| No. | Brand | L | B | D | d | h | K | H | d1 |
| 722 | INA | - | 104 mm | 400 mm | 260 mm | - | - | - | - |
| 1977-1981 | Timken | - | - | 180mm | 100mm | - | - | - | - |
| 250 | - | - | - | 76 mm | 60 mm | - | - | - | - |
| 4X8 | - | - | - | - | 7.0000 in | - | - | - | - |
| SL02-4930A | INA | - | 13mm | 110mm | 85mm | - | - | - | - |
| 345B | INA | - | - | 30 mm | - | - | - | - | - |
| 3mm | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | 3.6250 in | - | - | - | - | - |
| 1.2 | fag | - | 21 mm | - | 55 mm | - | - | - | - |
| 35-50, | - | - | 0.2813 in | 2.2500 in | - | - | - | - | - |
| (3) | SKF | - | - | 1-1/8 in | - | - | - | - | - |
| ip65 | - | - | - | - | - | - | - | - | - |
| 50 | - | - | - | - | - | - | - | - | - |
| 33011F | - | - | - | 1 in | - | - | - | - | - |
| 12125-02-9 | - | - | - | 23 mm | - | - | - | - | - |
| N0344FE-NMSB | Parker | - | - | - | 3.9375 in | - | - | - | - |
| 9 | - | - | - | 118.9 to 138.2 mm | - | - | - | - | - |
| P/N:AS4565 | INA | - | - | - | 45 mm | - | - | - | - |
| 7003CYP4 | Nachi | - | - | - | - | - | - | - | - |
| AD-12X: | - | - | 8mm | 30mm | 12mm | - | - | - | - |
| 130x230x64 | - | - | - | 1-1/8 in | 15/16 in | - | - | - | - |
| 12 | - | - | - | - | - | - | - | - | - |
| 2023206 | - | - | - | 83 mm | 30 mm | - | - | - | - |
| 1045 | - | - | 41mm | 180mm | 85mm | - | - | - | - |
| (4D95) | - | - | 1-17/32 in | 108 to 127 mm | - | - | - | - | - |
| 75BNR19S | - | - | 1-3/16 in | 3 in | 1-3/16 in | - | - | - | - |
| EX200-2 Slew Bearing For Crane | washer type:Thrust Washer; race type:Grooved; manufacturer upc number:4012801182676; inside diameter:52 mm; material:Steel; D:72 mm; B:7.5 mm; |
| R225-7 Crane Slewing Bearing | d:480 mm; outer ring type:Not Split; D:870 mm; precision rating:Not Rated; bore type:Straight; maximum rpm:740 RPM; closure type:Open; B:310 mm; internal clearance:C0; fillet radius:6 mm; |
| 227-6089 For Caterpillar 330CL Excavator | |
| 227-6087 For Caterpillar 325CFMHW Excavator | cage material:Steel; closure type:Open; cone width:41 mm; flange type:Non-Flanged Cup; dynamic load capacity:310000 N; series:303; D:180 mm; finish/coating:Uncoated; operating temperature range:-30 to +120 &de; maximum rpm:4050 RPM; |
| 353-0558 GEAR GP-BRG Slewing Bearing For Caterpillar 532 Feller Buncher | Stabilizing ring:2 x 38151-24; P120°:64.9 kN; h:40.481 mm; N1:22.225 mm; H1:114.3 mm; RG:3/8 NPT; Initial grease fill:181.44 g; End plug (suffix Y):EPR 14; Appropriate attachment bolt size G:0.75 in; Ca:55.804 mm; |
| EX300-2 Slew Bearing For Crane | width:1 mm; inside diameter:90 mm; D:120 mm; washer type:Thrust Washer; compatible bearing type:Needle Roller Thrust; compatible bearing part number:AXK, K811; |
| 191-2557 For Caterpillar 330B Excavator | Limiting Speed Rating (r/min):1100; Cage Type:Brass; D:440mm; Dynamic Load Rating (kN):2330; d:240mm; Clearance:C2; SKU:22248kembw33w45ac2-t; B:120mm; Reference Speed Rating (r/min):1300; Seals or Shields:Open Type; |
| 333-3009 GEAR GP-BRG Slewing Bearing For Caterpillar 374DL Excavator | |
| R110-7 Crane Slew Bearing | operating temperature range:Max 350°; ball material:Alloy Steel - heat t; radial static load capacity:2000 lb; housing material:Carbon Steel - corro; ball width:.3750 in; axial static load capacity:200 lb; lubrication:Grease; manufacturer catalog number:1580408000; head width:.2810 in; d:0.2500 in; |
| 353-0654 GEAR GP BRG Swing Bearing For Caterpillar 325DLOEM Excavator | duty type:Normal Duty; lubrication type:Lubrication Fitting; housing material:Cast Iron; manufacturer catalog:Click here; locking device:Set Screw; base to bore centerline:1.3125 in; mounting:Two-Bolt Base; replacement bearing:UC204-12; overall length:5.0000 in; overall height:2.5313 in; |
| Caterpillar 329EOEM Swing Bearing 353-0654 GEAR GP BRG | d:115 mm; closure type:Sealed; B:28 mm; internal clearance:T1; D:240 mm; manufacturer upc number:4549557019746; |
| 227-6089 GEAR GP-BRG Swing Bearing For Caterpillar 330DLN Excavator | Static Load Rating (kN):50; SKU:nn3007m2kc1nap5-nach; B:20mm; Grease Limiting Speed (r/min):15800; D:62mm; Availability:In Stock; Oil Limiting Speed (r/min):18600; Cage Type:Brass; Seals or Shields:Open Type; d:35mm; |
| 199-4558 GEAR GP-BRG Swing Bearing For Caterpillar 330C Excavator | Da:215.001 mm; P120°:72.5 kN; Pa:14 kN; H:258.762 mm; P90°:111 kN; Adapter sleeve assembly:SNW 120x3.1/2; A2:254 mm; Taconite seal:TER 103; Appropriate attachment bolt size G:0.75 in; J min.:336.55 mm; |
| 227-6094 GEAR GP-BRG Slewing Bearing For Caterpillar 345BIIL Excavator | |
| 227-6089 For 330DLOEM Excavator | d:80 mm; ring separation:Separable Ring; flanges:(4) Flange; number of rows:1; maximum rpm:6100 RPM; bore type:Straight; operating temperature range:-30 to +120 &de; fillet radius:2 mm; finish/coating:Uncoated; cage material:Polyamide; |
| 353-0558 For 325C Excavator | d:180 mm; outer ring width:74 mm; manufacturer product page:Click here; lubrication holes:No Holes; static load capacity:1340 kN; B:74 mm; fillet radius:2.1 mm; D:280 mm; cage material:Steel; bore type:Straight; |
353-0490 GEAR GP-BRG Swing Bearing For Caterpillar 345DL Excavator Video