| No. | Brand | L | B | D | d | h | K | H | d1 |
| CH4 | - | - | - | 460mm | 300mm | - | - | - | - |
| 2-PC | Parker | - | - | - | - | 40.481 mm | - | - | - |
| 6001-2RSLTN9/HC5C3WT | - | - | - | 8.5000 in | - | - | - | - | - |
| 6803 | - | - | - | 143 mm | 55 mm | - | - | - | - |
| 8V-B8LJ-SSP-C3. | Parker | - | - | 100 mm | 55 mm | - | - | - | - |
| 3 | - | - | - | - | 2.9375 in | - | - | - | - |
| 10pc | - | - | 1.2500 in | - | 1.5000 in | - | - | - | - |
| ABEC-7 | - | - | 3/4 in | - | 1-1/8 in | - | - | - | - |
| AD-12X: | - | - | 8mm | 30mm | 12mm | - | - | - | - |
| 1.8mm | - | - | - | 1.0937 in | 0.5625 in | - | - | - | - |
| 4'x8' | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | 20mm | 140mm | 100mm | - | - | - | - |
| 12mm | - | - | - | - | - | - | - | - | - |
| 2K | - | - | - | 72mm | 35mm | - | - | - | - |
| 215K, | FAFNIR | - | - | 533.4 mm | - | - | - | - | - |
| 9101PP | FAFNIR | - | 9mm | 37mm | 20mm | - | - | - | - |
| 2007-2008 | NSK | - | - | 3.2500 in | 1.1250 in | - | - | - | - |
| 1977-1981 | Timken | - | - | 180mm | 100mm | - | - | - | - |
| E1 | - | - | 5.0000 in | 9.0000 to 10.5000 i | - | - | - | - | - |
| 4X8 | - | - | - | 105 mm | - | - | - | - | - |
| 5mm | - | - | - | 2.7500 in | - | - | - | - | - |
| N21% | - | - | - | - | 80 mm | - | - | - | - |
| 2pcs | - | - | - | 110 mm | - | - | - | - | - |
| 1200.20.00. | - | - | - | - | - | - | - | - | - |
| 3kg | - | - | 28mm | 300mm | 240mm | - | - | - | - |
| 10t | - | - | - | - | 240 mm | - | - | - | - |
| 23 | - | - | - | - | - | - | - | - | - |
| 33 | - | - | - | 3.2500 in | - | - | - | - | - |
| 227-6089 GEAR GP-BRG Swing Bearing For Caterpillar 336DLN Excavator | bolt size:3/8; overall length:5.5000 in; d:1.0000 in; B:1-17/32 in; seal type:Dual Lip with Slinge; base width:1-1/2 in; base to bore centerline:1.4375 in; replacement bearing:MUC205-16RF; mounting:Two-Bolt Base; series:MUCPPL200RFW; |
| 110-7167 GEAR G For Caterpillar 322LFM Excavator | α:6 °; d:40 mm; l1 min.:76 mm; Basic static load rating C0:140 kN; Specific dynamic load factor K:150 N/mm²; l2 max.:194 mm; C1 max.:24 mm; l7 min.:46 mm; Mass rod end:1.9 kg; Basic dynamic load rating C:150 kN; |
| R55-5 HYUNDAI Crane Slewing Bearing | harmonization code:3926904590.US; manufacturer catalog number:29619-3699; typical application:Exceptional Bearing; D:4.4400 in; width:0.6250 in; shaft diameter:3.4375 in; maximum shaft surface speed:12000 fpm; lip material:Labyrinth; Weight:1.75 lbs; continuous temperature range:-22 to 400°F; |
| 114-1434 GEAR G Swing Bearing For Caterpillar 330 Excavator | Static Load Rating (kN):8.9; Seals or Shields:Open Type; Weight:0.52 KGS; B:23mm; Dynamic Load Rating (kN):28.5; SKU:2209-tvh-fag; Clearance:Standard; Fatigue Load Rating (kN):0.55; Reference Speed Rating (r/min):8700; D:85mm; |
| 22U-25-00210 Swing Bearing For PC228USLC Excavator Bulldozer Loader Parts | B:0.9375 in; D:5.0000 in; internal clearance:Normal Clearance; manufacturer upc number:747023004331; d:2.5000 in; |
