| No. | Brand | b | B | e | f | m | s | Q | X |
| N21 | - | - | 9,525 mm | - | - | 0,29 kg / Weight | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 21% | - | - | - | - | - | - | - | - | - |
| PC200-7 | - | - | - | - | - | - | 6,5 mm | - | - |
| 8mm | - | - | - | - | - | - | - | - | - |
| 2019 | - | - | - | - | - | - | - | - | - |
| 933-17220-21-00 | - | - | - | - | - | - | - | - | - |
| 6220C3 | NTN | - | - | - | - | - | - | - | - |
| KAA10XL0 | RBC | - | - | - | - | - | - | - | - |
| 17Pc | - | - | - | - | - | - | - | - | - |
| 304 | - | - | - | - | - | - | - | - | - |
| (MH-1) | - | - | - | - | - | - | - | - | - |
| 9Way | - | - | - | - | - | - | 2 mm | - | - |
| D12D | - | - | 7 mm | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| NUP310ECNP/C3 | SKF | - | - | - | - | - | - | - | - |
| NU2334EX.M1 | - | - | - | - | - | - | - | - | - |
| 220g | INA | - | - | - | - | 2 lbs / Weight | - | - | - |
| 0-10V | - | - | - | - | - | 0,154 kg / Weight | - | - | - |
| GE70ES | SKF | - | - | - | - | - | - | - | - |
| 8.5x11 | - | - | - | - | - | - | - | - | - |
| 6006 | SKF | - | - | - | - | - | - | - | - |
| 94%Min | - | - | - | - | - | - | - | - | - |
| 5 | - | - | 64 mm | - | - | - | - | - | - |
| 1103KLLG+COL | FAFNIR | - | 2,38 mm | - | - | - | - | - | - |
| 4mm | INA | - | 208 mm | - | - | - | - | - | - |
| A1 | - | - | - | - | - | - | - | - | - |
| S3508.2RSR.C3 | fag | - | 14 mm | - | - | - | - | - | - |
| CRBH8016A Crossed Roller Bearing 80X120X16mm | Bearing number:6808NKE; ra max.:0.3 mm; Outer Diameter (mm):52; da min.:42 mm; C:7 mm; Size (mm):40x52x7; Brand:NACHI; d:40 mm; Basic dynamic load rating (C):5,95 kN; Width (mm):7; |
| 130.32.1120 Slewing Bearing 950x1284x182mm | C:30,162 mm; Basic dynamic load rating (C):53,3 kN; Brand:FBJ; Basic static load rating (C0):43,6 kN; Bore Diameter (mm):50; Weight:0,67 Kg; D:90 mm; Width (mm):30,162; Size (mm):50x90x30.162; d:50 mm; |
| I.1400.32.00.C Slewing Bearing With Internal Gear 1112x1400x90mm | Enclosure:Double Seal; Configuration:Single Row; B:17 mm; d:25 mm; da (min):32 mm; Bore Type:Cylindrical Bore; Dynamic Load Rating:23,600 N; Da (max):55 mm; Factor fo:12.2; D:62 mm; |
| R205-7 Excavator HYUNDAI Double Row Slewing Bearing 1327*1083*110mm | Weight:136 g; L3:43.0 mm; L2:21 mm; i:29.0 mm; S1:18 mm; t1:7 mm; Appropriate Locknut No.:HM 30/560; S:40.0 mm; |
| A18-80E1 External Gear Slewing Rings(91.199*69.5*7inch) For Tunnel Boring Machines | d:60 mm; B1:77,7 mm; S:30.9 mm; Thread (G):M6x1; D2:84,2 mm; J2:130 mm; s1:53.2 mm; A1:42 mm; L5:32 mm; N2:64 mm; |
| S16-112E1 Single Row Vertical Thrust Slewing Bearings(119.8*106*4.62inch) For Stationary And Mobile Cranes | L:80 mm; Brand:KOYO; Width (mm):60.5; Bearing number:SESDM40 AJ; W:2.1 mm; B:60.5 mm; Outer Diameter (mm):60; Bore Diameter (mm):40; h:3 mm; Basic dynamic load rating (C):2 160 kN; |
