| Taper Roller Bearings H924045/924010D | C:22.36 kN; A3:2.5 mm; Recommended tightening torque for set screw:11.5 Nm; B1:46.8 mm; d1:42.8 mm; C0:11.5 kN; B:34.9 mm; Designation of bearing:EX305G2L3; G:M6x1; SW:4 mm; |
| EE129119D 90046 Inch Tapered Roller Bearing | Bearing Inner Dia. Shape:Tapered hole adapter; Grease Type:Standard Grease; Stroke:No; d:45; Bearing Unit, Type:Square flange shape; Unit, Type:Insert Bearing Unit; Unit Body Material:Cast Iron; Seal:Nitrile; Basic Load Rating, Static Rating(N):29400; |
| 67986DGW 902A7 Inch Taper Roller Bearing | Dynamic load, C:18.7 kN; f0:16.2; Max operating temperature, Tmax:110 °C; Static load, C0:19 kN; Brand:NTN; Mass:0.27 kg; Fatigue limit load, Cu:0.86 kN; da min:90 mm; B:13 mm; Characteristic inner ring frequency, BPFI:12.34 Hz; |
| HM259049D 902B4 Inch Tapered Roller Bearing | B1:43.7 mm; D:90 mm; d:49.21 mm; d1:67.2 mm; Weight:0.83 kg; C1:6.5 mm; Recommended tightening torque for set screw:8 Nm; B2:18.3 mm; m:6.5 mm; S:11 mm; |
| HM259049D 902B2 Inch Tapered Roller Bearing | Height H(mm):20 ～ 30; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Single; Bearing Part Number:608; Lateral Width L(mm):53; Holder Surface Treatment:Clear Anodize; Height Indication:Height Selection; Shape:T-Shaped; Bearing I.D. d(mm):8; |
| 95 mm x 170 mm x 32 mm LM11949/LM11910 Single Row Taper Roller Bearing | Surface Treatment:No; Bearing Unit, Type:Take-Up Type; Unit, Type:Bearing unit; Unit Body Material:Cast Iron; Days to Ship:9 Days; B:270; Basic Dynamic Load Rating Cr(N):110000; d:95; Size (mm):95 mm x 170 mm x 32 mm ; |
| HH234040/HH234010 Tapered Roller Bearings | RoHS:6; Number of Bearings:Single; Bearing Material:[Steel] Steel; Width T(mm):15; Holder Surface Treatment:Black Oxide Coating; Bearing Used:Deep Groove Ball Bea; Lateral Width L(mm):58; Type:Bearings with Housin; Shape:T-Shaped; |
| 30205 Bearing | Bearing Material:[Steel] Steel; Number of Bearings:Double; Bearing Used:Deep Groove Ball Bea; Seals:DD (Contact Rubber S; Type:Bearings with Housin; Bearing Part Number:626; Shape:Flanged Pilot Type; Holder Surface Treatment:Clear Anodize; Flange O.D. H(φ):44; Bearing Retained:No; |
| Taper Roller Bearing 32220 | Fatigue limit load, Cu:0.47 kN; rs min:1 mm; Mass:0.16 kg; Nlim (grease):12,000 rpm; Brand:NTN; B:14 mm; f0:14.8; D:62 mm; ra max:1 mm; Static load, C0:10.3 kN; |
| HRBQC Bearings 6209 Deep Groove Ball Bearings | Shape:T-Shaped; Number of Bearings:Single; Width T(mm):16; Bearing I.D. d(mm):12; C Chamfered:Provided; Bearing Used:Deep Groove Ball Bea; Bearing Retained:Yes (with retaining; Height H(mm):20 ～ 40; Type:Bearings with Housin; Days to Ship:8 Days; |
| 657/652 Tapered Roller Bearing 73.025x152.400x41.275mm | Holder Surface Treatment:Black Oxide Coating; Bearing Part Number:6208; C Chamfered:Not Provided; Number of Bearings:Single; Shape:T-Shaped; Days to Ship:8 Days; RoHS:6; Width T(mm):27; Bearing Retained:Yes (with retaining; Bearing I.D. d(mm):40; |
| 42683/42620 Tapered Roller Bearing 73.025x127x30.162mm | d:57.15 mm; e:29 mm; B:65.1 mm; Z:42.8 mm; S:25.4 mm; Recommended tightening torque for set screw:16.8 Nm; G:M6x1; L:175 mm; Weight:4.47 kg; A1:18 mm; |
| EE130900D/131400 Tapered Roller Bearing | static load capacity:17800 N; Static load, C0:17.8 kN; finish/coating:Uncoated; Enclosure:Open; row type & fill slot:Single Row Non-Fill; Precision Class:ABEC 1 | ISO P0; Product Group:B00308; Bore:1.575 Inch | 40 Mill; Characteristic inner ring frequency, BPFI:5.39 Hz; Characteristic outer ring frequency, BPF0:3.61 Hz; |
| Tapered Roller Bearing 32306 | H1:10 mm; s1:11 mm; G:M6x1; Recommended tightening torque for set screw:3.5 Nm; S:6 mm; A:30 mm; A1:18 mm; B:22 mm; T min.:-20 °C; Designation of bearing:US202G2; |
| Fine SET-13 Inch Tapered Roller Bearings | C:31.85 kN; G:M6x1; A:49 mm; A5:30.2 mm; N:29mm; Recommended tightening torque for set screw:11.5 Nm; N1:19 mm; S:19 mm; C0:20.8 kN; SW:4 mm; |
| Fine 30217 Taper Roller Bearings | Basic Load Rating, Static Rating(N):36200; Unit Body Material:Cast Iron; Fit:J7; Rolling Element Material:Bearing Steel; Grease Type:Standard Grease; Seal:Nitrile; Surface Treatment:No; Unit, Type:Insert Bearing Unit; d:60; Stroke:No; |