| No. | Brand | b | B | e | f | m | s | Q | X |
| (5x8x2.5mm) | - | - | - | - | - | - | - | - | - |
| 5 | - | - | 64 mm | - | - | - | - | - | - |
| 5pc | - | - | - | - | - | - | - | - | - |
| 20.5% | - | - | - | - | - | - | - | - | - |
| 1220*2440*3mm/5mm/6mm | - | - | - | - | - | - | 35 mm | - | - |
| 4 | - | - | 16 mm | - | - | - | - | - | - |
| 17mm | - | - | - | - | - | - | - | - | - |
| SR16UU | Nippon | - | - | - | - | - | - | - | - |
| J-28575 | - | - | - | - | - | - | - | - | - |
| 20X32X7 | INA | - | - | - | - | - | - | - | - |
| 234406-M-SP | fag | - | - | - | - | - | - | - | - |
| 4ftx8FT | - | - | - | - | - | - | - | - | - |
| NSK2229 | NSK | - | 27 mm | - | - | - | - | - | - |
| 607 | - | - | - | - | - | - | - | - | - |
| 46% | - | - | - | - | - | - | - | - | - |
| 50kg | - | - | 19 mm | - | - | - | - | - | - |
| 320C | - | - | 27 mm | - | - | - | - | - | - |
| H2312 | SKF | - | - | - | - | - | - | - | - |
| 99.5%Min | - | - | - | - | - | - | - | - | - |
| PC138US-8 | - | - | - | - | - | - | - | - | - |
| lm501349/lm501210 | - | - | - | - | - | - | - | - | - |
| 07 0489 11 Slewing Ring Bearing | Permissible sliding velocity v min.:0 m/s; c2 min:1,2 mm; Basic dynamic load rating - radial direction C:1000 kN; Specific static load factor K0:250 N/mm²; c1 min:0,2 mm; Tolerance shaft:h8; Inventory:0.0; Category:Plain Bearings; Weight / Kilogram:0.886; D:165 mm; |
| 9E-1B30-0679-0868 Four-point Contact Ball Slewing Bearing With External Gear Teeth | Outer Diameter (mm):21; Size (mm):15x21x22; Brand:FAG; D:21 mm; C:22 mm; Width (mm):22; Bore Diameter (mm):15; d:15 mm; Bearing number:F-213995.1; |
| 133.45.2000 Slewing Bearing 1779x2221x231mm | Brand:KOYO; N:35 mm; d:88,9 mm; H3:240 mm; A4:56 mm; Weight:21,3 Kg; B:96 mm; A1:30 mm; J:216 mm; A3:20 mm; |
| Supply VA250818N Slewing Bearing 728*940.1*60mm | Cone Part Number:3198; G2 - Heat Generation Factor (Rib-Roller End):8.8; C0 - Static Radial Rating:22800 lbf; Bearing Weight:0.6 Kg; Design Units:Imperial; Y - ISO Factor9:1.8; K - Factor7:1.76; a - Effective Center Location3:-10.2 mm; B:30.165 mm; d:28.575 mm; |
| 4789/560 Slewing Bearing 560x795x72mm | Bearing number:QJ319N2MA; Da max.:186 mm; r1 min.:3 mm; ra max.:2,5 mm; r2 min.:3 mm; Width (mm):45; Bore Diameter (mm):95; Outer Diameter (mm):200; d1:131 mm; d:95 mm; |
| Crossed Roller Slewing Bearing With Internal Gear RKS.111280101002 | Limiting Speed (Oil):15000 rpm; R - Inner Ring To Clear Radius2:1.5 mm; Ball Type:STEEL; Full Timken Part Number:3MM9120WICRDUH; Cage Type:CR - Phenolic Outer; d:100 mm; do - Ball Diameter:15.081250 mm; Contact Angle:25 º; Da - Outer Ring Backing Diameter:140.800 mm; Bearing Width:24 mm; |
| Good Performance XIU25/886 Cross Roller Bearing 744*988*73mm | Thread (G):M8X1,25; Basic dynamic load rating (C):36 kN; B:49,22 mm; D:80 mm; C:21 mm; Width (mm):49,22; F:52,27 mm; M:4,06 mm; Size (mm):39.6875x80x49.22; J:8 mm; |