| RKS.062.20.0644 Four Point Contact Slewing Bearings(716*546*56mm) With Internal Gear For Construction And Industry Machines | Weight:29,5 Kg; Outer Diameter (mm):260; Brand:ISB; Basic dynamic load rating (C):948,64 kN; Width (mm):119; Bore Diameter (mm):120; (Grease) Lubrication Speed:2340 r/min; Size (mm):120x260x119; Bearing number:30324J/DFC600; Basic static load rating (C0):1372 kN; |
| HT10-54N1Z Internal Gear Slewing Ring Bearings (60*48.16*3.5inch) For Industrial Turntable | Outer Diameter (mm):161,925; d:76,2 mm; Bearing number:755/752; C:38,1 mm; Brand:ISO; B:48,26 mm; Bore Diameter (mm):76,2; Size (mm):76.2x161.925x47.625; T:47,625 mm; a:5,3 mm; |
| 1797/3760G Slewing Bearing 3760x4220x240mm | Outer Diameter (mm):190; Cr:39000 N / Dynamic lo; Brand:FAG; d:140 mm; Bore Diameter (mm):140; Width (mm):24; a:50 mm; da:155 mm / Tolerance:; ra max:0,6 mm; Bearing number:HSS71928-E-T-P4S; |
| High Quality VI 502540N Slewing Bearing 2286*2700*118mm | Bore Diameter (mm):90; Size (mm):90x190x46.5; Brand:Fersa; D:190 mm; Width (mm):46,5; Bearing number:31318F; d:90 mm; Outer Diameter (mm):190; |
| CRBS508 Crossed Roller Bearing 50X66X8mm | B:52 mm; Basic dynamic load rating (C):490 kN; Bore Diameter (mm):180; Fw:218 mm; (Grease) Lubrication Speed:1700 r/min; Size (mm):180x320x52; D:320 mm; Brand:NACHI; Bearing number:NU 236; r min.:4 mm; |
| CRBS708 Crossed Roller Bearing 70X86X8mm | Dynamic Load Rating (Cr):4,400,000; Max. shaft corner radius, or 45 deg. chamfer (ch1):1.100; Bore Dia (d):320.0000; Static Load Rating (Cor):22,000,000; Mis-alignment Angle (a deg.):4; Inner Width (Bi):160.0000; Outer Dia (D):440.0000; Outer Diameter (mm):440; Max. housing corner radius, or 45 deg. chamfer (ch):3.000; Bearing number:GEC320XS; |
| 2N-AT32406-2H Slewing Bearing With Outer Gear 1620x1988x138mm | Basic dynamic load rating (C):12,8 kN; J:97 mm; Expansion / Non-expansion:Non-expansion; Noun:Bearing; Bolt Spacing Maximum:4.134 Inch | 105Mill; Bearing number:PASE20-N-FA125; A:32 mm; Number of Mounting Holes:2; B1:31 mm; |
| VA160302-N Slewing Ring Bearing(384*238*32mm)for Handling Manipulator | Outer Dia (D):120.0000; Bore Dia (d):55.0000; Width (mm):29; Bore Diameter (mm):55; Standard Clearance:C0; Dynamic Load Rating (Cr):134,800; Size (mm):55x120x29; Max. Shaft Shoulder Dia. Inner (Li):70.5; Width (B):29.0000; Material:52100 Chrome steel,; |
| VU130225 Bearing 200*290*24mm | Mass bearing:2.7 kg; D4:182.9 mm; D2 ≈:151.3 mm; ra max.:2 mm; Outer Diameter (mm):95; Bearing number:219 NR; ba - min.:4 mm; D:170 mm; Db min.:185 mm; da - min.:107 mm; |
| DH80GO Excavator DAEWOO Double Row Sleiwng Bearing 901*640*82mm | da (min):47 mm; Configuration:Single Row; d:45 mm; D:58 mm; Bore Type:Cylindrical Bore; Weight:0.040 kg; B:7 mm; Dynamic Load Rating:5,350 N; Static Load Rating:4,900 N; ra (max):0.3 mm; |
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
I.1100.22.00.A-T Internal Gear Slewing Ring Bearing(1095*924*82mm) For Excavator And Crane Video