No. | Brand | b | B | e | f | m | s | Q | X |
6308Z | NSK | - | 24,5 mm | - | - | - | - | - | - |
6205ZZNR | NSK | - | - | - | - | - | - | - | - |
10 | - | - | 21 mm | - | - | - | - | - | - |
NUP2320 | NSK | - | 8 mm | - | - | - | - | - | - |
2 | - | - | - | - | - | - | - | - | - |
12-0-3 | - | - | - | - | - | - | - | - | - |
PC200-8 | - | - | 18 mm | - | - | - | - | - | - |
1pcs | - | - | - | - | - | - | - | - | - |
310SFFC | TRW | - | - | - | - | - | - | - | - |
9E-1B22-0414-0707 | - | - | 58 mm | - | - | - | - | - | - |
100% | - | - | 44 mm | - | - | - | - | - | - |
5x10x4 | - | - | 72,24 mm | - | - | - | - | - | - |
1/10 | - | - | - | - | - | - | - | - | - |
16mm | - | - | 29,317 mm | - | - | - | - | - | - |
ZS4-L25 | - | - | 40 mm | 0,27 | - | 3,18 kg / Weight | - | - | - |
VDR.0171344693/694 | - | - | - | 0.3 | - | - | - | - | - |
LM20UU | IKO | - | 16 mm | - | - | - | - | - | - |
GCC1927 | TRW | - | - | - | - | - | - | - | - |
A8V107dm/A8V125dm/A8V160dm | - | - | - | - | - | - | - | - | - |
6008/C3 | SKF | - | - | - | - | - | - | - | - |
(TB-M-004) | - | - | - | - | - | - | - | - | - |
2pc | - | - | 82 mm | - | - | - | - | - | - |
1300 | koyo | - | 8 mm | - | - | - | - | - | - |
PV016R1K8T1NMMC | Parker | - | - | - | - | - | - | - | - |
2x | - | - | - | - | - | - | - | - | - |
250rpm | - | - | - | - | - | - | - | - | - |
92-200841/1-07253 Slewing Bearing With Internal Gear 736/947/56mm | Brand:AST; Inner Width (Bi):4.6900; Bore Dia (d):4.5000; Outer Width (Bo):3.7500; Mis-alignment Angle (a deg.):10; Spherical Diameter (dk or Dk):7.205; Material:52100 Chrome steel,; Bearing Type:sealed; Bore Diameter (mm):114,3; Bearing number:GEGZ114ES-2RS; |
RK6-16E1Z External Gear Slewing Ring Bearings (19.9*11.97*2.205inch) For Stretch Wrapping Machines | Cr:720000 N / Dynamic l; da min:170,2 mm; ns:12,2 mm; Y2:4,62; ds:6,3 mm; Da max:229,8 mm; Brand:FAG; ra max:2,1 mm; Size (mm):160x240x60; rmin:2,1 mm; |
40 x 3.543 Inch | 90 Millimeter x 0.906 Inch | 23 Millimeter 10-250455/0-04010 Four-point Contact Ball Slewing Bearing 355mmx555mmx63mm | C:108 mm; Bore Diameter (mm):180; D:320 mm; d:180 mm; F:206 mm; B:108 mm; Brand:Timken; E:294 mm; Outer Diameter (mm):294; Bearing number:180RN92; Size (mm):40 x 3.543 Inch | 90 Millimeter x 0.906 Inch | 23 Millimeter ; |
CRBF8022 A Cross Roller Bearing | C1(2) - Dynamic Radial Rating (Two-Rows):2840000 N; Cage Material:Brass; d:360.000 mm; B - Inner Ring Width:134 mm; Y2 - ISO Factor6:2.88; Reference Thermal Speed Rating (Grease):770; Da - Outer Ring Backing Diameter:499.000 mm; e - ISO Factor3:0.23; da - Inner Ring Backing Diameter:400.000 mm; r - Outer Ring To Clear Radius2:4.000 mm; |
300DBS208y Slewing Bearing | C0r:7.55; Outer Diameter (mm):127; Mass(kg):0.100; Cr:5.20; C:6,35 mm; Brand:KOYO; Bore Diameter (mm):114,3; r:0,6 mm; Bearing No.:KAX045; d:114,3 mm; |
