| 30218 GCr15 Taper Roller Bearing | L:206 mm; Designation of bearing:UC210G2L4; A:60 mm; B:51.6 mm; d:50 mm; Designation of housing:P210N-; Z:76 mm; N:20mm; G:M6x1; T min.:-20 °C; |
| 60 mm x 130 mm x 31 mm 12580/20 Non-standard Tapered Roller Bearing | C:31.85 kN; A5:21.4 mm; SW:4 mm; L1:260 mm; H2:61 mm; S:21.4 mm; B1:56.3 mm; Z:23.5 mm; H:120 mm; G:R1/8"; Size (mm):60 mm x 130 mm x 31 mm ; |
| Discount Tapered Roller Bearing 30316 | Unit, Type:Insert Bearing Unit; Unit Body Material:Cast Iron; RoHS:6; Surface Treatment:No; Basic Load Rating, Static Rating(N):19300; Fit:J7; Bearing Unit, Type:Take-Up Type; Grease Type:Standard Grease; |
| 30228 Tapered Roller Bearings 140x250x42mm | Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Black Oxide Coating; Type:Bearings with Housin; Width T(mm):16; Height H(mm):30 ～ 50; RoHS:6; Number of Bearings:Single; Bearing I.D. d(mm):17; |
| Roller Bearing 32217 | Ca max:4.98 mm; D:62 mm; b min:1.9 mm; a min:3.07 mm; Fatigue limit load, Cu:0.51 kN; d:30 mm; Nlim (grease):11,000 rpm; D3 max:59.61 mm; Characteristic inner ring frequency, BPFI:5.42 Hz; rs min:1 mm; |
| 30322 Tapered Roller Bearing 110*240*50mm | d:12.7 mm; J:63.5 mm; T max.:100 °C; A1:4 mm; C:9.55 kN; N:7,1mm; C0:4.78 kN; s1:23.05 mm; B:19.1 mm; A:6.7 mm; |
| 9380/9321 Bearing 76.2X171.45X46.038mm | Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Electroless Nickel P; Housing Material:1045 Carbon Steel; Number of Bearings:Single; Bearing Part Number:6904; Bearing Material:[Steel] Steel; Flange Shape:Compact Type; Width T(mm):15; Seals:DD (Contact Rubber S; |
| 30214 Taper Roller Bearing 70*125*26.25mm | Thread Size:M3; Inner rings PCD:112 mm; Da:157 mm; da:139 mm; B:25 mm; Mounting Hole Countersink Diameter:14 mm; Oil Holes:3 mm; Dynamic Load Rating:46 kN; Number of Mounting Holes:12; Chamfer:1.5 mm; |
| LM451349DWX 902E5 Tapered Roller Bearing Four Row Assembly | Weight:5.59 kg; J:184 mm; C:72.5 kN; G:R1/8"; Designation of housing:FCE216-; C0:54.2 kN; s1:41.3 mm; H3:160; B:82.6 mm; Recommended tightening torque for set screw:27.1 Nm; |
| HH231637/HH231610 Taper Roller Bearing | da min:19 mm; Nref:20,000 rpm; Characteristic rolling element frequency, BSF:5.38 Hz; Characteristic outer ring frequency, BPF0:4.1 Hz; Fatigue limit load, Cu:0.18 kN; Static load, C0:3.3 kN; rs min:0.3 mm; Characteristic cage frequency, FTF:0.41 Hz; Min operating temperature, Tmin:-40 °C; Max operating temperature, Tmax:120 °C; |
| 32210 50*90*23mm | Low Torque Specification:No; Specifications:Standard; Special Configurations Code:No; Seal, Shield Symbols:No; Load Direction:Radial; Raceway Ring Shape:Cylindrical Roller; Symbol of Bearing Ring Shape:E; Outer Ring:With Outer Ring; Bearing Ring Type:Type NU; |
| LM11949/10 Tapered Roller Bearing 19.05x45.237x16.637mm | Bearing Used:Deep Groove Ball Bea; Shape:Flange Type; Bearing Part Number:6002; Width T(mm):14; Flange Shape:Compact Type; Number of Bearings:Single; Bearing I.D. d(mm):15; Days to Ship:8 Days; Housing Material:304 Stainless Steel; Bearing Material:[Steel] Steel; |
| 30 mm x 62 mm x 16 mm Tapered Roller Bearing 9386H/9321 | N:16mm; L:130 mm; Dz:110 mm; S:11.8 mm; Recommended tightening torque for set screw:8 Nm; s1:22.65 mm; A1:20 mm; T min.:-20 °C; L1:104 mm; C0:29.2 kN; Size (mm):30 mm x 62 mm x 16 mm ; |
| HM926749/10 Tapered Roller Bearing 127.7925x228.6x53.975mm | Number of Bearings:Double; Flange O.D. H(φ):56; Holder Surface Treatment:Electroless Nickel P; Bearing Retained:Yes (with retaining; Housing Material:1045 Carbon Steel; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Seals:VV (Non-Contact Rubb; |
| 30209 Taper Roller Bearings | Shape:Flanged Pilot Type; Bearing Material:[Steel] Steel; Type:Bearings with Housin; Number of Bearings:Double; Width T(mm):55 ～ 80; Bearing Part Number:6005; Seals:VV (Non-Contact Rubb; Bearing Used:Deep Groove Ball Bea; RoHS:6; |
| 32215 Tapered Roller Bearing | Flange O.D. H(φ):44; Bearing Used:Deep Groove Ball Bea; Volume Discount:Available; Bearing Part Number:626; Bearing Retained:Yes (with retaining; Number of Bearings:Double; Holder Surface Treatment:Clear Anodize; Bearing I.D. d(mm):6; Seals:ZZ (Double Shield); |