| No. | Brand | b | B | e | f | m | s | Q | X |
| 62AX188, | Timken | - | 36 mm | - | - | - | - | - | - |
| Ip65 | - | - | - | - | - | - | - | - | - |
| 22210CCKW33 | SKF | - | - | - | - | - | - | - | - |
| HK1212 | - | - | - | - | - | - | - | - | - |
| PC400-6C | INA | - | - | - | - | - | - | - | - |
| YAR205-2F | - | - | 140 mm | - | - | - | - | - | - |
| 6203Z | - | - | 63,5 mm | - | - | - | - | - | - |
| 2016 | - | - | 21,839 mm | - | - | - | - | - | - |
| 516005 | Timken | - | 0.9375 in | - | - | - | - | - | - |
| 6308Z | NSK | - | 24,5 mm | - | - | - | - | - | - |
| 25S | - | - | 17 mm | - | - | - | - | - | - |
| 5 | - | - | 49 mm | - | - | - | - | - | - |
| 360 | - | - | - | - | - | - | - | - | - |
| 35X72X23X19 | - | - | 46 mm | - | - | - | - | - | - |
| ZX650 | - | - | - | - | - | - | - | - | - |
| 100x180x46 | INA | - | 33 mm | - | - | - | - | - | - |
| 1200X1200mm | - | - | 44,45 mm | - | - | - | - | - | - |
| O3 | - | - | 20 mm | - | - | - | - | - | - |
| OSB3 | INA | - | - | - | - | - | - | - | - |
| 65.26201-7073c | - | - | 29 mm | - | - | - | - | - | - |
| MCR05 | - | - | - | - | - | - | - | - | - |
| 1-30mm | - | - | 56 mm | - | - | - | - | - | - |
| 9mm/12mm | - | - | - | - | - | - | - | - | - |
| 09262-35032-000 | - | - | - | - | - | - | - | - | - |
| 1797/2100G2 Slewing Bearing 2100x2700x180mm | T:30,162 mm; r3 min.:3,3 mm; Outer Diameter (mm):117,475; ra max.:3,5 mm; Db min.:112 mm; Limiting speed:5 600 r/min; Size (mm):73.025x117.475x30.16; Ca min.:4 mm; Cb min.:6 mm; Basic dynamic load rating (C):124 kN; |
| HT10-60E1Z External Gear Slewing Ring Bearings (65.84*54*3.5inch) For Jib Cranes | Characteristic outer ring frequency, BPF0:8.71 Hz; Size (mm):80x140x33; Static load, C0:19.9 kN; Y0:2.61; Dynamic load, C:48.5 kN; Nlim:5,900 rpm; rs min:2 mm; B:33,000 mm; Width (mm):33,000; Y1:2.49; |
| RKS.221310101001 Crossed Roller Slewing Bearings(864*668*82mm) With External Gear Teeth For Textile Machine | Size (mm):3x7x3; C:3 mm; Bearing number:683-2TS; D:7 mm; Bore Diameter (mm):3; Outer Diameter (mm):7; d:3 mm; B:3 mm; Brand:ZEN; Basic dynamic load rating (C):0,311 kN; |
| High Quality XIU25/1077 Cross Roller Bearing 920*1179*73mm | Thread (G):M24x2; d:25 mm; B:31 mm; M:22 mm; Brand:CRAFT; G:58 mm; o:29,6 mm; L:124 mm; Bore Diameter (mm):25; Bearing number:SAL25T/K; |
| RKS.061.20.0944 Four Point Contact Slewing Bearings(1046*872*56mm) With External Gear Teeth For Steel Plant | Bore Diameter (mm):2; Size (mm):2x6x2.5; d:2 mm; Bearing number:MF62-2Z; Basic dynamic load rating (C):0,33 kN; D:6 mm; Brand:ZEN; C:2,5 mm; B:2,5 mm; Outer Diameter (mm):6; |
| L-shape Slewing Bearing RKS.21 0541 | Bearing number:23180E; d:400 mm; (Oil) Lubrication Speed:720 r/min; Calculation factor (Y0):2,13; Calculation factor (e):0,31; Bore Diameter (mm):400; D:650 mm; B:200 mm; Basic dynamic load rating (C):5750 kN; Brand:NACHI; |
| Good Performance XIU25/500Y Cross Roller Bearing 360*602*75m | Width (mm):7; B:7 mm; Bore Diameter (mm):17; Basic dynamic load rating (C):4,3 kN; Size (mm):17x30x7; d:17 mm; Outer Diameter (mm):30; D:30 mm; C:7 mm; Bearing number:6903-Z; |
