| CRBC7013UU Crossed Roller Bearing | Bearing number:CRO-5215; Outer Diameter (mm):400; d:260 mm; D:400 mm; Brand:NTN; Bore Diameter (mm):260; T:255 mm; Size (mm):260x400x255; Width (mm):255; |
| 2787/1525G2 Slewing Bearing 1525x1875x140mm | Center Guidance:Fixed Inner Ring Rib; Static Load Rating:4,750,000 N; Groove Width A:32 mm; Axial Load Factor Y0:1.99; Weight:187.000 kg; d:260 mm; Enclosure:Open; Dynamic Load Rating:4,350,000 N; Bore Type:Tapered Bore; B:165 mm; |
| 506DBS201y Four-point Contact Ball Slewing Bearing With External Gear | Designation Ruville:7900; Designation FAG:713616010; Designation SKF:VKBA 1926; Designation SNR:R179.00; Brand:CX; Compatibility:DAIHATSU / CHARADE; Bearing number:CX256; |
| RKS.162.20.1904 Crossed Roller Slewing Bearings(2012*1729*68mm) With Internal Gear For Industrial Robot | Housing Bore Dia. (Dh) - 125 +0.040 / -0:125 +0.040 / 0; Brand:AST; OD Chamfer Length (Co):1.800; ID Chamfer Angle (B deg.):45; Shaft Size (ds) - 120 +0 / -0.054:120 +0 / 0.054; Bearing Bore after Mounting (di):120.24 / 120.08; Material:Copper plated steel; Lube Hole Dia. (dl):9.500; Bearing Length, Nominal (B):60.000; Wall Thickness (S3):2.430; |
| RB12016 XRB12016 Cross Roller Bearing Size 120x150x16 Mm RB 12016 XRB 12016 | Flange Dia. (Dfl pm 0.5):235.000; Flange Radius (rfl):2.000; Wall Thickness (S3):2.500; Flange Thickness (Sfl):2.500; Bearing Outside Diameter, Nominal(Do):205.000; Bearing Bore after Mounting (di) - 205 +0.115 / -0:205 +0.115 / 0; Brand:AST; Bearing Type:flanged; Material:Wrapped bronze with; ID Chamfer Angle (B deg.):45; |
| 585DBS102y Four-point Contact Ball Slewing Bearing With Innter Gear | Bearing number:23068-K-MB-W33; Size (mm):340x520x133; Calculation factor (Y1):2,7; D:520 mm; Limiting speed:1300 r/min; B:133 mm; Brand:NKE; d:340 mm; r2 min.:5 mm; Calculation factor (Y0):2,6; |
| 9E-1Z30-0823-37 Crossed Roller Slewing Rings 715/976/100mm | B:32,5 mm; Size (mm):40x85x33.04; Width (mm):33,04; Brand:ISO; D:85 mm; T:33,04 mm; a:10,2 mm; d:40 mm; Bore Diameter (mm):40; Bearing number:JF4049/10; |
| Crossed Roller Slewing Bearing RKS.160.16.1754 | Y - ISO Factor9:1.35; C0 - Static Radial Rating:48600 lbf; e - ISO Factor8:0.44; Cg - Geometry Factor11:0.125; db - Cone Backface Backing Diameter:3.86 in; Aa - Cage-Cone Backface Clearance:0.07 in; D:5.3750 in; Bearing Weight:3.6 lb; da - Cone Frontface Backing Diameter:3.58 in; Design Units:Imperial; |
| 1620DBS201t Four-point Contact Ball Slewing Bearing With External Gear | Rα:45 °; Housing:SYWR 505 Y; B:34.1 mm; RG:1/4-28 UNF; H2:16 mm; H:70 mm; Bearing number:SYWR 25 YTHR; Basic dynamic load rating C:11.9 kN; H1:36.5 mm; |
| VSA250755-N Slewing Ring Bearing(898*655*80mm)for Stacking Robot | B:1,8 mm; Brand:ISO; C:1,8 mm; d:2,5 mm; Bearing number:682X; Width (mm):1,8; Outer Diameter (mm):6; D:6 mm; r min.:0,08 mm; Bore Diameter (mm):2,5; |
| CAT345B Excavator CATERPILLAR Double Row Slewing Bearing 1680*1343*140mm | C:38 mm; Width (mm):38; Weight:4,9 Kg; Bore Diameter (mm):110; r3 min.:2,1 mm; Basic static load rating (C0):368 kN; r2 min.:2,1 mm; Bearing number:NUP222-E-MPA; Outer Diameter (mm):200; F:132,5 mm; |
| 16344001 External Gear Slewing Ring Bearings (63.15*47.84*5.118inch) For Wind Turbines | D:72 mm; Width (mm):21,5; Bore Diameter (mm):35; Bearing number:RW207CCR; C:21,5 mm; Outer Diameter (mm):72; Brand:PFI; d:35 mm; Size (mm):35x72x21.5; B:21,5 mm; |
| Supply VI 603280N Slewing Bearing 3006*3455*136mm | B:15,875 mm; Bore Diameter (mm):12,7; Bearing number:MJ1/2-2Z; D:41,275 mm; Basic static load rating (C0):5,1 kN; Brand:RHP; Basic dynamic load rating (C):12,1 kN; Weight:0,096 Kg; d:12,7 mm; C:15,875 mm; |
| 01 0235 00 Slewing Ring Bearing | Note:This product line wa; Shaft Size:1.75 in; Bearing Type:Split Cylindrical Ex; Dimension H:3.0 in; Support Type:Hanger Block; Seal Type1:High Temperature Pac; Dimension X (Thread):1 - 8 UNC; Bearing Number:LSE112BX; Cr - Dynamic Load Rating:18659 lbf; Cor - Static Load Rating:19558 lbf; |
| R9-67N3 Outer Gear Cross Roller Slewing Ring Bearings(72.2*59.086*3.15inch) For Radar Antennas | Dynamic Load Rating:213,000 N; Hole Diameter (do):3 mm; d:65 mm; ra (max):1.5 mm; D:120 mm; Roller Profile:Asymmetric; Axial Load Factor Y0:2.21; Limiting Speed - Grease:5,700 rpm; Center Guidance:Fixed Inner Ring Rib; Axial Load Factor Y1:2.26; |
| 9E-1Z25-0576-1322 Crossed Roller Slewing Bearing With External Gear 468/695/78mm | Size (mm):300x460x74; C:74 mm; Brand:ISO; Outer Diameter (mm):460; B:74 mm; Bore Diameter (mm):300; D:460 mm; Bearing number:NUP1060; d:300 mm; Width (mm):74; |