| No. | Brand | b | B | e | f | m | s | Q | X |
| 304 | - | - | - | - | - | - | - | - | - |
| 6.38mm | INA | - | 9 mm | - | - | - | - | - | - |
| 8mm | - | - | - | - | - | - | - | - | - |
| NJ322 | NSK | - | 20 mm | - | - | - | - | - | - |
| 50-2LS | SKF | - | - | - | - | - | - | - | - |
| SK350-6 | - | - | - | - | - | - | - | - | - |
| Sk230-6e | - | - | - | - | - | - | - | - | - |
| (4x) | - | - | - | - | - | - | - | - | - |
| 100% | - | - | 19 mm | - | - | - | - | - | - |
| 3 | - | - | 200 mm | - | - | - | - | - | - |
| [Jz-T107] | - | - | - | - | - | 0,017 kg / Weight | - | - | - |
| 3000 | - | - | - | - | - | - | - | - | - |
| 55% | - | - | 16 mm | - | - | - | - | - | - |
| S6211.W203B | fag | - | 12,19 mm | - | - | - | - | - | - |
| 28mm | - | - | - | - | - | - | - | - | - |
| 99.5% | - | - | - | - | - | - | - | - | - |
| 2.2mm | - | - | 112 mm | - | - | - | - | - | - |
| 312S | TRW | - | - | - | - | - | - | - | - |
| 12L | - | - | - | - | - | - | - | - | - |
| combi(T25) | - | - | 25 mm | - | - | - | - | - | - |
| DH220-3 | - | - | - | - | - | - | - | - | - |
| 2007 | NSK | - | 114,3 mm | - | - | - | - | - | - |
| C3009g | - | - | - | - | - | - | - | - | - |
| 6201-2Z | SKF | - | - | - | - | - | - | - | - |
| RKS.160.14.0944 Crossed Roller Slewing Bearings(1014*874*56mm) Without Gear For Industrial Manipulator | D1:28 mm; Outer Diameter (mm):35; db min:20 mm; r1 min:0,3 mm; Width (mm):11; Size (mm):15x35x11; Da max:32,6 mm; Cr:15100 N / Dynamic lo; ra max:0,6 mm; Cur:1410 N / Fatigue lim; |
| RB50050 Cross Roller Bearing Size 500x625x50mm | Outer Diameter (mm):110,000; d:70,000 mm; Bearing number:6014LB; C:20,000 mm; B:20,000 mm; Bore Diameter (mm):70,000; Size (mm):70x110x20; D:110,000 mm; Width (mm):20,000; Brand:NTN; |
| XRB2508 RB2508 NRXT2508 Cross Roller Bearing Size 25x41x8 Mm XRB 2508 RB 2508 NRXT 2508 | Fw:23 mm; Brand:Timken; Weight:0,04 Kg; Basic static load rating (C0):25,1 kN; (Grease) Lubrication Speed:14000 r/min; Outer Diameter (mm):35; Basic dynamic load rating (C):25,9 kN; Bc:16 mm; Ew:35 mm; Bearing number:K23X35X16H,ZB2; |
| 3R8-79P9 No Gear Heavy Duty Slewing Bearing(85.43*71.65*5.79inch) For Large Industrial Turntables | d:240.000 mm; Superseded Part:26348YMBW33W45AC3; Y0 - ISO Factor4:2.08; B - Inner Ring Width:147 mm; R - Inner Ring To Clear Radius1:4.000 mm; da - Inner Ring Backing Diameter:286.000 mm; Cage Material:Brass; Reference Thermal Speed Rating (Oil)7:690; r - Outer Ring To Clear Radius2:4.000 mm; B - Outer Ring Width:147.000 mm; |
| L- Shaped Bearing RKS.21 1091 | ra max.:2 mm; Oil lub.:1300; Y2:5.88; Bearing number:23948R; Grease lub.:940; da(min):252; Calculation factor (Y0):3,86; D:320 mm; Brand:KOYO; Basic static load rating (C0):1380 kN; |
| JXR699050 Crossed Roller Bearing | L:7 mm; Brand:Gamet; Outer Diameter (mm):90; da:62 mm; Weight:1,38 Kg; R:3 mm; F:6,35 mm; D:90 mm; J:94,76 mm; Width (mm):64; |
