| No. | Brand | b | B | e | f | m | s | Q | X |
| LSL19 | - | - | - | - | - | - | - | - | - |
| G10 | INA | - | - | - | - | - | - | - | - |
| 0.30mm | - | - | - | - | - | - | - | - | - |
| 4WE6H51/AG24NZ45V | Rexroth | - | - | - | - | - | - | - | - |
| CG110 | - | - | - | - | - | - | - | - | - |
| 10] | - | - | - | - | - | - | - | - | - |
| 37230-29055 | - | - | - | - | - | - | - | - | - |
| 750 | NTN | - | - | - | - | - | - | - | - |
| EX400-5 | - | - | 31 mm | - | - | - | - | - | - |
| 9Way | - | - | 46,1 mm | - | - | - | - | - | - |
| LL002 | INA | - | - | 0.46 | - | - | - | - | - |
| NU1068-M1A-C3 | - | - | 25 mm | - | - | - | - | - | - |
| A10VSO | Rexroth | - | - | - | - | - | - | - | - |
| 70 | - | - | - | - | - | - | - | - | - |
| 21% | - | - | - | - | - | - | - | - | - |
| 6006 | SKF | - | - | - | - | - | - | - | - |
| 6D95 | Komatsu | - | 365 mm | - | - | - | - | - | - |
| 7316b | - | - | 16,000 mm | - | - | - | - | - | - |
| 10w | - | - | - | 29 mm | - | - | 25,4 mm | - | - |
| ZX200-3 | - | - | - | - | - | - | - | - | - |
| 13mm | - | 15 mm | - | - | - | - | - | - | - |
| 2W-250-25 | - | - | 51,6 mm | - | - | - | - | - | - |
| (M-NF25F14001) | - | - | - | - | - | - | - | - | - |
| 1220X2440mm | - | - | - | - | - | - | - | - | - |
| 1981 | John Deere | - | - | - | - | - | - | - | - |
| 01 3031 00 Slewing Ring Bearing | Basic dynamic load rating (C):345 kN; (Grease) Lubrication Speed:2 800 r/min; Size (mm):150x196.5x60; C:60 mm; Bore Diameter (mm):150; r min.:2 mm; Width (mm):60; Outer Diameter (mm):196,5; Basic static load rating (C0):690 kN; d:150 mm; |
| R450-7 Excavator HYUNDAI Double Row Slewing Bearing 1675*1346*132mm | Type:Open; Cover Length C1:0.995 in; Cover Diameter A:3.345 in; Number of Bolts:4; |
| A10-110P2D No Gear Slewing Bearings(114.25*105.75*3inch) For Clarifiers And Thickeners | r min.:1,5 mm; (Grease) Lubrication Speed:6 300 r/min; Bearing number:2308 K; C:33 mm; d:40 mm; Width (mm):33; Size (mm):40x90x33; Basic dynamic load rating (C):45,5 kN; Brand:NSK; Calculation factor (Y0):1,5; |
| 12750001 No Gear Slewing Ring Bearings (26.9*18.5*2.375inch) For Aerial Lifts | Bore Diameter (mm):31,75; Bolt (G):1/2; Basic dynamic load rating (C):25,7 kN; N:14 mm; Bearing number:NAPK207-20; Basic static load rating (C0):15,4 kN; J:127 mm; A:48 mm; Brand:FYH; H:46 mm; |
| R8-49E3 Outer Gear Cross Roller Slewing Bearings(65.04*44.8*2.874inch) For Lift Truck Rotators | Y - ISO Factor3:1.8; Da - Cup Frontface Backing Diameter:5.96 in; D:6.1801 in; e - ISO Factor2:0.33; Design Units:Imperial; C - Cup Width:1.3386 in; Cg - Geometry Factor:0.0923; Cup Part Number:KHM220110; r - Cup Backface To Clear Radius1:0.140 in; Db - Cup Backface Backing Diameter:5.59 in; |
| 06 2242 00 Slewing Ring Bearing | d:180,000 mm; D:259,500 mm; Outer Diameter (mm):259,500; B:66,000 mm; C:66,000 mm; Bore Diameter (mm):180,000; Brand:NTN; Size (mm):180x259.500x66; Width (mm):66,000; Bearing number:SF3644DB; |
| 130.45.2240 Slewing Bearing 2019x2461x231mm | Locating Rings (width x OD):SR150X12.5; Jmin:252 mm; Housing Mass:10.4 Kg; Bearing:22217; N1:28 mm; Cage Type:EJ; Jmax:268 mm; C0 Static Load Rating:320; Seal Type:Taconite; A:125.00 mm; |
| RE7013UUC0 High Precision Cross Roller Ring Bearing | Maximum Speed:1220 rpm; Bolt Size:4 x M24; Dimension H:4.3 in; Dimension T:20.0 in; Seal Type:Felt Seal; Dimension P:1.1 in; Bearing - Housing - Seal:LSE611BRH; Support Type:Round Flange; Dimension V:0.1 in; Bearing Number:LSE611BR; |
