| No. | Brand | b | B | e | f | m | s | Q | X |
| x201 | - | - | 39,5 mm | - | - | - | - | - | - |
| 23936EMB | - | - | 67 mm | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 99.999% | - | - | - | - | - | - | - | - | - |
| 2 | - | - | 74,000 mm | - | - | - | - | - | - |
| AL110150 | John Deere | - | 9 mm | - | - | - | - | - | - |
| 23pc | - | - | - | - | - | - | - | - | - |
| LM67010 | SKF | - | - | - | - | - | - | - | - |
| SM20W | Nippon | - | - | - | - | - | - | - | - |
| 600 | fag | - | - | - | - | - | - | - | - |
| 80 | - | - | 41 mm | - | - | - | - | - | - |
| PC50UU | - | - | 22 mm | - | - | - | - | - | - |
| 10 | - | - | - | - | - | - | - | - | - |
| 50kg | - | - | 19 mm | - | - | - | - | - | - |
| 600 | - | - | 42,9 mm | - | - | 0,44 kg / Weight | - | - | - |
| TD06H-Garrett | - | - | 12 mm | - | - | - | - | - | - |
| 60/32-2RS | - | - | - | - | - | - | - | - | - |
| 3 | - | - | - | - | - | - | - | - | - |
| BMV105 | - | - | 75 mm | - | - | - | - | - | - |
| 708-2G-00700 | - | - | - | - | - | - | - | - | - |
| amal41635 | INA | - | - | - | - | - | - | - | - |
| 307 | INA | - | - | - | - | - | - | - | - |
| 221-7637 | INA | - | - | - | - | - | - | - | - |
| 100m3 | - | - | - | - | - | - | - | - | - |
| 1000 | koyo | - | 135 mm | - | - | - | - | - | - |
| J0922JR-KMSN | Parker | - | 120,000 mm | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 10x48 | - | - | - | - | - | - | - | - | - |
| 22308 | fag | - | - | - | - | - | - | - | - |
| 13204-88601 | - | - | - | - | - | - | - | - | - |
| Crossed Roller Slewing Bearing With Internal Gear RKS.111280101002 | Limiting Speed (Oil):15000 rpm; R - Inner Ring To Clear Radius2:1.5 mm; Ball Type:STEEL; Full Timken Part Number:3MM9120WICRDUH; Cage Type:CR - Phenolic Outer; d:100 mm; do - Ball Diameter:15.081250 mm; Contact Angle:25 º; Da - Outer Ring Backing Diameter:140.800 mm; Bearing Width:24 mm; |
| 06-2810-09 External Gear Slewing Ring Bearing(3116*2600*164mm)for Construction Machinery | Outer Diameter (mm):80; C:21 mm; Bearing number:1680207; B:36 mm; D:80 mm; Width (mm):36; Bore Diameter (mm):35; Brand:CRAFT; Size (mm):35x80x36; d:35 mm; |
| VU360680 Bearing 565*795*79mm | Outer Diameter (mm):120; d:55 mm; Weight:1,57 Kg; R:2,5 mm; Brand:Timken; T:31,5 mm; Calculation factor (e):0,83; D:120 mm; Bearing number:31311; Width (mm):31,5; |
| 07 0489 11 Internal Gear Slewing Bearing(562*385*60mm)for Lifting Machinery | d1:25,1 mm; Size (mm):20x47x15; Weight:0,135 Kg; r1 min.:0,6 mm; Angle (α):60 °; D:47 mm; d2:30,8 mm; Width (mm):15; D2:41,8 mm; Outer Diameter (mm):47; |
| I.1000.22.00.A-T Internal Gear Slewing Ring Bearing(999*828*82mm) For Excavator And Crane | Grease lub.:4200; Bearing number:K65X73X23H; (Refer.)Mass(kg):0.091; Weight:0.091 Kg; Housing(min.):73.010; P/S:S; Basic static load rating (C0):97.7 kN; Ew:73 mm; Bore Diameter (mm):65; EAN:0605790269165; |
