| No. | Brand | b | B | e | f | m | s | Q | X |
| 4*8 | - | - | - | - | - | - | - | - | - |
| 4ply | - | - | - | - | - | - | - | - | - |
| 71916CEGA/P4A | - | - | - | - | - | - | - | - | - |
| 4X8 | - | - | - | - | - | - | - | - | - |
| FZR1000 | - | - | - | - | - | - | - | - | - |
| RD250 | - | - | 34,925 mm | - | - | - | - | - | - |
| (4 | - | - | - | - | - | - | - | - | - |
| 750 | fag | - | 288,925 mm | - | - | - | - | - | - |
| 1984-1988 | Timken | - | - | - | - | - | - | - | - |
| NKI25/30 | - | - | 119,000 mm | - | - | - | - | - | - |
| 20" | - | - | - | - | - | - | - | - | - |
| PT6590 | John Deere | - | - | - | - | - | - | - | - |
| #6212ZZC3/EM-L627 | NTN | - | 37,7 mm | - | - | - | - | - | - |
| (ZH-935) | - | - | - | - | - | - | - | - | - |
| GTR1200 | NTN | - | 30,000 mm | - | - | - | - | - | - |
| (3A1001) | - | - | - | - | - | - | - | - | - |
| HSR25LA | IKO | - | 34,1 mm | - | - | - | - | - | - |
| 6008-2Z/QE6 | SKF | - | 33 mm | - | - | - | - | - | - |
| 9106KD | FAFNIR | - | - | - | - | - | - | - | - |
| GCC1927 | TRW | - | - | - | - | - | - | - | - |
| #6016ZZX | koyo | - | - | - | - | - | - | - | - |
| DGMX2 | TOKIMEC | - | - | - | - | - | - | - | - |
| 2 | IKO | - | - | - | - | - | - | - | - |
| 1150*730mm | - | 16.7 mm | - | - | - | - | - | - | - |
| 21%N | - | - | - | - | - | - | - | - | - |
| CRBS608 Crossed Roller Bearing 60X76X8mm | Designation FAG:713690050; Designation SX:CX077; Designation SKF:VKBA 1414; Designation SNR:R158.28; Bearing number:5828; Brand:Ruville; Compatibility:FIAT / DUNA / engin; |
| Crossed Roller Slewing Bearing RKS.160.14.0744 | Basic static load rating (C0):66,5 kN; TSR rpm:8500; dd min:61; GRS rpm:6700; Bearing number:NJ209EM; mass:0.5; SBRG:2; DI_:54.5; Macha rpm:10000; Manufacturer Name:NSK; |
| 01 0947 00 Slewing Ring Bearing | Brand:ISO; Bearing number:7303 BDF; Size (mm):17x47x28; D:47 mm; Bore Diameter (mm):17; a:13,7 mm; Angle (α):40 °; B1:28 mm; d:17 mm; Outer Diameter (mm):47; |
| 12-250755/1-04240 Slewing Bearing With Internal Gear 610/855/80mm | Oil lub.:1000; r1(min):5; Db min.:372 mm; Calculation factor (e):0,81; Cu:131; Bearing No.:30338D; da max:232 mm; Calculation factor (Y0):0,41; C:52 mm; a(mm):119.2; |
| Slewing Bearing RKS.062.25.1534 | r1 min.:1,5 mm; d:457,2 mm; Basic static load rating (C0):9 850 kN; r min.:3,3 mm; Bore Diameter (mm):457,2; Calculation factor (Y2):2,2; B:276,225 mm; Basic dynamic load rating (C):4 000 kN; Bearing number:WTF457KVS5951Eg; Calculation factor (e):0,47; |
| L6-37P9Z No Gear Slewing Rings(41.26*32.83*2.2inch) For Reclaimers | Brand:SIGMA; Bearing number:RT-731; B:34,925 mm; Bore Diameter (mm):76,2; D1:177,8 mm; d:76,2 mm; |
