| No. | Brand | b | B | e | f | m | s | Q | X |
| 18mm | - | - | - | - | - | - | - | - | - |
| 15mm | INA | - | 38,1 mm | - | - | - | - | - | - |
| 90 | - | - | 45 mm | - | - | - | - | - | - |
| 100% | - | - | - | - | - | - | - | - | - |
| 6226ZZSC3 | NSK | - | 436 mm | - | - | - | - | - | - |
| 320 | - | - | 236 mm | - | - | - | - | - | - |
| 1mm | - | - | - | - | - | - | - | - | - |
| 5.2m | - | - | - | - | - | - | - | - | - |
| 6205ZZNR | NSK | - | - | - | - | - | - | - | - |
| GS-030061-00440 | Rexroth | - | - | - | - | - | - | - | - |
| PC450-8 | - | - | - | - | - | - | - | - | - |
| 4 | - | - | 18 mm | - | - | - | - | - | - |
| T6CC | - | - | 58 mm | - | - | - | - | - | - |
| F3S2E32E, | Rexnord | - | 19 mm | - | - | 0,376 kg / Weight | - | - | - |
| 3mm/3.2mm/4mm/6mm/9mm/12mm/15mm/18mm | - | - | - | - | - | - | - | - | - |
| k2 | - | - | - | - | - | - | - | - | - |
| SL18 | - | - | - | - | - | - | - | - | - |
| 6312-2NSE | Nachi | - | 37 mm | - | - | - | - | - | - |
| 804312A | - | - | - | - | - | - | - | - | - |
| N2o | - | - | 35 mm | - | - | - | - | - | - |
| 37230-29055 | - | - | - | - | - | - | - | - | - |
| MP-02A-22 | DAIKIN | - | - | - | - | - | - | - | - |
| GRRY20-VA | INA | - | - | - | - | - | - | - | - |
| Factory-12mm | - | - | - | - | - | - | - | - | - |
| 71816C.T.P4A | - | - | - | - | - | - | - | - | - |
| XT600 | - | - | - | - | - | - | - | - | - |
| 10Pcs | - | - | - | - | - | - | - | - | - |
| 90-200541/0-07023 Four-point Contact Ball Slewing Bearing 435x647x56mm | Dimension L:8.65 in; Y1 - Geometry Factor:3.14; Dimension N:3.55 in; Grease Lubrication - M/N Seal:1500 rpm; Dimension G:1.56 in; Oil Lubrication - B/C/O Seal:1200 rpm; Pre Install Clearance Max:0.120 mm; Dimension RV:0.09 in; Float:0.08 in; Oil Lubrication - T Seal:2650 rpm; |
| 9E-1B20-0288-1072 Slewing Bearing With External Gear Teeth 207.9x373.1x50mm | Basic dynamic load rating C:33.2 kN; overall length/diameter:160 mm; Pilot Configuration:With Pilot; Bore:1.772 Inch | 45 Mill; locking device:Set Screw; expansion type:Non-Expansion Bearin; bolt size:16 mm; RG:1/4-28 UNF; overall height:40.2 mm; A1:38 mm; |
| MTE-470T External Gear Slewing Ring Bearings (26.9*18.5*2.375inch) For Truck-mounted Cranes | Width (mm):17; d:35 mm; r min.:1,1 mm; Angle (α):40 °; Bearing number:7207B; Size (mm):35x72x17; (Grease) Lubrication Speed:9300 r/min; B:17 mm; Outer Diameter (mm):72; Basic static load rating (C0):18,4 kN; |
| Large Stocks XA 282304N Slewing Bearing 2190*2493.4*110mm | ℓ:60,3 Tolerance h14; Basic dynamic load rating (C):65,5 kN; Basic static load rating (C0):56 kN; Brand:NSK; C:34 mm; Bore Diameter (mm):40; B:36 mm; Width (mm):36; r2 min.:2,6 mm; b:18 mm; |
| 92-321355/1-06255 Slewing Bearing With Internal Gear 1212/1500/90mm | Inventory:0.0; Bore Diameter (mm):150; C:100 mm; Bearing number:24130CE4; Calculation factor (Y0):1,7; D:250 mm; Size (mm):150x250x100; Z_:21; Da min:212 mm; (Oil) Lubrication Speed:1400 r/min; |
