| No. | Brand | A | h | b | U | S | N | K | w |
| 8060 | - | - | - | - | - | - | - | - | - |
| 12mm | - | - | - | - | - | - | - | - | - |
| 175 | NTN | - | - | - | - | - | - | - | - |
| A16/22/37/45/56/70/90/100 | YUKEN | - | - | - | - | - | - | - | - |
| Kfbb13006 | - | - | - | - | - | - | - | - | - |
| 6305ZZC4 | - | - | - | - | - | - | - | - | - |
| F11-010 | Parker | - | - | - | - | - | - | - | - |
| XY840875 | - | - | - | - | - | - | - | - | - |
| 4041 | - | - | - | - | - | - | - | - | - |
| 2200 | NSK | - | - | - | - | - | - | - | - |
| 2019 | - | - | - | - | - | - | - | - | - |
| 5x11x4mm | - | - | - | - | - | - | - | - | - |
| 12mm | - | - | - | - | - | - | - | - | - |
| 09263-22071-000 | - | - | - | - | - | - | - | - | - |
| 3" | - | - | - | - | - | - | - | - | - |
| 24VDC | Parker | - | - | - | - | - | - | - | - |
| 5mm | - | - | - | - | - | - | - | - | - |
| NKS25 | - | - | - | - | - | - | - | - | - |
| 1219-M | fag | - | - | - | - | - | - | - | - |
| 15mm/16mm/17mm/18mm | - | - | - | - | - | - | - | - | - |
| 0.5mm | - | - | - | - | - | - | - | - | - |
| 99.5% | - | - | - | - | - | - | - | - | - |
| 1088 | INA | - | - | - | - | - | - | - | - |
| 3m | - | - | - | - | - | - | - | - | - |
| AN30. | SKF | - | - | - | - | - | - | - | - |
| 1200*1000 | INA | - | - | - | - | - | - | - | - |
| NRXT30025DDP5/NRXT30025EP5 Crossed Roller Bearing 300/360/25mm | B:50mm; SKU:21322came4c3-nsk; Clearance:C3; Availability:In Stock; Grease Limiting Speed (r/min):1300; Dynamic Load Rating (kN):450; Cage Type:Brass; Oil Limiting Speed (r/min):1700; D:240mm; Seals or Shields:Open Type; |
| KF400CP0 Open Reali-slim Bearing In Stock, 40.000X41.500X0.750 Inches | Specific dynamic load factor K:25 N/mm²; Coefficient of friction µ max.:0.15; Coefficient of friction µ min.:0.08; Specific static load factor K0:45 N/mm²; Mass bushing:6.8 kg; a:8 mm; h:142 mm; d:140 mm; Tolerance shaft:e7; Permissible sliding velocity v min.:0 m/s; |
| Thin Section Bearings CSCC110 | material:Steel; series:TN; thread size:1.312-18 in; lock nut type:For Lock Washer; lock washer or locking device part number:TW065; D:2.068 in; overall nut width:0.448 in; |
| KXF200/KF200XPO/CSXF200 Thin Section Bearing 508*546.1*19.05 Mm | D:3/8 in; bearing material:Oil-Impregnated Sint; material specification:BOST-BRONZ; overall length:3/8 in; flange width:3/64 in; maximum pv value:50000; d:1/8 in; standards met:MIL-B-5687C Type I C; operating temperature range:Maximum of +250; |
| KC160AR0 Thin Section Bearing | standards met:MIL-B-5687C Type I C; maximum v value:1200 fp/min; inside diameter:1-1/16 in; operating temperature range:+10 to +22; thickness:1/16 in; maximum p value:2000 psi; nominal overall length:1/16 in; plug type:No Plugs; D:2-3/8 in; maximum pv value:50000; |
| MMXC1013 Crossed Roller Bearing 65mmx100mmx18mm | b:28 mm; D:420 mm; manufacturer product page:Click here; thread size:Tr360x5; Mass lock nut:12.4 kg; d2:375 mm; G:Tr 360x5; slot width:28 mm; series:HM; overall nut width:45 mm; |
| K09020XP0 Bearing 90mmx130mmx20mm | bearing type:Cylindrical Roller; finish/coating:Uncoated; B:2.1930 in; D:4.5000 in; d:2.5000 in; series:01; outer ring width:1.0625 in; maximum rpm:3940 rpm; expansion type:Expansion Bearing &#; inner ring width:2.1930 in; |
| KC080XP0 Bearing 8.0x8.75x0.375inch | radial static load capacity:2500 lb; replacement bearing:GRA102RRB; expansion type:Non-Expansion Bearin; duty type:Intermediate Duty; mounting type:Two-Bolt Flange; housing material:Malleable Iron; d:1.1250 in; finish/coating:Uncoated; B:4.4375 in; D:3.5625 in; |
| CSED180 Thin Section Bearings | cage material:No Cage; application:Airframe Control; maximum misalignment:10 °; bore type:Straight; bearing material:Steel; closure type:Double Sealed; internal clearance:C0; series:DSP; D:1.4375 in; inner ring width:23.8 mm; |
