No. | Brand | b | B | e | f | m | s | Q | X |
46% | - | - | - | - | - | - | - | - | - |
17mm | - | - | 17 mm | - | - | - | - | - | - |
BF-083S | Parker | - | 155 mm | - | - | - | - | - | - |
2003-2007 | - | - | - | - | - | - | - | - | - |
18mm | - | - | - | - | - | - | - | - | - |
1115030 | - | - | - | - | - | - | - | - | - |
(5pcs) | - | - | 17,3 mm | - | - | - | - | - | - |
NUP2320 | NSK | - | 8 mm | - | - | - | - | - | - |
FJ1200 | - | - | 17 mm | - | - | - | - | - | - |
Adk83009 | - | 0,95 mm | - | - | - | - | - | - | - |
NY-QM4038 | - | - | 38 mm | - | - | - | - | - | - |
6201-2Z | SKF | - | - | - | - | - | - | - | - |
6202 | - | - | 35 mm | - | - | - | - | - | - |
10 | - | - | - | - | - | - | - | - | - |
3mm | - | - | 15,875 mm | - | - | - | - | - | - |
2W8001Excavator | - | - | - | - | - | - | - | - | - |
99.5% | - | - | 21,996 mm | - | - | - | - | - | - |
2003 | NTN | - | - | - | - | - | - | - | - |
100% | - | - | - | - | - | - | - | - | - |
25 | - | - | - | - | - | - | - | - | - |
30-9-9 | - | - | 38 mm | 0,43 | - | - | - | - | - |
19mm | - | - | 33 mm | - | - | - | - | - | - |
27ft | INA | - | - | - | - | - | - | - | - |
23936EMB | - | - | 67 mm | - | - | - | - | - | - |
NU2313ECP/C3 | - | - | - | - | - | - | - | - | - |
G22 | - | 30 mm | - | - | - | - | - | - | - |
5000PSI | Parker | - | - | - | - | - | - | - | - |
C3009g | - | - | - | - | - | - | - | - | - |
M5X0.8 | - | - | - | - | - | - | - | - | - |
7019R | - | - | - | - | - | 10,8 kg / Weight | - | - | - |
30 mm x 72 mm x 27 mm MTO-170 No Gear Slewing Ring Bearings (12.205*6.693*1.811inch) For Work Positioners | r min.:0,3 mm; Width (mm):25; Weight:0,115 Kg; d:20 mm; D:37 mm; Da max.:35 mm; Size (mm):30 mm x 72 mm x 27 mm ; C:23 mm; Bearing number:NATB 5904; Static load rating axial (C0):6,11 kN; |
33 0741 01 Light Series Solid Section No Gear Slewing Ring Bearing(816*672*56mm)for Stacker Crane | Tensioning Unit Type:Push Type; Support Type:Take-Up; Dimension S:3.4 in; Dimension P:1.0 in; Cor - Static Load Rating:157366 lbf; Dimension B:10.5 in; Bearing UPC:013992039347; Shaft Size:4.75 in; Dimension N:18.3 in; Dimension Y:0.9 in; |
1788/1040G2 Slewing Bearing 1040x1314x80mm | Width (mm):12; D:37 mm; C:12 mm; Bore Size:12 mm; Groove Diameter:34.8 mm; Brand:NACHI; Limiting Speed - Oil:24,000 rpm; a:2.06 mm; Basic static load rating (C0):4,25 kN; r min.:1 mm; |
Cross Roller Bearing RB8016UUCC0P5 | B:34 mm; Width (mm):122; ra - max.:4 mm; d:1120 mm; Reference speed:130 r/min; D1:1125 mm; da min.:1274 mm; r1,2 - min.:5 mm; d1:1315 mm; Basic static load rating - C0:36500 kN; |
90-201091/0-07072 Four-point Contact Ball Slewing Bearing 984x1198x56mm | Outer Diameter (mm):300; Weight:4,35 Kg; Bearing number:7848B; Width (mm):28; d:240 mm; a:127,3 mm; da:260 mm; D:300 mm; Bore Diameter (mm):240; r min.:2 mm; |