| 9E-1Z30-0980-16 Crossed Roller Slewing Rings 868/1144/100mm | Dimension B2:0.531 in; Dimension S1:26.9 mm; Set Screw Size:1/4-20; Dimension M:0.142 in; Center of Bearing from End S:17.5 mm; Weight:0.50 lb; Sub Series:G1…KPPB2,3,4; Outside Diameter D:2.047 in; Material:Bearing Steel; Number of Set Screws:2; |
| RKS.22.1091 L-shape Range Internal Gear Slewing Ring Bearing(1198*986*56mm) For Bending Robot | D:72 mm; C:35 mm; Basic static load rating (C0):130 kN; Size (mm):60x72x35; Bore Diameter (mm):60; Width (mm):35; Basic dynamic load rating (C):55 kN; Fw:60 mm; Outer Diameter (mm):72; Bearing number:NK 60/35; |
| L-shape Slewing Bearing Without Gear RKS.23 0641 | Weight:1,8 Kg; Bearing number:T2EE060; B:39 mm; a:27,6 mm; D:115 mm; d:60 mm; Brand:CX; Bore Diameter (mm):60; Outer Diameter (mm):115; C:33 mm; |
| Supply VA400845N Slewing Bearing 730*1008*87mm | Outside Diameter:0.433 Inch | 11 Mill; Inch - Metric:Metric; Long Description:8MM Bore; 11MM Outsi; Rolling Element:Needle Roller Bearin; Weight / LBS:0.004; UNSPSC:31171512; nB:30500 1/min / Refere; Inventory:0.0; Keyword String:Needle; Enclosure:Not Applicable; |
| SD.716.20.00.B Light Type No Gear Slewing Ring(716*572*56mm) For Farm Machinery | d:60,325 mm; C:63,5 mm; T:79,375 mm; R:2,3 mm; Bore Diameter (mm):60,325; Width (mm):79,375; Brand:Timken; D:123,825 mm; r:1,5 mm; Size (mm):60.325x123.825x79.37; |
| Crossed Roller Slewing Bearing With Internal Gear RKS.211430101001 | Limiting Speed - Grease:2,600 rpm; Cy:8.4 mm; Configuration:Double Row; Radial Clearance:0.030 to 0.058 mm; Dx:185 mm; Enclosure:Snap Ring Groove wit; Dynamic Load Rating:149,000 N; Fillet Radius/Chamfer:2.1 mm; da:107 mm; d:95 mm; |
| DH340 Excavator DAEWOO Double Row Sleiwng Bearing 1543*1235*132mm | Outer Diameter (mm):150; D:150 mm; Brand:ISB; B:20 mm; r min.:0,6 mm; Width (mm):20; dh:140 mm; Weight:1,45 Kg; Bearing number:CRBH 10020 A; ds:110 mm; |
| HT10-30E1Z External Gear Slewing Ring Bearings (35.84*24*3.5inch) For Jib Cranes | Size (mm):17x35x10; C:10 mm; Basic static load rating (C0):2,45 kN; Basic dynamic load rating (C):5,59 kN; Width (mm):10; D1:29,3 mm; a:11 mm; Da max.:33 mm; D:35 mm; rb max.:0,15 mm; |
| RKS.061.20.0414 Bearing | Outer Race Width:0.354 Inch | 9 Milli; Product Group:B00308; ALPHA_:0; Bore:0.591 Inch | 15 Mill; Rolling Element:Ball Bearing; Category:Single Row Ball Bear; yobi:6002ZZ; B_:9; da min.:17 mm; KBRG:6141; |
| E.1100.32.00.C External Flange Slewing Ring Gear Bearing(1098*805*90mm) For Clarifier | Brand:Timken; Weight:0,016 Kg; Bore Diameter (mm):21; Ew:27 mm; Basic dynamic load rating (C):14,1 kN; Fw:21 mm; Bearing number:K21,1X27,1X13BE; Outer Diameter (mm):27; Bc:13 mm; |
| VU200220 Bearing 138*302*46mm | m:0,948 kg / Weight; Product Group:B04270; Component Description:Roller Assembly Plus; Weight / Kilogram:0; Ca:16800 N / Dynamic lo; Inventory:0.0; C0a:3600 lbf / Static lo; UNSPSC:31171552; T:25,4 mm; Category:Thrust Ball Bearing; |
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
16340001 External Gear Slewing Ring Bearings (33.627*26.535*2.205inch) For Wind Turbines Video