| 9E-1Z20-0730-0913 Precise Crossed Roller Slewing Bearing With External Gear 634/846/75mm | Cr - Dynamic Load Rating:31024 lbf; Dimension L:315 mm; Bearing UPC:013992030399; Housing Width:4.4 in; Note:This product line wa; Dimension H:95 mm; Maximum Speed:3310 rpm; Dimension H2:208 mm; Shaft Size:70 mm; Seal Type:Felt Type; |
| 1798/1100G2K Slewing Bearing 1100x1400x145mm | r - Outer Ring To Clear Radius2:1.5 mm; UPC Code:087796023123; Cage Material:Steel; Y1 - ISO Factor5:4.15; C1(2) - Dynamic Radial Rating (Two-Rows):206000 N; Da - Outer Ring Backing Diameter:109.000 mm; Cg - Geometry Factor8:0.0511; Reference Thermal Speed Rating (Oil)7:5100; B - Outer Ring Width:31 mm; Y2 - ISO Factor6:2.73; |
| A18-89E1 External Gear Slewing Rings(99.8*78.38*6.62inch) For Tunnel Boring Machines | X:14 mm; Bearing number:RN2207-E-MPBX; Weight:0,27 Kg; Basic dynamic load rating (C):72 kN; Outer Diameter (mm):64; Basic static load rating (C0):65,5 kN; d1:48 mm; Bore Diameter (mm):35; Size (mm):35x64x23; r min.:1,1 mm; |
| SSM1790/50CHH Slewing Bearing For 58M Pump Truck | B:81 mm; A:58,7 mm; K:7,1 mm; Bearing number:RRTY16; Brand:NKE; M:63,5 mm; L:27,4 mm; T:7 mm; U:17,9 mm; V:48 mm; |
| STN0935/25CWH Slewing Bearing For EBZ160 Boring Machine | K - Factor7:1.24; G2 - Heat Generation Factor (Rib-Roller End):253; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:51800 lbf; Ab - Cage-Cone Frontface Clearance:0.21 in; C1 - Dynamic Radial Rating (1 million revolutions)1:247000 lbf; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:64000 lbf; G1 - Heat Generation Factor (Roller-Raceway)8:1840; da - Cone Frontface Backing Diameter:12.91 in; |
| 1080DBS113y Four-point Contact Ball Slewing Bearing With Innter Gear | D:62 mm; C:22 mm; Size (mm):40x62x22; Basic static load rating (C0):63,65 kN; Weight:0,23 Kg; d:40 mm; Width (mm):22; Brand:NBS; Bore Diameter (mm):40; Bearing number:NA 4908; |
| RU85 Crossed Roller Bearing 55x120x15mm | C:47,625 mm; T:66,675 mm; Bore Diameter (mm):977,9; Basic dynamic load rating (C):1430 kN; (Grease) Lubrication Speed:170 r/min; Basic static load rating (C0):4300 kN; B:63,5 mm; Weight:101 Kg; Width (mm):66,675; Brand:ISB; |
| RE15013UUC0 High Precision Cross Roller Ring Bearing | Pre Install Clearance Min:0.0016 in; Engineering Group:Mounted Bearing; Dimension L Fix:3.27 in; Shaft Size :2-3/16 in; e - Geometry Factor:0.25; Oil Lubrication - M/N Seal:2200 rpm; Dimension M:2 in; Housing Style:Four-Bolt Square Fla; Weight:14 lb; Dimension H:1.00 in; |
| L9-53P9Z No Gear Slewing Ring Bearing(59.06*47.44*3.54inch) For Stackers | Brand:Timken; R:2,5 mm; D:140 mm; r:2 mm; Size (mm):85x140x41; Dynamic load rating radial (C):254 kN; Calculation factor (e):0,41; Bore Diameter (mm):85; C:32 mm; Bearing number:33117; |
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
I.616.20.00.B Internal Gear Flange Slewing Bearing(616*444*56mm) For Excavator And Loader Video