| CRBH258A Thin-section Crossed Roller Bearing | radial dynamic load capacity:168 kN; split bearing type:Split Roller Bearing; radial static load capacity:193 kN; expansion type:Expansion Bearing &#; cartridge width:4.9606 in; axial dynamic load capacity:8.8 kN; replacement split bearing only:02B208EX; operating temperature range:-70 to +100 &de; cartridge outside diameter:6.1874 in; outer ring width:38.9 mm; |
| KC042AR0 Reali-slim Bearing 4.250x5.000x0.375 Inch | bore type:Round; B:1.6875 in; series:SCHB; locking device:Set Screw Collar; d:1.1875 in; housing material:Cast Iron; replacement bearing:3-13; hanger unit type:Conveyor Hanger Unit; finish/coating:Uncoated; D:3.6250 in; |
| RB35020 Thin-section Crossed Roller Bearing 350x400x20mm | washer type:Thrust Washer; inside diameter:1-1/2 in; width:0.126 in; compatible bearing type:Needle Roller Thrust; D:2-3/16 in; compatible bearing part number:NTA-2435; |
| Top5 Thin Bearing Suppliers KC070Xp0 | lock washer or locking device part number:TW140; overall nut width:1.51 in; lock nut type:For Lock Washer; material:Steel; thread size:7.847-8 in; series:TAN; D:9.849 in; |
| KF090XP0 | d2:69.444 mm; M:42.85 mm; material:Steel; series:W; d:45.517 mm; tang thickness:0.048 in; key width:0.29 in; B:1.219 mm; outside diameter over tangs:2.734 in; |
| RE2508UU Thin-section Inner Ring Division Crossed Roller Bearing | B:33 mm; d:130 mm; maximum rpm:3800 RPM; precision rating:ABEC 1 (ISO Cla; series:100-KS; dynamic load capacity:23800 lbf; D:200 mm; closure type:Open; outer ring width:33 mm; finish/coating:Uncoated; |
| KB140CP0 Bearings 14.0X14.625X0.3125inch |
Thin section ball bearings, metric bearings, roller bearings
The Kaydon Reali-Slim® inch-standard bearing is one of the most widely used thin section bearings in the world. Kaydon thin bearing solutions save weight,
HGT Thin Section Bearing
Items 1 - 10 of 31 - The HGT Thin Section Bearings produce contains seven series of open types and five series of sealed types, with bore diameter ranging from 1
What is a Thin Section Bearing and How Does it Reduce Cost?
Thin section bearings are a family of bearings designed from a limited number of widths and thicknesses (cross sections), with each cross section manufactured
Thin Section Ball Bearings - Metric Thin Section Bearings
Thin Section Ball Bearings were developed for applications where space limitations are of the utmost importance. As the name implies, the difference between the
Thin Section Ball Bearings | Alpine Bearing
Request a quote for Thin Section ball bearings from Alpine Bearing here. Same-day shipping available on in-stock items
Thin Section Ball Bearing | The Timken Company
Timken® thin section bearing line offers high accuracy and low profile design in standard stainless steel or chrome steel. Shop our full line including deep
Thin Section Bearings Online
518 results - Thin Section Bearings Online Online shopping by VXB bearings the online bearing store and supplier, wholesale prices and same day shipping, next
N Series Thin-Section Ball Bearings Metric and Inch Designs
Extremely thin-section ball bearings and roller bearings contributing to downsizing, weight saving, and reduction of torque loss of robots, construction equipments,
Slim Section Bearings | Thin Section Bearings | Custom
Slim Section Bearings, Inc. is the manufacturing division of Ritbearing Corp., with experience in manufacturing that began in 1987. We are able to give our
Thin Section Ball Bearings - RBC Bearings
Use RBC's selection guide to help you determine which of RBC's Thin Section Ball Bearings are best suited for your design application
CRBC50050 Thin-section Crossed Roller Bearing Video