| No. | Brand | b | B | e | f | m | s | Q | X |
| 24.0111-0101.2 | - | - | - | - | - | - | - | - | - |
| Tnb-1e | - | - | - | - | - | - | - | - | - |
| 2pc | - | - | 20,000 mm | - | - | - | - | - | - |
| 447200-0508 | INA | - | 14,732 mm | - | - | - | - | - | - |
| 22205CA/W33 | NSK | - | - | - | - | - | - | - | - |
| 27ft | INA | - | - | - | - | - | - | - | - |
| 400 | Danfoss | - | 57,15 mm | - | - | - | - | - | - |
| 16 | - | - | - | - | - | - | - | - | - |
| SV6803 | - | - | - | - | - | - | - | - | - |
| 6203-2RS | - | - | - | - | - | - | - | - | - |
| 2x | TRW | - | 53 mm | - | - | - | - | - | - |
| 800cc | - | - | 16 mm | - | - | - | - | - | - |
| CDM1 | Rexroth | - | 320,000 mm | - | - | - | - | - | - |
| 6808 | - | - | - | - | - | - | - | - | - |
| 4t | - | - | - | - | - | - | - | - | - |
| 315cc-100-cc | - | - | - | - | - | - | - | - | - |
| 90% | INA | - | - | - | - | 265 g / Weight | - | - | - |
| 17"X | - | - | - | - | - | - | - | - | - |
| T2DA14-2NSA1-B75-2BA | Parker | - | - | - | - | - | - | - | - |
| 620 | NTN | - | 125,73 mm | - | - | - | - | - | - |
| 18mm | INA | 1,7 mm | 22 mm | - | - | - | - | - | - |
| 1787/2650G Slewing Bearing 1640x2050x160mm | db min:171 mm; C0r:510000 N / Static lo; Outer Diameter (mm):250; Size (mm):140x250x42; F:169 mm; d:140 mm; Bore Diameter (mm):140; Brand:FAG; D:250 mm; Bearing number:NU228-E-M1; |
| VS061A00 Slewing Ring Bearing Without Gear | Calculation factor (Y0):0,79; C:15,875 mm; a:22,1 mm; Y0:0.79; yobi:LM613449/LM613410; Basic static load rating (C0):113 kN; C_:15.875; outer r:0.8; B_:21.996; KBRG:3161; |
| RKS.161.16.1204 Crossed Roller Slewing Bearings(1338*1119*68) With External Gear For Industrial Automation | B:175 mm; Bore Diameter (mm):950; Size (mm):950x1250x175; Outer Diameter (mm):1250; Basic static load rating (C0):12100 kN; D:1250 mm; C:175 mm; Basic dynamic load rating (C):5280 kN; (Grease) Lubrication Speed:340 r/min; Width (mm):175; |
| STM2000/32CHHII Slewing Bearing For 100T Crawler Crane | D:6.1250 in; e - ISO Factor8:0.33; T - Bearing Width across Cones:4 in; Series:745; R - Cone Backface To Clear Radius1:0.12 in; Y1 - ISO Factor9:2.08; Design Units:Imperial; K - Factor7:1.8; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:10300 lbf; r - Cup Frontface To Clear Radius2:0.06 in; |
| 10 mm x 35 mm x 11 mm CRBC3010UU Crossed Roller Bearing | B:8 mm; Basic dynamic load rating - C:0.24 kN; Basic static load rating - C0:0.16 kN; Width (mm):8; Bore Diameter (mm):35; Size (mm):10 mm x 35 mm x 11 mm ; Outer Diameter (mm):17; d:17 mm; Brand:SKF; Limiting speed:1400 r/min; |
| 1787/710G2 Slewing Bearing 710x924x67mm | d1:360 mm; Basic dynamic load rating (C):4650 kN; d:340 mm; Width (mm):160; Bore Diameter (mm):340; Angle:3 °; Size (mm):340x460x160; Outer Diameter (mm):460; Bearing number:GEC340XS; Brand:FBJ; |
