| MMXC1008 Crossed Roller Bearing 40mmx68mmx15mm | Grease Limiting Speed (r/min):3000; Dynamic Load Rating (kN):250; d:75mm; Static Load Rating (kN):325; D:160mm; Availability:In Stock; Seals or Shields:Open Type; Weight:3.64 KGS; Cage Type:Steel; B:37mm; |
| KB090CP0 | d:3/4 in; seal type:Contact/Lip; finish/coating:Uncoated; maximum rpm:2400 RPM; series:RABR; radial static load capacity:1400 lb; inner ring width:1-7/32 in; radial dynamic load capacity:3200 lb; D:2.062 in; locking device:Eccentric Collar; |
| K36020XP0 Bearing 360mmx400mmx20mm | D:1.3125 in; bore type:Round; internal clearance:Normal Clearance; B:0.5000 in; d:0.5000 in; closure type:Double Shielded; |
| KB030XP0 Bearing 3.0x3.625x0.3125 Inch | series:SF-C CR; finish/coating:Uncoated; operating temperature range:-20 to +220 &de; d:0.6250 in; maximum rpm:6450 RPM; duty type:Standard Duty; replacement bearing:2-010C; D:2.1250 in; expansion type:Non-Expansion Bearin; lubrication type:Lubrication Fitting; |
| Thin Section Bearings CSCD055 139.7*165.1*12.7mm | SKU:23076ejw507c08c2-tim; Availability:In Stock; Static Load Rating (kN):5110; Cage Type:Steel; Dynamic Load Rating (kN):3070; D:560mm; Clearance:C2; d:380mm; Reference Speed Rating (r/min):830; Seals or Shields:Open Type; |
| KB080XP0/KXB080/CSXB080 Thin Section Bearing 203.2*219.075*7.938mm | Clearance:Standard; Seals or Shields:Open Type; Availability:In Stock; Cage Type:Brass; d:35mm; B:31mm; SKU:2307em-qbl; D:80mm; Weight:0.02 KGS; |
| 39330001 Bearing 120x180x25mm | locking device:Set Screw Collar; snap ring included:Without Snap Ring; bore type:Round; d:30 mm; B:1-1/2 in; finish/coating:Uncoated; maximum rpm:3800 RPM; cage material:Nylon; D:2.4409 in; outer ring width:18 mm; |
| MMXC1009 Thin-section Crossed Roller Bearing Size:45X75X16mm | maximum rpm:1490 RPM; base to bore centerline:3.2500 in; bore type:Round; housing material:Steel; overall length:10.4375 in; series:S-2000; radial static load capacity:53000 lb; finish/coating:Uncoated; D:7.7 to 8.4 in; radial dynamic load capacity:41500 lb; |
| KD250CP0 Reali-slim Bearing In Stock, 25.000X26.000X0.500 Inches | lubricant:#2 Lithium; expansion type:Non-Expansion Bearin; operating temperature range:200° °F; manufacturer catalog:Click here; application:General Industrial; misalignment angle:1-1/2 °; housing construction:Cast Iron; maximum rpm:3500 rpm; bearing type:4-Hole; compatible shaft diameter:1.0000 in; |
| KD047CP0 Reali-slim Bearing In Stock, 4.750X5.750X0.500 Inches | SKU:35tab07db/gmp4-nachi; Preload:Medium Preload; Grease Limiting Speed (r/min):3750; Cage Type:Plastic; Weight:0.29 KGS; Clearance:Standard; Limiting Axial Load (kN):54.3; B:15mm; d:35mm; D:72mm; |
| CSEF120-2RS Thin Section Bearings | housing material:Stainless Steel; duty type:Standard Duty; bore type:Round; overall height:1.5800 in; bolt size:0.3750 in; B:4.2500 in; manufacturer upc number:8865590326600; seal type:FDA approved silicon; mounting type:Four-Bolt Flange; d:1.1250 in; |
| KA020CP0/CSCA020 Reail-silm Thin Section Bearings 50.8X63.5X6.35mm | B:15/16 in; d:1.885 in; series:TTC; thrust bearing type:Tapered Race; fillet radius:0.03 in; operating temperature range:-65 to +250 &de; D:3.266 in; |
| KA035CP0 Reail-silm Thin Section Ball Bearings(3.5x4x0.25 Inch) Deep Groove Ball Bearing | Availability:In Stock; Cage Type:Steel; Weight:0.20 KGS; Seals or Shields:Open Type; SKU:61801-qbl; B:5mm; D:21mm; d:12mm; Clearance:Standard; |
| KF050AR0/KF050CP0/KF050XP0 Thin-section Bearings (5x6.5x0.75 Inch) | radial dynamic load capacity:2150 lbf; seal type:Contact with Flinger; B:9.8125 in; series:UCFL200; housing material:Cast Iron; lubrication type:Lubrication Fitting; replacement bearing:UC212-39; d:2.4375 in; mounting type:Two-Bolt Flange; locking device:Set Screw; |
| KA055AR0/KA055CP0/KA055XP0 Reail-silm Thin-section Bearings (5.5x6x0.25 In) | B:48 mm; contact angle:60 °; closure type:Open; precision rating:ABEC 7 (ISO Cla; finish/coating:Uncoated; D:40 mm; duplex type:Quadplex; internal clearance:C0; d:17 mm; |
| NRXT8013DDP5/NRXT8013EP5 Crossed Roller Bearing 80/110/13mm | head diameter:1-1/8 in; lubrication type:With Lubrication Fit; shank thread size:7/16-20 in; grade:Economy/General; head width:0.406 in; housing material:Steel; misalignment angle:21 °; ball width:0.562 in; rod end type:Female Threaded with; race material:None; |