| No. | Brand | b | B | e | f | m | s | Q | X |
| PC60 | - | - | - | - | - | - | - | - | - |
| Q235 | - | - | - | - | - | - | - | - | - |
| E0 | - | - | - | 0,83 | - | - | - | - | - |
| ACQ50 | - | - | - | - | - | - | - | - | - |
| MSA-06-X-30 | YUKEN | - | 63,000 mm | - | - | - | - | - | - |
| A10V43 | Rexroth | - | 48,26 mm | - | - | - | - | - | - |
| 20238-MB | - | - | - | - | - | - | - | - | - |
| stove(XF-8571-A) | - | - | 170 mm | - | - | - | - | - | - |
| 6208RS | - | - | 292,1 mm | - | - | - | - | - | - |
| 6415 | fag | - | 10 mm | - | - | - | - | - | - |
| 1311EKTN9 | SKF | - | - | - | - | - | - | - | - |
| PV016R1K8T1NMMC | Parker | - | - | - | - | - | - | - | - |
| 307 | INA | - | - | - | - | - | - | - | - |
| 6001-2RSH/C3 | - | - | - | - | - | - | - | - | - |
| PC138US-8 | - | - | - | - | - | - | - | - | - |
| 608 | - | - | - | - | - | - | - | - | - |
| 336D | - | - | 180,000 mm | - | - | - | - | - | - |
| 6208-2RS | - | - | - | - | - | - | - | - | - |
| [Jz-RS116] | - | - | - | - | - | - | - | - | - |
| 3 | - | - | 16,5 mm | - | - | - | - | - | - |
| 2W8001Excavator | - | - | - | - | - | - | - | - | - |
| #NK55/35, | INA | - | - | - | - | - | - | - | - |
| 12mm-18mm | - | - | - | - | - | - | - | - | - |
| Nh4cl | INA | - | - | 0,23 | - | - | - | - | - |
| hyk2068 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | 16 mm | - | - | - | - | - | - |
| 4X8 | - | - | - | - | - | - | - | - | - |
| 50% | - | - | - | - | - | - | - | - | 4,1 mm |
| 510020 | Timken | - | - | - | - | - | - | - | - |
| I.700.22.00.A Internal Gear Slewing Rotary Bearing(699*530*82mm) For Filling Machine | da min:144 mm; Bore Diameter (mm):125; d2G:M140X2; nB:2550 1/min / Referen; rmin:3 mm; Size (mm):125x230x64; C0r:890000 N / Static lo; Y2:3,9; l:78 mm; Cr:760000 N; |
| AT14316 Slewing Bearing With Outer Gear 715x976x98mm | Characteristic rolling element frequency, BSF:4.05 Hz; Nlim:15,000 rpm; Bearing number:6202E; da min:19 mm; d:15,000 mm; da max:19.7 mm; Da max:31 mm; D:35,000 mm; B:11,000 mm; d1:19.7 mm; |
| Cross Roller Bearing RB14016UUCC0P5 | Bearing number:624-Z; Size (mm):4x13x5; Bore Diameter (mm):4; Brand:ISB; d:4 mm; B:5 mm; Weight:0,0031 Kg; D:13 mm; Basic static load rating (C0):0,29 kN; Width (mm):5; |
| 06 1116 00 Slewing Ring Bearing | Bore Diameter (mm):110,000; Brand:SNR; D:200,000 mm; B:38,000 mm; d:110,000 mm; Size (mm):110x200x38; Outer Diameter (mm):200,000; Width (mm):38,000; C:38,000 mm; Bearing number:7222BGM; |
| 0685XRN091 Precision Cross Taper Roller Bearing | G2 - Heat Generation Factor (Rib-Roller End):8.8; db - Cone Backface Backing Diameter:34.04 mm; r - Cup Backface To Clear Radius2:0.76 mm; Bearing Weight:0.9 Kg; D:76.2 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:5520 lbf; Db - Cup Backface Backing Diameter:65.02 mm; C - Cup Width:23.813 mm; Ab - Cage-Cone Frontface Clearance:1.5 mm; C0 - Static Radial Rating:22800 lbf; |
| Cheaper Price XI 402026N Cross Roller Bearing 1764*2184*122mm | Outer Diameter (mm):51,35; B:13,8 mm; Brand:SNR; Width (mm):13,2; D:51,35 mm; Size (mm):25x51.35x13.2; Bore Diameter (mm):25; Bearing number:EC42310S01H200; d:25 mm; T:13,2 mm; |