| 9E-1B35-0508-1227 Slewing Bearing With External Gear 390x654x85mm | Keyword String:Ball; DA_:19.05; da min:59; SREN:-0.04; Basic static load rating (C0):38,5 kN; KBRG:6101; Category:Single Row Ball Bear; overall width:27 mm; Noun:Bearing; finish/coating:Uncoated; |
| 16352001 No Gear Slewing Ring Bearings (93*72.5*9.05inch) For Mining Shovels | Brand:INA; V:90 mm; A:10,3 mm; Bore Diameter (mm):40; d:40 mm; Weight / Kilogram:1.36; N:13,5 mm; U:36,2 mm; Minimum Buy Quantity:N/A; Manufacturer Name:SCHAEFFLER GROUP; |
| XU060111 Cross Roller Slewing Ring Bearing For Industrial Manipulator | D:148,43 mm; C:21,433 mm; Bearing number:42368/42584; T:28,575 mm; Brand:ISO; B:28,971 mm; Size (mm):93.662x148.43x28.575; Width (mm):28,575; Bore Diameter (mm):93,662; a:3 mm; |
| RKS.062.25.1204 Bearing | Width (mm):6; Outer Diameter (mm):19; r:0,3 mm; Temperature:to 800°C °; B:6 mm; Bore Diameter (mm):7; D:19 mm; d:7 mm; C:6 mm; Size (mm):7x19x6; |
| High Quality XIU25/1077 Cross Roller Bearing 920*1179*73mm | Thread (G):M24x2; d:25 mm; B:31 mm; M:22 mm; Brand:CRAFT; G:58 mm; o:29,6 mm; L:124 mm; Bore Diameter (mm):25; Bearing number:SAL25T/K; |
| 3R16-220N1 Internal Gear Heavy Duty Slewing Ring(230.91*204.094*10.55inch) For Climbing Cranes And Tower Cranes | Size (mm):101.6x184.15x71.4375; Outer Diameter (mm):184,15; Basic dynamic load rating (C):305 kN; (Grease) Lubrication Speed:1100 r/min; T:71,4375 mm; Weight:7,98 Kg; Bore Diameter (mm):101,6; Brand:RHP; Width (mm):71,4375; D:184,15 mm; |
| A16-86P1 No Gear Slewing Bearings(91*80*6inch) For Clarifiers And Thickeners | (Grease) Lubrication Speed:3100 r/min; Cu:5.05; Width (mm):31; Cr:77.7; r min.:1.5 mm; D:125 mm; Bearing number:4214; Bearing No.:4214; d:70 mm; Da max.:117 mm; |
| CRBS508 Crossed Roller Bearing 50X66X8mm | d1:723 mm; D:850 mm; Bearing number:292/630 M; Bore Diameter (mm):630; Basic static load rating (C0):23600 kN; Outer Diameter (mm):850; Brand:CX; Weight:210 Kg; Basic dynamic load rating (C):4770 kN; T:132 mm; |
| I.700.22.00.A Slewing Bearing | Dimension H:10.748 in; Shaft Size:7 in; Ca - Axial Load Rating:16006 lbf; Bolt Size:4 x M30; Dimension H2:21.5 in; Bearing Number:MSE700BR; Housing Width:8.7 in; Cor - Static Load Rating:305066 lbf; Dimension M:9.5 in; Cr - Dynamic Load Rating:208398 lbf; |
| STM1800/32 Slewing Ring Bearing | R:130 mm; Angle:7 °; Bearing number:GE 100 ES; C:55 mm; Brand:ISO; Bore Diameter (mm):100; Size (mm):100x150x70; Width (mm):70; d:100 mm; Outer Diameter (mm):150; |
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
L9-46E9Z Slewing Ring Bearing(51.04*39.57*3.54inch) With External Gears For Aerial Lifts Video