| 227-6081 GEAR GP-BRG For Caterpillar 320CFMST Excavator | bolt size:0.7500 in; bore type:Round; B:4.5000 in; housing construction:Split Pillow Block; overall length:13.5000 in; locking device:Double Set Screw; lubrication type:Lubrication Fitting; base width:3.1250 in; seal type:Contact Seal; mounting:Two-Bolt Base; |
| ZAX750 Crane Slewing Bearing | B:0.3590 in; outside diameter design:Straight; d:0.3750 in; precision rating:Not Rated/Ungro; D:1.0469 in; separable or banded:Banded; thrust bearing type:Unground; series:600; |
| 0.866 Inch | 21.996 Millimeter x 0 Inch | 0 Millimeter x 0.655 Inch | 16.637 Millimeter 205-25-71103 Swing Bearing For PC200LC-3 Excavator Bulldozer Loader Parts | end cap type:Open End Cap; material:PBT Thermoplastic; compatible bore diameter:15/16 in; color:Orange; Size (mm):0.866 Inch | 21.996 Millimeter x 0 Inch | 0 Millimeter x 0.655 Inch | 16.637 Millimeter ; |
| Caterpillar 325DFMLLA Log Loader Swing Bearing 227-6087 GEAR GP-BRG | outer ring width:10 mm; radial dynamic load capacity:48700 N; misalignment angle:10 °; D:30 mm; inner ring width:14 mm; operating temperature range:-30 to +130 &de; standards met:ISO-12 240-1; radial static load capacity:81200 N; outer ring material:Steel; bearing type:Radial; |
| 227-6087 GEAR GP-BRG Swing Bearing For Caterpillar 329D Excavator | dynamic load capacity:1260 lb; snap ring included:Without Snap Ring; static load capacity:653 lbs; maximum rpm:23000 rpm; D:1.3750 in; bore type:Round; row type & fill slot:Single Row Non-Fill; manufacturer catalog:Click here; finish/coating:Uncoated; closure type:Double Shielded; |
| 169-5537 GEAR GP-BRG Swing Bearing For Caterpillar 345BIIMH Excavator | Bearing:1220; End plug (suffix Y):EPR 15; A1:111.125 mm; Cap bolt, SAE grade:5; Labyrinth ring (db shaft position):LOR 118; Bearing limiting speed:3400 r/min; Cap bolt:2 x 3/4-10 UNC; N1:25.4 mm; P150°:46.3 kN; R1:58.737 mm; |
| Komatsu PC200-8 Excavator Slewing Bearing | B:23 mm; bore type:Round; finish/coating:Uncoated; d:40 mm; closure type:Double Shielded; row type & fill slot:Single Row Non-Fill; snap ring included:Without Snap Ring; D:90 mm; internal clearance:C0; |
| ZAX60 Crane Slewing Bearing | Weight:0.40 KGS; Availability:In Stock; Limiting Speed Rating (r/min):15000; Fatigue Load Rating (kN):1.61; Clearance:Standard; SKU:7208-b-mp-ua-fag; Seals or Shields:Open Type; B:18mm; D:80mm; Cage Type:Brass; |
| 353-0490 GEAR GP-BRG For Caterpillar 349DOEM Excavator | operating temperature range:-392 to +536 &d; maximum pv value:3.60 N/mm²; series:LFB; bushing type:Straight Bushing; maximum p value:49 N/mm²; standards met:RoHS; bushing outside diameter:3.6875 in; overall outside diameter:3.6875 in; max v value:0.65 m/s; bushing material:PTFE w/ Metal B; |
| Komatsu PC160-7 Excavator Slewing Bearing | replacement bearing:UC210-50mm; expansion type:Non-Expansion Bearin; manufacturer upc number:8865590650408; series:UCT; d:50 mm; overall length:5.8438 in; slot width:0.6875 in; overall height:4.5938 in; housing material:Cast Iron; locking device:Set Screw; |
| 227-6087 GEAR GP-BRG Swing Bearing For Caterpillar 329DLN Excavator | manufacturer upc number:053893237077; cup width:1.6875 in; D:4.4375 in; abma precision rating:Class 2; |
227-6087 GEAR GP-BRG For Caterpillar 2290 Feller Buncher Video