RKS.061.20.0944 Bearing | Float:0.083 in; Dimension L Fix:3.68 in; Dimension C:4.290 in; Dimension BC:7.50 in; Shaft Tolerance:0.0020 in; C - Dynamic Load (Basic):49900 lb; Eng Internal Radial Clearance - Max:0.0031; Dimension B Fix:1.81 in; Dimension E:5.30 in; Engineering Group:Mounted Bearing; |
A6-11P5 No Gear Slewing Bearings(14.68*8.26*1.57inch) For Clarifiers And Thickeners | Bearing number:389AS/382; Outer Diameter (mm):98,425; D:98,425 mm; Bore Diameter (mm):53,975; d:53,975 mm; Size (mm):53.975x98.425x21; Brand:Fersa; Width (mm):21; |
EX870 Excavator HITACHI Double Row Slewing Bearing 2037*1595*160mm | B:36 mm; Bearing number:22309YM; Width (mm):36; da:58 mm; Outer Diameter (mm):100; Bore Diameter (mm):45; Da:90 mm; D:100 mm; d:45 mm; Size (mm):45x100x36; |
NRXT8013DD Crossed Roller Bearing 80X110X13mm | Brand:ISO; Width (mm):38; D:400 mm; Outer Diameter (mm):400; Bore Diameter (mm):320; Bearing number:61864; Size (mm):320x400x38; C:38 mm; d:320 mm; B:38 mm; |
06 0675 00 Slewing Ring Bearing | d2:14 mm; Weight:0,067 Kg; Angle:25 °; r min.:0,3 mm; l2 max.:14,2 mm; l3 min.:34,2 mm; l1 min.:15 mm; Brand:LS; L:49 mm; D:26 mm; |
32 0411 01 Light Series Solid Section Internal Gear Slewing Ring Bearing(486*325*56mm)for Packaging Systems | Width (mm):35; Width (B):35.0000; Bore Diameter (mm):150; Dynamic Load Rating (Cr):159,100; Radius (min) (rs):2.100; Bearing Type:25 deg contact angle; Size (mm):150x225x35; Radius (min) (rs1):1.100; Max Speed (Grease) (X1000 RPM):5; Bore Dia (d):150.0000; |
0685XRN091 Crossed Roller Bearing | Dynamic Load Rating:139,000 N; db (min):67 mm; r1:2.1 mm; D:140 mm; Fillet Radius/Chamfer:2.1 mm; db (max):76 mm; Limiting Speed - Oil:5,600 rpm; Da (max):128 mm; Inside Ring Outside Diameter:77.2 mm; Limiting Speed - Grease:4,800 rpm; |
9O-1Z30-0980-16-8 Crossed Roller Slewing Rings 868/1095/100mm | Bore Diameter (mm):30; Fatigue load limit - Pu:0.1 kN; Calculation factor kr:0.035; Fatigue load limit Pu:0.1 kN; da min.:13 mm; B:10 mm; ra max.:0.6 mm; D:30 mm; Da - max.:26 mm; D2:25.28 mm; |
CRBS1208 Crossed Roller Bearing 120X136X8mm | ra max.:1,5 mm; Bearing number:6019ZX; Size (mm):95x145x24; (Oil) Lubrication Speed:5200 r/min; D:145 mm; Basic static load rating (C0):53,9 kN; B:24 mm; d:95 mm; Brand:KOYO; Width (mm):24; |
1799/1070 Slewing Bearing 1070x1416x115mm | Size (mm):280x500x130; Calculation factor (e):0,28; Bore Diameter (mm):280; Basic dynamic load rating (C):2010 kN; Bearing number:22256-MB-W33; Outer Diameter (mm):500; Limiting speed:1500 r/min; Width (mm):130; d:280 mm; Calculation factor (Y1):2,4; |
RB15013 XRB15013 Cross Roller Bearing Size 150x180x13 Mm RB 15013 XRB 15013 | Bearing number:HR100KBE42+L; Weight:8,7 Kg; rb max.:1 mm; Calculation factor (e):0,42; (Grease) Lubrication Speed:1600 r/min; (Oil) Lubrication Speed:2200 r/min; ra max.:2,5 mm; Calculation factor (Y2):2,4; Bore Diameter (mm):100; Brand:NSK; |
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
3R10-117N3D Internal Gear Heavy Duty Slewing Ring(125.62*106.333*8.38inch) For Climbing Cranes And Tower Cranes Video