| No. | Brand | b | B | e | f | m | s | Q | X |
| 1220*2440 | - | - | - | - | - | - | - | - | - |
| 2x | TRW | - | - | - | - | - | - | - | - |
| 18mm | - | - | 16 mm | - | - | - | - | - | - |
| (LCT3003) | - | - | - | - | - | - | - | - | - |
| (2 | - | - | - | - | - | - | - | - | - |
| (50 | - | - | - | - | - | - | - | - | - |
| 18758 | - | - | 30,391 mm | - | - | - | - | - | - |
| 6016N | fag | - | - | - | - | - | - | - | - |
| 50x80x16 | - | - | 56 mm | - | - | - | - | - | - |
| 1220*2440mm | - | - | - | - | - | - | - | - | - |
| RG500 | - | - | - | - | - | - | - | - | - |
| Nn3020mbkr | - | - | 33,338 mm | - | - | - | - | - | - |
| 200 | - | - | - | - | - | - | - | - | - |
| 5-4we | Rexroth | - | - | - | - | - | - | - | - |
| 15mm | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | 165 mm | - | - | - | - | - | - |
| #R978017748 | Rexroth | - | - | 22 mm | - | - | - | - | - |
| PV24 | - | - | - | - | - | - | - | - | - |
| #C800B | Parker | - | - | - | - | - | - | - | - |
| R901221950 | Rexroth | - | - | - | - | - | - | - | - |
| 27pcs | - | - | - | - | - | - | - | - | - |
| 440V | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 1930 | - | - | 81 mm | - | - | - | - | - | - |
| NJ2320 | - | - | - | - | - | - | - | - | - |
| 23148-c3 | - | - | - | - | - | - | - | - | - |
| PC450-8 | - | - | - | - | - | - | - | - | - |
| 481416 | Parker | - | - | - | - | - | - | - | - |
| CAT312C Excavator Double Row Slewing Bearing 1093*882.5*72.5mm | da:107 mm; a (max):5.7 mm; Enclosure:Open; Limiting Speed - Grease:2,600 rpm; Cy:8.4 mm; D:170 mm; Limiting Speed - Oil:3,700 rpm; Dynamic Load Rating:149,000 N; Configuration:Double Row; B:55.6 mm; |
| High Quality VSI 200844N Slewing Bearing 736*916*56mm | Outer Diameter (mm):47; H1:29,5 mm; Static load rating radial (C0):18,9 kN; D:47 mm; H:43 mm; Bore Diameter (mm):17; C:16 mm; Dynamic load rating axial (C):24,7 kN; Width (mm):16; B:9 mm; |
| DH300LC-7 Excavator DAEWOO Double Row Sleiwng Bearing 1475*1165*120mm | Thread (G):M10 Tolerance 6H; d4 max.:20 mm; B:14 mm; Brand:SKF; r1 min.:0,3 mm; dk:19 mm; l7 min.:14 mm; l5:6,5 mm; Bearing number:SILKAC10M; h1:43 mm; |
| 10-200841/0-02052 Four-point Contact Ball Slewing Bearing 772mmx916mmx56mm | d:65,000 mm; Bore Diameter (mm):65,000; da min:73 mm; Characteristic inner ring frequency, BPFI:10.3 Hz; Outer Diameter (mm):120,000; da max:79 mm; Brand:SNR; Y1:2.23; Y2:3.45; Characteristic cage frequency, FTF:0.43 Hz; |
| L9-42P9Z No Gear Slewing Ring Bearing(47.24*35.63*3.54inch) For Stackers | Weight / Kilogram:0.205; Inventory:0.0; Basic dynamic load rating C:20.3 kN; Internal Special Features:No; ra max.:1 mm; da - max.:40.3 mm; Fatigue load limit - Pu:0.475 kN; B:16 mm; r1,2 - min.:1 mm; |
| High Quality XI 503720N Cross Roller Bearing 3420*3910*138mm | Outer Diameter (mm):62; d:35 mm; Bore Diameter (mm):35; Weight:0,14 Kg; Angle (α):25 °; Brand:NTN; B:14 mm; Bearing number:5S-7007ADLLBG/GNP42; Size (mm):35x62x14; Width (mm):14; |
