| No. | Brand | b | B | e | f | m | s | Q | X |
| 50kg | - | - | 19 mm | - | - | - | - | - | - |
| SL18 | - | - | - | - | - | - | - | - | - |
| 300 | - | - | - | - | - | - | - | - | - |
| 4.8mm | - | - | - | - | - | - | - | - | - |
| [Jz-T107] | - | - | - | - | - | 0,017 kg / Weight | - | - | - |
| 4'x8' | - | - | 24 mm | - | - | - | - | - | - |
| B522ADB42C | Parker | - | 55 mm | - | - | - | - | - | - |
| 4t | - | - | - | - | - | - | - | - | - |
| 99.5% | - | - | - | - | - | - | - | - | - |
| 4-Touren | - | - | - | - | - | - | - | - | - |
| 7 | - | - | 167 mm | - | - | - | - | - | - |
| G22 | - | 30 mm | - | - | - | - | - | - | - |
| FB2041 | - | - | - | - | - | - | - | - | - |
| SWK1002 | - | - | - | - | - | - | - | - | - |
| 851-72013 | NSK | - | - | - | - | - | - | - | - |
| TABLECLOTH~100% | - | - | - | - | - | 0,14 kg / Weight | - | - | - |
| S6211.W203B | fag | - | 12,19 mm | - | - | - | - | - | - |
| (ZH-3940) | - | - | - | - | - | - | - | - | - |
| 22220EK/C4 | - | - | - | - | - | - | - | - | - |
| SL185030-A-C3 | INA | - | - | - | - | - | - | - | - |
| 600ml | - | - | - | - | - | - | - | - | - |
| 2003 | NSK | - | 100 mm | - | - | - | - | - | - |
| 46% | - | - | - | - | - | - | - | - | - |
| EDTA-Zn-15 | - | - | - | - | - | - | - | - | - |
| GB-16 | - | - | - | - | - | - | - | - | - |
| 22x9 | - | - | - | - | - | - | - | - | - |
| Crossed Roller Slewing Bearing With Internal Gear RKS.313500404001 | ra max.:3,5 mm; Size (mm):76.2x161.925x53.975; C:42,862 mm; B:55,1 mm; Bore Diameter (mm):76,2; da:99 mm; Outer Diameter (mm):161,925; (Grease) Lubrication Speed:2 300 r/min; Db:154 mm; Width (mm):53,975; |
| Low Price XIU15/575 Cross Roller Bearing 462*657*45mm | Dimension F:14.96 in; Shaft Size :90 mm; C0 - Static Load:87200 lb; Eng Internal Radial Clearance - Min:0.0024; Grease Lubrication - T Seal:2000 rpm; Weight:56 lb; Float:0.083 in; Full Timken Part Number:QMSN18J090SB; Oil Lubrication - M/N Seal:1400 rpm; Pre Install Clearance Min:0.0024 in; |
| VLI201094-N Flange Internal Gear Type Slewing Ring Bearing (1198*984*56mm) For Packing Machine | Internal Special Features:No; (Oil) Lubrication Speed:8400 r/min; Internal Clearance:C0-Medium; Weight:0,211 Kg; Oil lub.:8400; Bore:2.559 Inch | 65 Mill; Category:Single Row Ball Bear; (Refer.)Mass(kg):0.211; Basic dynamic load rating (C):17,4 kN; D:90 mm; |
| XI120321 Bearing 257.2*383*38mm | B:3 mm; C:3 mm; Outer Diameter (mm):10; d:6 mm; D1:11,2 mm; Brand:KOYO; C1:0,6 mm; (Grease) Lubrication Speed:53000 r/min; Size (mm):6x10x3; Bearing number:WMLF6010ZZX; |
| 16282001 No Gear Slewing Ring Bearings (20.375*12.25*4.5inch) For Large Cranes | D:42 mm; Size (mm):22x42x28; r1 min.:0,3 mm; Bearing number:GE 22 SP; Angle:15 °; Bore Diameter (mm):22; B:28 mm; dk:38,1 mm; Brand:ISB; Outer Diameter (mm):42; |
| 10-251055/0-03030 Four-point Contact Ball Slewing Bearing 955mmx1155mmx63mm | Width (mm):155,2; Weight:3,1 Kg; D:75 mm; Bore Diameter (mm):50; B:155,2 mm; Bearing number:LME50LUU; d:50 mm; Outer Diameter (mm):75; Brand:Samick; W:2,65 mm; |
