No. | Brand | b | B | e | f | m | s | Q | X |
HMV110 | - | - | - | - | - | - | - | - | - |
[12 | - | - | 25,4 mm | - | - | - | - | - | - |
1220*2440mm | - | - | - | - | - | - | - | - | - |
80X100X30-XL | INA | - | - | - | - | - | - | - | - |
6301 | NSK | - | 41,275 mm | - | - | - | - | - | - |
12mm | INA | - | - | - | - | - | - | - | - |
EC360 | - | - | 29 mm | - | - | - | - | - | - |
620 | NTN | - | 125,73 mm | - | - | - | - | - | - |
HPV091 | Hitachi | - | - | - | - | - | - | - | - |
N224 | NSK | - | - | - | - | - | - | - | - |
4T-LM48548 | NTN | - | - | - | - | - | - | - | - |
1500 | NTN | - | 86 mm | - | - | - | - | - | - |
5-87610018-0 | - | - | 36 mm | - | - | - | - | - | - |
6309DDU | - | - | 6 mm | - | - | - | - | - | - |
Hb05r | - | - | - | - | - | - | - | - | - |
Nh4cl | - | - | - | - | - | - | - | - | - |
4*8 | - | - | - | - | - | - | - | - | - |
4mm | - | - | - | - | - | - | - | - | - |
Dw5-2-10 | - | - | 56,363 mm | 0.3 | - | - | - | - | - |
500 | fag | - | 2,5 mm | - | - | - | - | - | - |
n21% | - | - | - | - | - | - | - | - | - |
BVCF-2.0-316-C3 | Parker | - | - | - | - | - | - | - | - |
x201 | - | - | 39,5 mm | - | - | - | - | - | - |
Low Price XIU15/575 Cross Roller Bearing 462*657*45mm | Dimension F:14.96 in; Shaft Size :90 mm; C0 - Static Load:87200 lb; Eng Internal Radial Clearance - Min:0.0024; Grease Lubrication - T Seal:2000 rpm; Weight:56 lb; Float:0.083 in; Full Timken Part Number:QMSN18J090SB; Oil Lubrication - M/N Seal:1400 rpm; Pre Install Clearance Min:0.0024 in; |
EX450-3 Excavator HITACHI Double Row Slewing Bearing 1652*1274*130mm | Limiting Speed - Grease:2,300 rpm; da (min):124 mm; Limiting Speed - Oil:3,000 rpm; Da (max):226 mm; Retainer Material:Pressed Steel; Configuration:Double Row; Dynamic Load Rating:675,000 N; d:110 mm; Static Load Rating:635,000 N; Groove Width A:8 mm; |
Good Qaulity VI 301120N Slewing Bearing 960*1228*79mm | F:7,94 mm; Width (mm):74; R:2,5 mm; Bore Diameter (mm):80,962; T:74 mm; D:133,35 mm; Outer Diameter (mm):133,35; Weight:2,25 Kg; Bearing number:126080X/126133XG; d:80,962 mm; |
R11-79N3 Outer Gear Cross Roller Slewing Ring Bearings(85.47*69.943*3.858inch) For Radar Antennas | Width (mm):97,2; m:6,74 kg / Weight; r1 min:1 mm; C0a:455000 N / Static lo; da max:90 mm; Brand:FAG; d:75 mm; Bore Diameter (mm):75; Bearing number:54318; Size (mm):75x155x97.2; |
06 0475 22 Slewing Ring Bearing | Weight:1,17 Kg; Bearing number:KBL40154-PP; Bore Diameter (mm):40; L:154 mm; Brand:NBS; D1:59 mm; d:40 mm; D:62 mm; Outer Diameter (mm):62; L1:121,2 mm; |
4000050-004 Manitex Boom Truck Slewing Ring | Bearing number:NN3014K; Weight:1,01 Kg; d:70 mm; (Grease) Lubrication Speed:5 800 r/min; Brand:NTN; Outer Diameter (mm):100; B:30 mm; Basic static load rating (C0):143 kN; Width (mm):30; C:30 mm; |