CRBC3010UU Bearing 30x55x10mm | Width (mm):24,75; db:74 mm; R:2 mm; Brand:Timken; da:77 mm; C:20 mm; Weight:1,16 Kg; Basic static load rating (C0):157 kN; Size (mm):65x120x24.75; d:65 mm; |
I.1300.32.00.C Internal Gear Flange Slewing Turntable Bearing(1300*1012*90mm) For Mobile Trailers | Weight:14,8 Kg; Bearing number:32038-X; T:64 mm; Calculation factor (e):0,44; C:48 mm; Basic static load rating (C0):1120 kN; Calculation factor (Y):1,36; d:190 mm; rb max.:2,5 mm; db min:202 mm; |
JXR637050 Crossed Roller Bearing | Characteristic cage frequency, FTF:0.43 Hz; da max:48.9 mm; Width (mm):15,000; Bearing number:6008FT150ZZ; Static load, C0:11.5 kN; Mass:0.19 kg; C:15,000 mm; Brand:SNR; Outer Diameter (mm):68,000; Nref:11,000 rpm; |
HS6-25N1Z Internal Gear Slewing Ring Bearings (29.5*21.6*2.2inch) For Material Handling Equipment | Bore Diameter (mm):30; B1:4 mm; Weight:0,022 Kg; D1:37 mm; Basic static load rating (C0):69,5 kN; Bearing number:AXW 30; Size (mm):30x37x3.2; Brand:NBS; Width (mm):3,2; Basic dynamic load rating (C):15,9 kN; |
2776DBD101t Four-point Contact Ball Slewing Bearing With Innter Gear | C1:28 mm; Size (mm):32x52x32; Brand:ISB; Bolt (G):M10x25; l3 min.:37 mm; Basic dynamic load rating (C):67 kN; d4:38 mm; S2:22 mm; d5:66 r/min; d2:71 mm; |
Slewing Bearing RKS.062.25.1644 | Flange Dia. (Dfl pm 0.5):24.000; Bearing Length, Nominal (B):4.000; Bearing number:ASTEPBF 1618-04; Bearing Outside Diameter, Nominal(Do):18.000; Brand:AST; Bearing Bore after Mounting (di) - 16.102:16.032; Bore Diameter (mm):16; Shaft Dia., Nominal (d):16.0000; Outer Diameter (mm):18; Bearing Type:flanged; |
HT10-48E1Z External Gear Slewing Ring Bearings (53.84*42*3.5inch) For Jib Cranes | Basic dynamic load rating - C:17.4 kN; D:90 mm; Category:Single Row Ball Bear; Noun:Bearing; Limiting speed:4300 r/min; Inner Race Width:0 Inch | 0 Millimete; Enclosure Type:Contact Seal; d1:73.2 mm; Size (mm):90x65x13; Brand:SKF; |
SH50 Excavator SUMITOMO Three Row Slewing Bearing 615*451*53mm | D:146,05 mm; B:34,925 mm; Bearing number:47890/47820; Width (mm):33,338; Size (mm):92.075x146.05x33.338; Weight:2,08 Kg; Brand:FBJ; d:92,075 mm; Bore Diameter (mm):92,075; C:26,195 mm; |
Slewing Bearing RKS.062.20.0544 With Internal Gear | C1:14 mm; Static load rating axial (C0):72 kN; Bore Diameter (mm):50; Fw:50 mm; Size (mm):50x62x35; D:62 mm; Brand:NBS; C2:10 mm; D1:70,2 mm; Weight:0,28 Kg; |
16270001 External Gear Slewing Ring Bearings (102.992*84.134*7.205inch) For Wind Turbines | Bolt (G):M10; N:13 mm; Width (mm):36,5; A:38 mm; d:25 mm; Bearing number:NAP205; N1:18 mm; Weight:0,87 Kg; J:105 mm; H1:13 mm; |
601DBS146y Four-point Contact Ball Slewing Bearing With Innter Gear | Angle:16 °; Bearing number:SIKB14F; l5:8 mm; d2 max.:37 mm; d:14 mm; l4 max.:76 mm; d3:20 mm; Basic dynamic load rating (C):17 kN; l3 min.:21 mm; l7 min.:18 mm; |
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
16352001 No Gear Slewing Ring Bearings (93*72.5*9.05inch) For Mining Shovels Video