| Low Price XIU30/1120 Cross Roller Bearing 940*1242*82mm | Enclosure:Open; Mass:0.001 kg; Dynamic load, C:0.64 kN; Outer Race Width:0.118 Inch | 3 Milli; C:3,000 mm; Bore Diameter (mm):3,000; Category:Single Row Ball Bear; f0:12.4; Precision Class:ABEC 1 | ISO P0; |
| RKS.160.20.1904 Crossed Roller Slewing Bearings(2012*1796*68mm) Without Gear For Industrial Manipulator | SLR:35.6; DA_:13.299; ALP23:0; T:46,038 mm; D_:136.525; C_:36.512; Brand:NSK; d:71,438 mm; C:36,512 mm; Y1:1.3; |
| NRXT13025DD Crossed Roller Bearing | Bore Diameter (mm):200; C:72 mm; D:340 mm; Outer Diameter (mm):340; Weight:40,50 Kg; Width (mm):72; Brand:ISB; H:144 mm; Bearing number:234444; d:200 mm; |
| 16390001 Internal Gear Slewing Ring Bearings (40.88*30.56*3.38inch) For Utility Derricks | B:25,4 mm; D:82,55 mm; R:3,5 mm; Outer Diameter (mm):82,55; C:19,05 mm; r:2 mm; Size (mm):42.875x82.55x23.812; Brand:Timken; Bore Diameter (mm):42,875; Width (mm):23,812; |
| 50 mm x 110 mm x 27 mm CRB25030 NRXT25030 Cross Roller Bearing Size 250x330x30 Mm CRB 25030 NRXT 25030 | Cage Material:Brass; D:400.000 mm; Cg - Geometry Factor8:0.1105; e - ISO Factor3:0.3; Reference Thermal Speed Rating (Grease):930; Y0 - ISO Factor4:2.28; Bearing Weight:65 Kg; d:240.000 mm; Bore Taper:1/12; Y1 - ISO Factor5:3.4; Size (mm):50 mm x 110 mm x 27 mm ; |
| L9-42N9Z Slewing Bearing(47.24*36.16*3.54inch) With Internal Gears For Industrial Turntables | Db - Cup Backface Backing Diameter:261.87 mm; Aa - Cage-Cone Backface Clearance:20.1 mm; B:88.900 mm; Ab - Cage-Cone Frontface Clearance:9.9 mm; C - Cup Width:57.150 mm; Cg - Geometry Factor:0.133; Da - Cup Frontface Backing Diameter:288.50 mm; Series:HH932100; e - ISO Factor8:0.73; C0 - Static Radial Rating:282000 lbf; |
| RKS.160.14.0644 Crossed Roller Slewing Bearings(714*574*56mm) Without Gear For Industrial Manipulator | Basic static load rating (C0):162 kN; d:60 mm; T:33,5 mm; Size (mm):60x130x33.5; Width (mm):33,5; C:22 mm; Brand:ISB; Bearing number:31312; Basic dynamic load rating (C):142 kN; D:130 mm; |
| CRBH15025AUU Bearing | B1:90 mm; Angle (α):40 °; Weight:13,34 Kg; Outer Diameter (mm):200; Brand:CX; D:200 mm; Width (mm):90; Basic dynamic load rating (C):256 kN; Size (mm):95x200x90; d:95 mm; |
| XD.10.0580 Crossed Roller Bearing | da - Cone Frontface Backing Diameter:170.94 mm; Series:107000; B - Cone Width:74.613 mm; a - Effective Center Location3:-15 mm; Cg - Geometry Factor:0.116; Cone Part Number:EE107060V; Db - Cup Backface Backing Diameter:236.98 mm; G2 - Heat Generation Factor (Rib-Roller End):76.3; C0 - Static Radial Rating:263000 lbf; C90 - Dynamic Radial Rating (90 million revolutions)4:54200 lbf; |
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
R9-55N3 Outer Gear Cross Roller Slewing Ring Bearings(60.39*47.7*3.15inch) For Radar Antennas Video