| 07 0489 11 Internal Gear Slewing Bearing(562*385*60mm)for Lifting Machinery | d1:25,1 mm; Size (mm):20x47x15; Weight:0,135 Kg; r1 min.:0,6 mm; Angle (α):60 °; D:47 mm; d2:30,8 mm; Width (mm):15; D2:41,8 mm; Outer Diameter (mm):47; |
| 3R6-55N9 Internal Gear Heavy Duty Slewing Ring(60.43*47.2*4.72inch) For Climbing Cranes And Tower Cranes | K - Factor7:1.61; Cg - Geometry Factor:0.133; C0 - Static Radial Rating:208000 lbf; B:46.038 mm; a - Effective Center Location3:6.6 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:15900 lbf; R - Cone Backface To Clear Radius1:3.560 mm; e - ISO Factor8:0.36; Da - Cup Frontface Backing Diameter:301.00 mm; Series:LM446300; |
| Slewing Bearing XSU140544 474*674*56mm | J1:168,3 mm; A1:66 mm; Bearing number:UKFCX20; J:238 mm; H3:206 mm; Brand:KOYO; Basic static load rating (C0):105 kN; B1:97 mm; Weight:17,1 Kg; L:276 mm; |
| RKS.062.25.1644 Four Point Contact Slewing Bearings(1752*1495*68mm) With Internal Gear For Construction And Industry Machines | Outside Diameter D:62.000 mm; Outside Ring Width B:6.000 mm; Features:Contact Seals; Clearance:C3; Oil Limiting Speed:4100 rpm; Cr - Dynamic Load Rating:2.7 kN; C0r - Static Load Rating:2.7 kN; Bore Size d:50 mm; Weight:0.034 Kg; Grease Limiting Speed:3500 rpm; |
| 16352001 No Gear Slewing Ring Bearings (93*72.5*9.05inch) For Mining Shovels | Brand:INA; V:90 mm; A:10,3 mm; Bore Diameter (mm):40; d:40 mm; Weight / Kilogram:1.36; N:13,5 mm; U:36,2 mm; Minimum Buy Quantity:N/A; Manufacturer Name:SCHAEFFLER GROUP; |
| SSF1220/32CWHIII Slewing Bearing For 20T Excavator Machine | L:200 mm; e:34 mm; Thread (G):M10x1; A:56 mm; N:19 mm; D1:91,5 mm; A2:78,5 mm; s:33,3 mm; J:159 mm; Bore Diameter (mm):75; |
| China VI 453403N Slewing Bearing 3168*3560*110mm | Basic static load rating (C0):6,65 kN; d1:33,3 mm; Width (mm):21,5; Weight:0,19 Kg; Brand:KOYO; Outer Diameter (mm):47; C:15 mm; Bore Diameter (mm):20; S2:4,8 mm; B1:31 mm; |
| 308DBS206y Slewing Bearing | Calculation factor (Y0):0.37; Width (mm):30.162; a -:7.1 mm; r1 min.:3.5 mm; B:26.909 mm; D:111.125 mm; C:20.638 mm; Size (mm):47.625x111.125x30.16; Basic static load rating (C0):108000 kN; Basic dynamic load rating (C):92000 kN; |
A10-43N28D Internal Gear Slewing Ring Bearing(46.25*37.68*4.25inch) For Sewage And Water Treatment Equipment Video
NTN HK2520 Drawn Cup Needle Roller Bearing 25x32x20mm
Buy NTN HK2520 Drawn Cup Needle Roller Bearing 25x32x20mm with fast shipping and top-rated customer service. Newegg shopping upgraded ™
CUSCINETTO A RULLI HK2520: Automotive
THIS LISTING IS FOR ( 1 ) HK2520 - NTN - Drawn Cup Needle Roller Bearing- 25 mm ID x 32 mm OD x 20 mm W - Needle Roller Bearings - Drawn Cup Needle
Shell Type Needle Roller Bearing by NTN (HK2520) | MISUMI
Shell Type Needle Roller Bearing by NTN (HK2520) - Select, configure, order. MISUMI delivers punctually and offers fair prices. More than 14 million products
HK2520 Drawn cup needle roller bearings : NTN-SNR
HK2520 Drawn cup needle roller bearings on NTN-SNR catalog, Industry Solutions manufacturer for Drawn cup needle roller bearings, opened end market
NTN HK2520 - Needle Roller Bearing - 0.9843 in Bore
NTN HK2520 - Needle Roller Bearing - 0.9843 in Bore, 1.2598 in OD, 0.7874 in Width, Open, Pack of 15 - - Amazon.com
HK2520 - NTN Bearing Finder
Browse Item # HK2520, Drawn Cup Needle Roller Bearing - HK, HMK Type in the NTN Bearing Corp. of America catalog including Item #,Ordering Options,Type
NTN - HK2520 - Motion Industries
NTN HK2520. Needle Roller Bearing - 0.9843 in Bore, 1.2598 in OD, 0.7874 in Width, Open. Mi Item #: 07024938. WARNING: Cancer and Reproductive Harm