| A12-34E2AG External Gear Slewing Rings(39.833*29.62*3.25inch) For Tunnel Boring Machines | C0 - Static Radial Rating:10800 N; Bearing Weight:0.218 Kg; Ball Type:STEEL; Limiting Speed (Oil):43000 rpm; Ce - Dynamic Radial Rating1:19800 N; Da - Outer Ring Backing Diameter:69.300 mm; R - Inner Ring To Clear Radius2:1.0 mm; Cage Type:CR - Phenolic Outer; do - Ball Diameter:9.525 mm; da - Inner Ring Backing Diameter:51.300 mm; |
| RKS.061.25.1424 Four Point Contact Slewing Bearings(1558*1339*68mm) With External Gear Teeth For Steel Plant | D:460 mm; Bearing number:24156W33; Size (mm):280x460x180; C:180 mm; Brand:ISO; Bore Diameter (mm):280; Width (mm):180; d:280 mm; Outer Diameter (mm):460; B:180 mm; |
| 40 mm x 80 mm x 23 mm RB9016 XRB9016 Cross Roller Bearing Size 90x130x16 Mm RB 9016 XRB 9016 | Basic dynamic load rating (C):164 kN; Width (mm):33; Weight:3,81 Kg; D:210 mm; Size (mm):40 mm x 80 mm x 23 mm ; Brand:NSK; Bearing number:N1028BMR1KR; Bore Diameter (mm):140; d:140 mm; r1 min.:1,1 mm; |
| MTE-210 External Gear Slewing Ring Bearings (14.686*8.268*1.575inch) For Truck-mounted Cranes | Bore Diameter (mm):50; C:12 mm; a:27,1 mm; Brand:CX; Basic dynamic load rating (C):8,7 kN; Basic static load rating (C0):10,4 kN; Size (mm):50x65x12; B1:12 mm; Bearing number:3810-2RS; Outer Diameter (mm):65; |
| 9E-1Z30-1830-0297 Crossed Roller Slewing Rings 1680/2028/120mm | Static Load Rating:4460 lbf; Bearing Number:GYA108RRB; Total Height L:104.8 mm; Series:Standard; Shaft Size d:1 1/2 in; Bolt Hole Spacing J:143.67 mm; Bearing Type:Ball Bearing; Center of Bearing from Housing End A2:13.10 mm; Dimension E:1.610 in; Inside Ring Outside Diameter:2.063 in; |
| 1787/600G Slewing Bearing 600x798x72mm | M:5,13 mm; B1:77,8 mm; B2:22,2 mm; Width (mm):61,91; L:6,4 mm; G:31 mm; d1:84,1 mm; Brand:Timken; Outer Diameter (mm):110; Weight:2,03 Kg; |
| High Quality XI 201905N Cross Roller Bearing 1740*2010*82mm | Brand:MPZ; (Grease) Lubrication Speed:2400 r/min; d:70 mm; Size (mm):70x150x51; Bearing number:22314 KW33; Calculation factor (e):0,37; B:51 mm; Calculation factor (Y0):1,78; r5 min.:2,1 mm; C:51 mm; |
| NRXT40035DD Crossed Roller Bearing | Nlim (grease):8,800 rpm; Contact angle α:25 °; Radial rigidity:578 N/µm; r1a max:0.6 mm; Dynamic load, C:69.6 kN; Characteristic outer ring frequency, BPF0:9.3 Hz; D:145 mm; Preload level:7; Static load, C0:69.5 kN; d1:110.8 mm; |
| RKS.062.25.1314 Four Point Contact Slewing Bearings(1399*1182*68mm) With Internal Gear For Construction And Industry Machines | Outer Dia (D):0.7500; Bearing Type:Cage Retained Roller; Width (B):0.5630; Max Speed (Grease) (X1000 RPM):14,000; Static Load Rating (Cor):2,420; Width (mm):14,3; Bore Diameter (mm):14,3; Shaft (Fw):0.563; Weight (g):12.00; Bearing number:SCE99P; |
| 200DBS202y Slewing Bearing | dk:35.5 mm; r2 min.:0.6 mm; da max.:29.3 mm; Bore Diameter (mm):42; Material constant KM:330; da - max.:29.3 mm; rb max.:0.6 mm; Constant - KM:330; da min.:28.2 mm; |
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
W17-108P1 High-speed Radial Ball Slewing Ring(116.93*99.21*5.51inch) For Machine Tools Video