SKF | - | - | - | - | - | - | - | - |
5028 | - | - | - | - | - | - | - | - | - |
510087 | Timken | - | - | - | - | - | - | - | - |
19x10.5 | - | - | - | - | - | - | - | - | - |
0.5mm | - | - | - | - | - | - | - | - | - |
NSK2147 | NSK | - | - | - | - | - | - | - | - |
10x | - | - | - | - | - | - | - | - | - |
HD2/900/OC/LS/21/50/APC6 | Parker | - | - | - | - | - | - | - | - |
3 | - | - | - | - | - | - | - | - | - |
P2 | INA | - | - | - | - | - | - | - | - |
4-5mm | - | - | - | - | - | - | - | - | - |
9mm/12mm/15mm/16mm/18mm | - | - | - | - | - | - | - | - | - |
VP1-15-35 | - | - | - | - | - | - | - | - | - |
98.5% | - | - | - | - | - | - | - | - | - |
3D | - | - | - | - | - | - | - | - | - |
2.5mm | - | - | - | - | - | - | - | - | - |
10x | - | - | - | - | - | - | - | - | - |
KAA10AG0 Thin Section Ball Bearings (1x1.375x0.1875 Inch) | operating temperature range:Maximum of +500; backing material:Epoxy Fiberglass; maximum p value:500 psi; groove/plug type:None; overall length:1 in; d:1 in; material specification:Duralon; maximum v value:50 fp/min; bearing material:Self-Lubricating Fab; sleeve bearing type:Plain Sleeve; |
CRBH10020A Thin-section Crossed Roller Bearing 100x150x20mm | |
KB020AR0 Thin Section Bearings | cage material:Steel; radial static load capacity:7650 lb; finish/coating:Uncoated; D:80 mm; internal clearance:C0; fillet radius:1 mm; row type & fill slot:Double-Row Non-Fill; contact angle:20 °; radial dynamic load capacity:11600 lb; d:40 mm; |
KD055CP0 Reali-slim Bearing In Stock, 5.500X6.500X0.500 Inches | standards met:Mil-B-5687C; maximum pv value:10000; plug type:No Plugs; maximum v value:1200 fp/min; bearing material:Bronze; material specification:SAE 841; operating temperature range:Maximum of +250; D:1 in; inside diameter:5/8 in; nominal overall length:1/8 in; |
CSED045-2RS Thin Section Bearings | series:AOR3; |
CSXU060 Thin Section Bearings | duty type:Medium Duty; overall length:9.5000 in; expansion type:Non-Expansion Bearin; overall height:5.0938 in; mounting:Two-Bolt Base; d:50 mm; lubrication type:Lubrication Fitting; B:1.2188 in; locking device:Set Screw; housing material:Cast Iron; |
CSXB040 Thin Section Bearing Four Point Contact Bearing, Type X | bearing material:AISI 52100 Steel - K; d:0.7500 in; seal type:Contact with Slinger; replacement bearing:UE204-12MZ20; radial dynamic load capacity:2890 lbf; thread size:1/2-13UNC; locking device:Accu-Loc Collar; D:2.5625 in; radial static load capacity:1500 lbf; housing material:PBT Thermoplastic; |
KAA10CL0 Reali-slim Bearing In Stock, 1.000X1.375X0.1875 Inches | v-groove angle:90 °; finish/coating:Black Oxide; radial static load capacity:16000 lbs; stud length:2.7500 in; width to groove center:1.0000 in; radial dynamic load capacity:14300 lbs; point diameter:4.0000 in; roller material:Chrome Steel; maximum rpm:700 rpm; roller width:2.0000 in; |
RB 19025 Thin-section Crossed Roller Bearing 190x240x25mm | fillet radius:2 mm; series:300-S; B:37 mm; dynamic load capacity:25600 lbf; finish/coating:Uncoated; precision rating:ABEC 1 (ISO Cla; outer ring width:37 mm; D:160 mm; d:75 mm; closure type:Open; |
KG070CP0 Open Reali-slim Bearing In Stock, 7.000X9.000X1.000 Inches | A1:88.9 mm; End plug (suffix Y):EPR 9; H2:38.1 mm; Cap bolt:2 x 5/8-11 UNC; H1:95.25 mm; P90°:47.2 kN; P180°:32 kN; ba:35.719 mm; Housing:SAFS 217; Max. speed for Taconite seal:775 r/min; |