| CRB6013 NRXT6013 Cross Roller Bearing Size 60x90x13 Mm CRB 6013 NRXT 6013 | D:100 mm; Size (mm):70x100x16; Width (mm):16; Bore Diameter (mm):70; Outer Diameter (mm):100; C:16 mm; Bearing number:2LA-BNS914ADLLBG/GNP; d:70 mm; Brand:NTN; B:16 mm; |
| R9-59N3 Outer Gear Cross Roller Slewing Ring Bearings(64.33*51.7*3.15inch) For Radar Antennas | Bore Diameter (mm):10; Bearing number:6000-Z; r2 min.:0,3 mm; r1 min.:0,3 mm; Brand:NKE; Weight:0,019 Kg; C:8 mm; Width (mm):8; Basic dynamic load rating (C):4,6 kN; Size (mm):10x26x8; |
| 10-250555/0-04020 Four-point Contact Ball Slewing Bearing 455mmx655mmx63mm | Basic dynamic load rating (C):1,34 kN; Width (mm):5; d:6 mm; Outer Diameter (mm):15; Basic static load rating (C0):0,523 kN; Brand:ZEN; C:5 mm; Bearing number:SF696; (Grease) Lubrication Speed:40000 r/min; B:5 mm; |
| 9E-1B25-0422-0966 Slewing Bearing With External Gear 323.7x520.3x54mm | d:90,000 mm; B:43,000 mm; Brand:NTN; Width (mm):43,000; Bore Diameter (mm):90,000; Outer Diameter (mm):190,000; D:190,000 mm; Bearing number:N318E; C:43,000 mm; Size (mm):90x190x43; |
| VSI250855-N Slewing Ring Bearing(955*710*80mm)for Bending Robot | Width (mm):17; r1 min.:1,1 mm; Brand:NKE; Basic static load rating (C0):36,9 kN; D:62 mm; r2 min.:1,1 mm; r3 min.:1,1 mm; S:1,5 mm; r4 min.:1,1 mm; B:17 mm; |
| RKS.22.0641 L-shape Range Internal Gear Slewing Ring Bearing(748*546*56mm) For Bending Robot | Dynamic Load Rating:8130 lbf; Foot Height H1:19.1 mm; Total Height H2:101.6 mm; Center of Bearing from End S:19 mm; Bearing Type:Ball Bearing; Bolt Hole Width N:14.3 mm; Seal Type:Shroud Seal; Dimension L1:59.8 mm; Dimension B1:1.937 in; Series:Industrial; |
| CAT200B Excavator CATERPILLAR Double Row Slewing Bearing 1308*1082*100mm | H2:16 mm; J min.:100 mm; Basic dynamic load rating C:14 kN; J:105 mm; A5:18 mm; Basic dynamic load rating (C):14 kN; L:134 mm; Bearing number:SYK 25 TF; Category:Bearings; Brand:SKF; |
| VSU200544 Bearing 472*616*56mm | d:85 mm; D:120 mm; Basic static load rating (C0):84,5 kN; Brand:CYSD; Width (mm):18; (Grease) Lubrication Speed:6400 r/min; 2B:36 mm; Size (mm):85x120x18; B:18 mm; C:18 mm; |
| Wholesale XIU20/955 Cross Roller Bearing 810*1055*80mm | Width (mm):5; B:5 mm; d1:6,6 mm; D:13 mm; C:5 mm; Weight:0,0007 Kg; Brand:SKF; d:4 mm; Bearing number:624/HR22Q2; Basic dynamic load rating (C):0,04 kN; |
| 133.40.1800 Slewing Bearing 1605x1995x220mm | Bore Diameter (mm):299,975; R:6,4 mm; Brand:Timken; r:1,5 mm; Size (mm):299.975x495.3x301.62; Width (mm):301,625; D:495,3 mm; Bearing number:HH258248/HH258210CD+; d:299,975 mm; T:301,625 mm; |
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
3R10-88N2B Internal Gear Heavy Duty Slewing Ring(96*75.2*7inch) For Climbing Cranes And Tower Cranes Video