| XD.10.0580 Crossed Roller Bearing | da - Cone Frontface Backing Diameter:170.94 mm; Series:107000; B - Cone Width:74.613 mm; a - Effective Center Location3:-15 mm; Cg - Geometry Factor:0.116; Cone Part Number:EE107060V; Db - Cup Backface Backing Diameter:236.98 mm; G2 - Heat Generation Factor (Rib-Roller End):76.3; C0 - Static Radial Rating:263000 lbf; C90 - Dynamic Radial Rating (90 million revolutions)4:54200 lbf; |
| MTE-265 External Gear Slewing Ring Bearings (17.086*10.433*1.968inch) For Truck-mounted Cranes | Bearing number:85BIH391; Basic dynamic load rating (C):224 kN; d:215,9 mm; D:292,1 mm; Width (mm):38,1; Weight:8,2 Kg; Bore Diameter (mm):215,9; Outer Diameter (mm):292,1; Brand:Timken; C:38,1 mm; |
| 12-502000/2-06510 Slewing Bearing With Internal Gear 1764/2171/109mm | Minimum Buy Quantity:N/A; d:55 mm; Maximum Capacity / Filling Slot:No; Snap Ring:No; Basic dynamic load rating (C):28,3 kN; Internal Special Features:No; ra max.:1.0 mm; Outside Diameter:3.543 Inch | 90 Mill; Enclosure Type:Contact Seal; Cage Material:Steel; |
| 133.45.2000 Slewing Bearing 1779x2221x231mm | Brand:KOYO; N:35 mm; d:88,9 mm; H3:240 mm; A4:56 mm; Weight:21,3 Kg; B:96 mm; A1:30 mm; J:216 mm; A3:20 mm; |
| 16376001 Internal Gear Slewing Ring Bearings (54.53*41.76*4.72inch) For Stackers And Reclaimers | d:70 mm; Basic static load rating (C0):157,9 kN; B:30 mm; Outer Diameter (mm):100; D:100 mm; F:80 mm; Weight:0,765 Kg; r min.:1 mm; da min.:75 mm; Da max.:95 mm; |
| VSI200944-N Slewing Ring Bearing(1016*840*56mm)for Manipulator | T:79,375 mm; R:3,5 mm; Brand:Timken; Size (mm):49.212x111.125x79.37; Width (mm):79,375; r:1,5 mm; d:49,212 mm; Outer Diameter (mm):111,125; Bearing number:545/533D; D:111,125 mm; |
| RKS.162.20.1904 Crossed Roller Slewing Bearings(2012*1729*68mm) With Internal Gear For Industrial Robot | Housing Bore Dia. (Dh) - 125 +0.040 / -0:125 +0.040 / 0; Brand:AST; OD Chamfer Length (Co):1.800; ID Chamfer Angle (B deg.):45; Shaft Size (ds) - 120 +0 / -0.054:120 +0 / 0.054; Bearing Bore after Mounting (di):120.24 / 120.08; Material:Copper plated steel; Lube Hole Dia. (dl):9.500; Bearing Length, Nominal (B):60.000; Wall Thickness (S3):2.430; |
| VU250380 Slewing Ring Bearing(485*275*55mm)for Filling Machine | (Oil) Lubrication Speed:11000 r/min; (Grease) Lubrication Speed:8500 r/min; Brand:NACHI; Calculation factor (e):0.27; Basic static load rating (C0):37500 kN; Width (mm):21.539; T:23.020 mm; Outer Diameter (mm):49.225; B:21.539 mm; Weight:0,195 Kg; |
| R110-7 Excavator HYUNDAI Double Row Slewing Bearing 1095*863*80mm | B:114,3 mm; r max:3 mm; Bearing number:140RJ93; D:300 mm; C:114,3 mm; Bore Diameter (mm):140; Outer Diameter (mm):271; F:168 mm; E:271 mm; d:140 mm; |
| XRB3510 RB3510 Cross Roller Bearing Size 35x60x10 Mm XRB 3510 RB 3510 | d1:59.75 mm; Basic dynamic load rating - C:22.9 kN; Basic static load rating C0:15.6 kN; Calculation factor - f0:15; Fatigue load limit Pu:0.71 kN; d:50 mm; Width (mm):16; Calculation factor f0:14.7; Fatigue load limit - Pu:0.71 kN; r1,2 min.:1 mm; |
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
I.955.25.00.B Internal Gear Slewing Bearing(955*710*80mm) For Concrete Pump And Fire Ladder Video