| No. | Brand | b | B | e | f | m | s | Q | X |
| 17X40X12 | - | - | 17 mm | - | - | - | - | - | - |
| 2 | - | - | 74,000 mm | - | - | - | - | - | - |
| 1] | - | - | - | - | - | - | - | - | - |
| 10 | - | - | 21 mm | - | - | - | - | - | - |
| 99.95% | - | - | - | - | - | - | - | - | - |
| 500ML | - | - | 13 mm | - | - | - | - | - | - |
| NU2313ECP/C3 | - | - | - | - | - | - | - | - | - |
| 71905 | - | - | 7 mm | - | - | - | - | - | - |
| 41.32006 | Nachi | - | 39,687 mm | - | - | - | - | - | - |
| 900 | - | - | - | - | - | - | - | - | - |
| 12mm | - | - | 24 mm | - | - | - | - | - | - |
| Pvp2-30-70 | - | - | - | - | - | - | - | - | - |
| 25 | - | - | - | - | - | - | - | - | - |
| YF10-16 | - | - | - | - | - | - | - | - | - |
| 18790R/ | NSK | - | 3 mm | - | - | - | - | - | - |
| 6203 | - | - | - | - | - | - | - | - | - |
| V50 | - | - | - | - | - | - | - | - | - |
| (Zhs147) | - | - | 12 mm | - | - | - | - | - | - |
| 110 | - | - | - | - | - | - | - | - | - |
| 4lz-4.6 | - | - | 54 mm | - | - | - | - | - | - |
| SD.505.20.00.C Flange Light Type Slewing Ring Gear(518*304*56mm) For Packaging Machinery | B:20 mm; r min.:1.1 mm; D:90 mm; Basic dynamic load rating (C):48.2 kN; Basic static load rating (C0):51.0 kN; Outer Diameter (mm):90; Size (mm):50x90x20; d:50 mm; Bearing number:NUP210; r1 min.:1.1 mm; |
| 615661A Crossed Roller Bearing | Calculation factor (Y0):0.35; rb max.:2 mm; W:120 mm; D:180 mm; r1 min.:2.5 mm; Width (mm):120; Basic dynamic load rating (C):600 kN; T:120 mm; Size (mm):110x180x120; Da max.:170 mm; |
| 134.32.1120 Slewing Bearing 950x1284x182mm | B1:-; Width (mm):72; d:170 mm; Outer Diameter (mm):360; rb(max):3; (Grease) Lubrication Speed:1500 r/min; Fw:220 mm; db(max):216; C:72 mm; Basic static load rating (C0):1010 kN; |
| HT10-54E1Z External Gear Slewing Ring Bearings (59.84*48*3.5inch) For Jib Cranes | Ew:61 mm; Brand:KOYO; (Oil) Lubrication Speed:8500 r/min; Basic dynamic load rating (C):42,5 kN; Size (mm):56x61x33.5; Bearing number:R56/34; Bore Diameter (mm):56; Fw:56 mm; (Grease) Lubrication Speed:4800 r/min; Basic static load rating (C0):111 kN; |
| CRBH15025A Crossed Roller Bearing | Bolt Spacing Minimum:3.721 Inch | 94.513M; Bore:0.875 Inch | 22.225; Housing Configuration:1 Piece Solid; H2:68,276 mm; Other Features:Single Row | Spheric; Thread (Q):1/8 NPT; Actual Bolt Center to Center:0 Inch | 0Millimeter; UNSPSC:31171511; H:33,351 mm; Base to Center Height:1.313 Inch | 33.35 M; |
| 16331001 Internal Gear Slewing Ring Bearings (41.97*30.828*3.35inch) For Tunnel Boring Machines | rb max.:2 mm; (Grease) Lubrication Speed:340 r/min; Bore Diameter (mm):400; C0r:3720; Bearing number:46280; da min.:428 mm; ra(max):5; rb(max):2; Calculation factor (e):0,32; Calculation factor (Y0):2,07; |
| XU160260 Bearing 191*329*46mm | C:160 mm; Angle:3 °; Size (mm):400x540x190; D:540 mm; Brand:FBJ; Bore Diameter (mm):400; d:400 mm; Weight:132 Kg; d1:425 mm; Bearing number:GEC400XS; |
