| KC180XP0 Bearing 18.0x18.75x0.375inch | ba:57.944 mm; Stabilizing ring:SR-26-0; End plug (suffix Y):EPR 15; h:60.325 mm; P120°:125 kN; H1:152.4 mm; P150°:118 kN; R1:79.375 mm; S:4.763 mm; PG:1/4 NPT; |
| RA18013 Thin Section Bearing 180x206x13mm | abma precision rating:Class 2; flange type:Non-Flanged Cup; cup width:0.6537 in; D:2.8910 in; material:Chrome Steel; single or double cup:Single Cup; series:LM; finish/coating:Uncoated; manufacturer upc number:053893625034; compatible cone:LM501349; |
| MMXC1018 Crossed Roller Bearing 90mmx140mmx24mm | SKU:6316ddu-nsk; Seals or Shields:Two Rubber Seals; Clearance:Standard; Weight:3.67 KGS; Static Load Rating (kN):86.5; B:39mm; Cage Type:Steel; Grease Limiting Speed (r/min):2800; d:80mm; D:170mm; |
| K18013AR0 Bearing 180mmx206mmx13mm | compatible housed unit:SAF224, SAF320, SAF5; material:Steel; bearing type:Spherical Roller; number of rings required:1; |
| CRBC 05013 High Precision Crossed Roller Bearing 50mmx80mmx13mm | lubrication type:Lubrication Fitting; series:UCFS300; locking device:Set Screw; duty type:Heavy Duty; radial static load capacity:1120 kgf; length through bore:38 mm; seal type:Contact with Flinger; expansion type:Non-Expansion Bearin; replacement bearing:UC305; mounting type:Four-Bolt Flange; |
| KA020CP0 Reali-slim Bearing In Stock, 2.000X2.500X0.250 Inches | material:Aromatic Polyamide; D:20 mm; standards met:RoHS; material specification:Aramid M; overall length:200 mm; |
| MMXC1936 Thin-section Crossed Roller Bearing Size:180X250X33mm | expansion type:Non-Expansion Bearin; replacement bearing:1-14C; d:1.2500 in; bore type:Round; inner ring width:1.5000 in; lubrication type:Lubrication Fitting; duty type:Standard Duty; length through bore:1.5000 in; housing width:1.1719 in; D:4.5938 in; |
| 6230 Bearing 150x270x45 Open Large Ball Bearings In Stocks | da:96.838 mm; PG:1/4 NPT; Ca:62.789 mm; PosiTrac Plus contact element:2 x B10724-109; RG:3/8 NPT; Housing:SAF 522; R2:31.75 mm; Pa:12.5 kN; ba:42.069 mm; J max.:368.3 mm; |
| SC070AR0 BEARING 7.000X7.750X0.375 INCH | thread type:UNF-3B; d:0.1900 in; shank thread size:.1900-32; length to ball center:1.0620 in; shank thread length:0.5620 in; series:Heim®; race material:Steel; ball material:52100 Alloy Steel; lubrication type:Non-Lubricatable; misalignment angle:6.5 °; |
| KC045AR0 Reali-slim Bearing 4.500x5.250x0.375 Inch | roller width:11.8 mm; bearing element:Needle Rollers; roller diameter:30 mm; d:10 mm; radial static load capacity:2070 lbf; closure type:Open; roller shape:Crowned; finish/coating:Uncoated; maximum rpm:14300 RPM; operating temperature range:-30 to +140 &de; |
| 39349001 Bearing 600x700x40mm | shank thread length:33 mm; length to ball center:54 mm; ball width:16 mm; misalignment angle:17 °; grade:Precision; d:12 mm; series:MK; ball material:52100 BEARING STEEL; housing material:Carbon Steel - corro; axial static load capacity:18,494 N; |
| KF047AR0 Reali-slim Bearing In Stock, 4.750X6.250X0.750 Inches | Grease Limiting Speed (r/min):3800; Clearance:Standard; Dynamic Load Rating (kN):375; D:240mm; Static Load Rating (kN):660; SKU:nn3032w33m2kp4-nachi; Availability:In Stock; Oil Limiting Speed (r/min):4500; Weight:8.92 KGS; d:160mm; |
| KA055CP0 Reali-slim Bearing In Stock, 5.500X6.000X0.250 Inches | thread direction:Right Hand; housing material:Carbon Steel; d:1.0000 in; grade:Precision; lubrication type:Zerk Fitting; race material:1-Piece Carbon Steel; ball material:Alloy Steel Heat Tre; rod end type:Female Threaded; |
| KB040XP0 Bearing 4.0x4.625x0.3125 Inch | groove type:Graphite-Filled Groo; overall length:0.5000 in; bushing outside diameter:0.5938 in; bushing type:Plain; inside diameter:0.5000 in; bushing material:PTFE; |
| MMXC1026 Thin-section Crossed Roller Bearing Size:130X200X33mm | Speed Rating (r/min):5300; Dynamic Load Rating (kN):302.5; Clearance:Standard; B:45mm; Availability:In Stock; Static Load Rating (kN):305.2; Cage Type:Plastic; SKU:2mm230wicrsul-timken; Seals or Shields:Open Type; d:150mm; |
| JG220CP0 BEARING 22.000X24.000X1.000 INCH | standards met:ASTM B505, ASTM B271; material:Cast Aluminum Bronze; maximum pv value:125000; material specification:C954; d:3 in; overall length:13 in; operating temperature range:-450 to +1200 &; groove/plug type:None; maximum p value:6000 psi; maximum v value:250 fp/min; |