| XRA844050 Crossed Roller Bearing | Brand:NTN; Basic static load rating (C0):400 kN; Basic dynamic load rating (C):278 kN; B:42 mm; Weight:7,88 Kg; Width (mm):42; r min.:2,1 mm; Size (mm):170x260x42; d:170 mm; r1 min.:2,1 mm; |
| 10-200311/0-02003 Four-point Contact Ball Slewing Bearing 242/386/56mm | Brand:ISO; B:40 mm; Bearing number:4310; C:40 mm; Width (mm):40; Size (mm):50x110x40; Bore Diameter (mm):50; D:110 mm; d:50 mm; Outer Diameter (mm):110; |
| 130.40.1250 Three Row Roller Slewing Ring Bearing | D:47 mm; Outer Diameter (mm):47; Width (mm):20; Fw:30 mm; Weight:0,125 Kg; B:20 mm; Bore Diameter (mm):30; Basic dynamic load rating (C):22,6 kN; d1:42 mm; Brand:CX; |
| 9E-1B25-0422-0285 Slewing Bearing With External Gear 323.7x520.3x54mm | D:78 mm; C:20 mm; S:1,5 mm; Bearing number:NAO50X78X20; d:50 mm; Weight:0,385 Kg; Bore Diameter (mm):50; B:20 mm; (Grease) Lubrication Speed:4600 r/min; r5 min.:1 mm; |
| 16272001 External Gear Slewing Ring Bearings (143.8*114*11.062inch) For Wind Turbines | Width (mm):4; Weight:0,0008 Kg; Bore Diameter (mm):3; B:4 mm; Brand:FBJ; Basic static load rating (C0):0,177 kN; Size (mm):3x8x4; d:3 mm; C:4 mm; Basic dynamic load rating (C):0,559 kN; |
| R8-46N3 Outer Gear Cross Roller Slewing Ring Bearings(50.87*40.16*2.874inch) For Radar Antennas | D_a:24; B_:12; Manufacturer Name:NSK; Precision Class:Non-Precision; dynamic load capacity:3900 lbf; bore diameter:17 mm; SREN:0; Long Description:17MM Bore 1; 19MM Bo; Noun:Bearing; Basic dynamic load rating (C):17,3 kN; |
| 134.45.2000 Slewing Bearing 1779x2221x231mm | Cor - Static Load Rating:51931 lbf; Maximum Speed:2790 rpm; Bolt Size:2 x M24; Dimension H:4.409 in; Shaft Size:80 mm; Bearing UPC:013992030733; Dimension H1:1.7 in; Seal Type:Viton Single Lip; Dimension L:15.0 in; Housing Width:5.3 in; |
| E.505.20.00.B Slewing Bearing With Outer Gear 503.3x342x56mm | d:1320 mm; Size (mm):1600x1320x122; Calculation factor kr:0.015; Calculation factor f0:18; Da max.:1577 mm; D:1600 mm; Outer Diameter (mm):1320; da min.:1343 mm; D1 ≈:1505.46 mm; d1:1414 mm; |
| RKS.060.20.0644 Four Point Contact Slewing Bearings(716*572*56mm) Without Gear For Stacker Crane | Factor fo:14.4; D1 (max):120.2 mm; B:24 mm; Static Load Rating:44,000 N; da (min):79 mm; Limiting Speed - Grease:5,100 rpm; Enclosure:Single Shield with S; a (max):4.1 mm; Cy (max):6.5 mm; d:70 mm; |
| L9-49E9Z Slewing Ring Bearing(55.04*43.5*3.54inch) With External Gears For Aerial Lifts | D:260 mm; Angle (α):15 °; ra max.:2 mm; (Oil) Lubrication Speed:4500 r/min; Width (mm):33; r1 min.:1 mm; Brand:KOYO; r min.:2 mm; (Grease) Lubrication Speed:3300 r/min; Weight:4.83 Kg; |
| NRXT8016DD Crossed Roller Bearing 80X120X16mm | Ea:431 mm; Dw:40 mm; Brand:INA; Weight / Kilogram:27.3; Minimum Buy Quantity:N/A; Dc:440 mm; Product Group:B04144; Outer Diameter (mm):440; Size (mm):240x440x40; |
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
H7-43N3A Inner Gear Slewing Ring Bearing(45.8*37.8*3.84inch) For Water Treatment Equipment Video