4000050-006 Manitex Boom Truck Slewing Ring | Brand:FAG; r1 min:1,5 mm; C0r:208000 N / Static lo; nG:6500 1/min / Limitin; Bearing number:NJ2215-E-TVP2 + HJ22; B1:7 mm; Cr:192000 N / Dynamic l; ra max:1,5 mm; m:1,64 kg / Weight; da max:87 mm; |
2788/850 Slewing Bearing 850x980x80mm | H1:155 mm; F:33 mm; E:180 mm; d:70 mm; J:90 mm; S:46 mm; B:78 mm; Bearing number:UCT314; G:27 mm; Brand:ISO; |
9E-1B40-0691-1149 Four-point Contact Ball Slewing Bearing With External Gear Teeth | Bearing number:UC205-14; Weight:0,23 Kg; S1:19,8 mm; Width (mm):34,1; C1:5 mm; B:34,1 mm; S2:5,5 mm; D:52 mm; Dynamic load rating radial (C):14 kN; Static load rating radial (C0):7,85 kN; |
SX011832 Crossed Roller Bearing | Da (max):25 mm; B:9 mm; Fillet Radius/Chamfer:0.6 mm; Limiting Speed - Grease:18,000 rpm; Configuration:Single Row; Enclosure:Double Seal; da (min):15 mm; Radial Clearance:0.008 to 0.023 mm; D:30 mm; Factor fo:13.2; |
VU130225 Slewing Ring Bearing(290*200*24mm)for Filling Machine | Bore Diameter (mm):6; Brand:NTN; Angle (α):20 °; d:6 mm; C:12 mm; D:17 mm; Size (mm):6x17x12; Width (mm):12; Outer Diameter (mm):17; Bearing number:70M6DF/GMP5; |
960DBS145y Four-point Contact Ball Slewing Bearing With Innter Gear | D:3.9368 in; Da - Cup Frontface Backing Diameter:3.90 in; Cup Part Number:28527RB; Cg - Geometry Factor:0.0912; Db - Cup Backface Backing Diameter:3.39 in; r - Cup Backface To Clear Radius1:0.020 in; Y - ISO Factor3:1.59; e - ISO Factor2:0.38; Series:28500; C - Cup Width:0.7813 in; |
CRB40070 Cross Roller Bearing Size 400X580X70mm | Width (mm):24; Size (mm):20x42x24; C:24 mm; d:20 mm; Angle (α):15 °; Outer Diameter (mm):42; B:24 mm; Bore Diameter (mm):20; Brand:SNR; D:42 mm; |
RKS.921150303001 Crossed Roller Slewing Bearings(403*233*55mm) With External Gear Teeth For Textile Machine | r1 min.:1,6 mm; D:381 mm; Size (mm):244.475x381x304.8; Basic dynamic load rating (C):2700 kN; Outer Diameter (mm):381; Calculation factor (e):0,47; Bore Diameter (mm):244,475; Basic static load rating (C0):5240 kN; r min.:5 mm; Bearing number:47TS493830; |
33 0941 01 Light Series Solid Section No Gear Slewing Ring Bearing(1016*872*56mm)for Stacker Crane | Angle:6 °; Size (mm):50x75x35; Bearing number:SA 50 ES 2RS; dk:66 mm; Width (mm):35; Bore Diameter (mm):50; d2:112 mm; Outer Diameter (mm):75; d1:56 mm; Brand:ISB; |
L6-25E9Z Slewing Rings(29.15*21.02*2.2inch) With External Gears For Mining And Forestry Equipment | Bore Type:Cylindrical Bore; Configuration:Single Row; Limiting Speed - Grease:18,000 rpm; Weight:0.022 kg; Da (max):35 mm; Factor fo:16.0; B:7 mm; Enclosure:Double Seal; Dynamic Load Rating:4,300 N; Radial Clearance:0.005 to 0.020 mm; |
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
3R16-220E1 External Gear Heavy Duty Slewing Ring Bearing(236.976*210.04*10.55inch) For Heavy Duty Cranes Video