| XR855053 Crossed Roller Bearing | d:595,312 mm; Width (mm):615,95; T:615,95 mm; Brand:NTN; Bore Diameter (mm):595,312; Size (mm):595.312x844.55x615.9; Bearing number:CRO-11913; D:844,55 mm; Outer Diameter (mm):844,55; |
| RKS.061.20.0544 Four Point Contact Slewing Bearings(640.3*472*56mm) With External Gear Teeth For Steel Plant | Size (mm):12x32x15.9; B:15.9 mm; Bore Diameter (mm):12; r min.:0.6 mm; d:12 mm; (Grease) Lubrication Speed:16000 r/min; Basic static load rating (C0):5,95 kN; Weight:0.060 Kg; Basic dynamic load rating (C):10,7 kN; Angle (α):30 °; |
| RKS.060.20.0944 Four Point Contact Slewing Bearings(1016*872*56mm) Without Gear For Stacker Crane | Width (mm):180; Outer Diameter (mm):124; Cage Material:Brass; Noun:Bearing; Contact Angle:60 Degree; Bearing number:562924/GNP4; Enclosure:Open; T:180 mm; Keyword String:Angular Contact Ball; Category:Precision Ball Beari; |
| 9E-1Z30-0980-1042 Precise Crossed Roller Slewing Bearing With External Gear 868/1143/100mm | Shipping Weight:7181 lb; Seal Type:Viton Single Lip; Note:This product line wa; Ca - Axial Load Rating:89924 lbf; Support Type:Eight-Bolt Plummer B; Dimension M:16.0 in; Cr - Dynamic Load Rating:1113029 lbf; Bolt Size:8 x M56; Pillow/Plummer Block Style:Split Cylindrical Ho; Maximum Speed:270 rpm; |
| RK6-16E1Z External Gear Slewing Ring Bearings (19.9*11.97*2.205inch) For Stretch Wrapping Machines | Cr:720000 N / Dynamic l; da min:170,2 mm; ns:12,2 mm; Y2:4,62; ds:6,3 mm; Da max:229,8 mm; Brand:FAG; ra max:2,1 mm; Size (mm):160x240x60; rmin:2,1 mm; |
| RKS.312290202001 Crossed Roller Slewing Bearings(1316*1082*105mm) With Internal Gear Teeth For Industrial Robot Arm | Housing Bore Dia. (Dh) - 210 +0.046 / -0:210 +0.046 / 0; Bearing Length Tolerance (B tol.) - +0 / -0.40:+0 / 0.40; ID Chamfer Angle (B deg.):45; Brand:AST; Shaft Size (ds) - 205 -0.170 / -0.216:205 0.170 / 0.216; Bearing Bore after Mounting (di) - 210 +0.115 / -0:210 +0.115 / 0; Material:Wrapped bronze with; Bearing Length, Nominal (B):80.000; OD Chamfer Length (Co):1.800; Bearing number:AST090 20580; |
| 20 mm x 42 mm x 12 mm S14-90E1 Single Row Vertical Thrust Slewing Bearings(96.64*84.62*4.38inch) For Stationary And Mobile Cranes | Bearing number:5214WD; Weight:2,096 Kg; Basic dynamic load rating (C):139 kN; D:125 mm; Angle (α):30 °; C:39,67 mm; B:39,67 mm; Brand:Timken; Size (mm):20 mm x 42 mm x 12 mm ; Bore Diameter (mm):70; |
| RKS.160.16.1204 Crossed Roller Slewing Bearings(1289*1119*68mm) Without Gear For Industrial Manipulator | Weight:5,4 Kg; Brand:KOYO; Bore Diameter (mm):160; Angle (α):30 °; (Grease) Lubrication Speed:3 400 r/min; C:38 mm; D:240 mm; r min.:2,1 mm; d:160 mm; Size (mm):160x240x38; |
| 02 0720 02 Internal Gear Slewing Bearing(835*578*82mm)for Lifting Machinery | da min.:64 mm; Outside Diameter:3.937 Inch | 100 Mil; Snap Ring:No; Rolling Element:Ball Bearing; Limiting Speed - Grease:5,300 rpm; Category:Angular Contact Ball; Enclosure:Open; Weight / Kilogram:0.636; Da max.:91 mm; |
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
L6-29P9ZD No Gear Slewing Rings(33.39*24.96*2.2inch) For Reclaimers Video