| 23 0541 01 Light Series No Gear Slewing Ring(648*434*56mm)for Bending Robot | Cor - Static Load Rating:149356 lbf; Dimension L :24-3/4 in; Dimension J1 :21-5/8 in; Bearing Type:Split Cylindrical Re; Dimension K :4-1/4 in; Cr - Dynamic Load Rating:103323 lbf; Maximum Speed:1450 rpm; Dimension M :6-3/4 in; Support Type:Four-Bolt Plummer Bl; Bolt Size:4 x 1; |
| Double Row Cylindrical Roller Bearing JC5 | Width (mm):120; α:60 ° / Angle; B:120 mm; ra max:2,1 mm; Size (mm):190x290x120; r1 min:0,6 mm; d:190 mm; ra1 max:0,6 mm; nG Ol:2800 1/min / Limitin; C:60 mm; |
| 9O-1Z40-1815-0106 Crossed Roller Slewing Rings 1610/2025/130mm | Bore Diameter (mm):35; Width (mm):21; d:35 mm; B:21 mm; Brand:Fersa; Bearing number:N307FM; Outer Diameter (mm):80; Size (mm):35x80x21; D:80 mm; |
| VSU251055 Slewing Ring Bearing(1155*955*63mm)for Stacker Crane | Basic static load rating - C0:34500 kN; Width (mm):300; Fatigue load limit Pu:1960 kN; Limiting speed:320 r/min; Size (mm):1720x1320x300; Basic dynamic load rating - C:13200 kN; Basic dynamic load rating C:13200 kN; Calculation factor kr:0.13; E:1640 mm; d1:1452 mm; |
| RKS.111280101002 Crossed Roller Slewing Bearings(562*384*60mm) With Internal Gear Teeth For Industrial Robot Arm | Basic static load rating (C0):421 kN; Width (mm):40; Fw:143,5 mm; Brand:CX; Basic dynamic load rating (C):336 kN; Size (mm):120x215x40; Weight:5,85 Kg; (Grease) Lubrication Speed:2800 r/min; d:120 mm; D:215 mm; |
| 2776DBD101t Four-point Contact Ball Slewing Bearing With Innter Gear | C1:28 mm; Size (mm):32x52x32; Brand:ISB; Bolt (G):M10x25; l3 min.:37 mm; Basic dynamic load rating (C):67 kN; d4:38 mm; S2:22 mm; d5:66 r/min; d2:71 mm; |
| RKS.314310101001 Crossed Roller Slewing Bearings(1447*1038*104mm) With Internal Gear Teeth For Industrial Robot Arm | Y2:3,27; ns:23,5 mm; Bearing number:231/500-E1A-K-MB1 +; Da max:798 mm; d2G:Tr550X6; Bore Diameter (mm):480; m:574 kg / Weight; Brand:FAG; Width (mm):264; l:313 mm; |
| 3R16-245N1 Internal Gear Heavy Duty Slewing Ring(258.46*231.496*10.55inch) For Climbing Cranes And Tower Cranes | R:3,5 mm; Outer Diameter (mm):107,95; T:65,09 mm; D:107,95 mm; Size (mm):50.8x107.95x65.09; Bore Diameter (mm):50,8; Bearing number:455-S/452D+X1S-455; d:50,8 mm; Brand:Timken; r:0,8 mm; |
| Four Point Contact Slewing Bearing Without Gear RKS.901175101001 | Bore Diameter (mm):120; Cy (max):5.1 mm; Groove Width:1.9 mm; Brand:NACHI; a (max):3.7 mm; C:22 mm; Weight:1.15 Kg; r min.:1.1 mm; D1:161.8 mm; Configuration:Single Row; |
| MMXC1952 Crossed Roller Bearing | C:26,195 mm; Weight:1,91 Kg; Basic dynamic load rating (C):182 kN; a:1 mm; T:33,338 mm; Outer Diameter (mm):146,05; B:34,925 mm; Bearing number:47896/47820; Bore Diameter (mm):95,25; Basic static load rating (C0):307 kN; |
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
A8-19E5A External Gear Slewing Rings(23.9*15.12*2.5inch) For Tunnel Boring Machines Video