| 9E-1Z20-0474-0100 Crossed Roller Slewing Rings 380/589.5/75mm | Basic dynamic load rating (C):1630 kN; Calculation factor (Y1):2,03; Size (mm):220x370x120; Basic static load rating (C0):2900 kN; Weight:62,4 Kg; da min.:237 mm; d1:200 mm; Bearing number:23144-B-K-MB+AH3144; Limiting speed:1 400 r/min; D:370 mm; |
| 1290DBS204y Four-point Contact Ball Slewing Bearing With External Gear | L2:21 mm; L3:121 mm; H:167 mm; N1:32 mm; L1:140 mm; Bearing number:UCT215-48E; H2:111 mm; A1:27 mm; H1:150,8 mm; Brand:KOYO; |
| 9E-1B25-0422-0761 Slewing Bearing With External Gear 323.8x520.3x54mm | Cone Part Number:JF4049; C1 - Dynamic Radial Rating (1 million revolutions)5:162000 N; Ab - Cage-Cone Frontface Clearance:2.5 mm; da - Cone Frontface Backing Diameter:49.02 mm; d:40 mm; Da - Cup Frontface Backing Diameter:80.77 mm; K - Factor7:1.7; Cg - Geometry Factor:0.0841; C0 - Static Radial Rating:160000 N; db - Cone Backface Backing Diameter:55.12 mm; |
| Low Price XI 342540N Cross Roller Bearing 2286*2700*118mm | d:300 mm; Brand:ISO; Size (mm):300x460x118; Bearing number:NU3060; Outer Diameter (mm):460; Width (mm):118; D:460 mm; C:118 mm; Bore Diameter (mm):300; B:118 mm; |
| 07 1304 04 Slewing Ring Bearing | T:40 mm; d:50 mm; Manufacturer Name:SCHAEFFLER GROUP; Category:Mounted Units &; L:145 mm; B1:62,8 mm; Bore Diameter (mm):50; Product Group:M06110; Weight / Kilogram:2.575; Thread (K):M24; |
| PC400-6 Excavator KOMATSU Double Row Slewing Bearing 1563*1240*152mm | Brand:NSK; D:370 mm; Bore Diameter (mm):280; Bearing number:BA280-2SA; Width (mm):40; Size (mm):280x370x40; Outer Diameter (mm):370; d:280 mm; |
| DH80GO Excavator DAEWOO Double Row Sleiwng Bearing 901*640*82mm | da (min):47 mm; Configuration:Single Row; d:45 mm; D:58 mm; Bore Type:Cylindrical Bore; Weight:0.040 kg; B:7 mm; Dynamic Load Rating:5,350 N; Static Load Rating:4,900 N; ra (max):0.3 mm; |
| Supply VI 501945N Slewing Bearing 1722*2088*110mm | Outer Diameter (mm):200; Bore Diameter (mm):110; Width (mm):53; C:53 mm; Brand:SIGMA; d:110 mm; Size (mm):110x200x53; D:200 mm; Bearing number:NUP 2222; B:53 mm; |
| 08 0220 05 Slewing Ring Bearing | Maximum Speed:3310 rpm; Bolt Size:2 x 3/4; Support Type:Two-Bolt Plummer Blo; Bearing Type:Split Cylindrical Re; Housing Width:4.4 in; Cr - Dynamic Load Rating:31041 lbf; Seal Type:Kevlar Packing Seal; Cor - Static Load Rating:36179 lbf; Bearing UPC:013992026149; Bearing Number:LSE300BR; |
| 12-201091/1-02272 Slewing Bearing With Internal Gear 984/1166/56mm | Dynamic Load Rating (Cr):5,800; Max. housing corner radius, or 45 deg. chamfer (ch):0.300; Weight (g):8.00; Max. shaft corner radius, or 45 deg. chamfer (ch1):0.300; Outer Diameter (mm):16; Bore Dia (d):5.0000; Brand:AST; Inner Width (Bi):9.0000; Bearing Type - high mis-alignment:high misalignment; Outer Dia (D):16.0000; |
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
16344001 External Gear Slewing Ring Bearings (63.15*47.84*5.118inch) For Wind Turbines Video