CSXC050-2RS Thin Section Bearings | operating temperature range:Maximum of +300; finish/coating:Uncoated; B:0.5000 in; D:1.7500 in; maximum rpm:2500 RPM; bearing material:Steel; outer ring width:12.7 mm; static load capacity:1025 lbs; series:3000; internal clearance:C0; |
XSU080318 Slewing Bearing | Clearance:Standard; Fatigue Load Rating (kN):3.75; Availability:In Stock; B:28mm; Grease Limiting Speed (r/min):7000; Weight:1.95 KGS; Dynamic Load Rating (kN):104; d:110mm; Cage Type:Plastic; Oil Limiting Speed (r/min):11000; |
KG160XP0 | radial static load capacity:4000 lbs; finish/coating:Black Oxide; head type:Hex; manufacturer catalog number:2150102000; roller width:0.8750 in; stud type:Standard; stud length:1.5000 in; radial dynamic load capacity:4840 lbs; maximum rpm:2350 rpm; series:Inch CAMROL (CF; |
SC160AR0 BEARING 16.000X16.750X0.375 INCH | lubrication type:PTFE liner; closure type:Open; inner ring width:0.6250 in; ball material:17-4PH Stainless Ste; bearing type:Radial; ball diameter:0.8750 in; outer ring material:17-4PH Stainless Ste; outer ring width:0.5050 in; manufacturer catalog:www.aurorabearing.co; race material:17-4PH Stainless Ste; |
KYB035/KRB035/KXB035 Thin Section Ball Bearing (3.5x4.125x0.3125 Inch) For Robotic | compatible bore diameter:3-3/16 to 3-1 bolt center-to-center width:2 in; overall height:11-13/16 in; height to center line:5-5/8 in; frame type:Center Pull; travel:12 in; compatible bearing series/part number:ZT2000, ZT3000; base width:5 in; D:32 in; |
CSXU-2RS Thin Section Bearings |
Thin section ball bearings, metric bearings, roller bearings
The Kaydon Reali-Slim® inch-standard bearing is one of the most widely used thin section bearings in the world. Kaydon thin bearing solutions save weight,
Thin Section Ball Bearing | The Timken Company
Timken® thin section bearing line offers high accuracy and low profile design in standard stainless steel or chrome steel. Shop our full line including deep
HGT Thin Section Bearing
Items 1 - 10 of 31 - The HGT Thin Section Bearings produce contains seven series of open types and five series of sealed types, with bore diameter ranging from 1
Slim Section Bearings | Thin Section Bearings | Custom
Slim Section Bearings, Inc. is the manufacturing division of Ritbearing Corp., with experience in manufacturing that began in 1987. We are able to give our
Thin Section Ball Bearings - Metric Thin Section Bearings
Thin Section Ball Bearings were developed for applications where space limitations are of the utmost importance. As the name implies, the difference between the
What is a Thin Section Bearing and How Does it Reduce Cost?
Thin section bearings are a family of bearings designed from a limited number of widths and thicknesses (cross sections), with each cross section manufactured
Thin Section Bearings Online
518 results - Thin Section Bearings Online Online shopping by VXB bearings the online bearing store and supplier, wholesale prices and same day shipping, next
N Series Thin-Section Ball Bearings Metric and Inch Designs
Extremely thin-section ball bearings and roller bearings contributing to downsizing, weight saving, and reduction of torque loss of robots, construction equipments,
Thin Section Ball Bearings | Alpine Bearing
Request a quote for Thin Section ball bearings from Alpine Bearing here. Same-day shipping available on in-stock items
Thin Section Ball Bearings - RBC Bearings
Use RBC's selection guide to help you determine which of RBC's Thin Section Ball Bearings are best suited for your design application
KD110AR0/KD110CP0/KD110XP0 Reail-silm Thin-section Bearings (11x12x0.5 Inch) Video