| No. | Brand | b | B | e | f | m | s | Q | X |
| 23044CCK/W33 | - | - | 67 mm | - | - | - | - | - | - |
| Q235 | - | - | - | - | - | - | - | - | - |
| NUP2320 | NSK | - | 8 mm | - | - | - | - | - | - |
| 6D102 | - | - | - | - | - | - | - | - | - |
| 21%N | - | - | 7,92 mm | - | - | - | - | - | - |
| 6005 | - | - | 80 mm | - | - | - | - | - | - |
| CS607 | INA | - | 18 mm | - | - | - | - | - | - |
| hyk2068 | - | - | - | - | - | - | - | - | - |
| RA19013 | thk | - | - | - | - | - | - | - | - |
| LPVD45 | - | - | - | - | - | - | - | - | - |
| 155-800rpm | - | - | - | - | - | - | - | - | - |
| PE40-XL | INA | - | 365 mm | - | - | - | - | - | - |
| 22320-E1-XL-K-C2 | fag | - | 9,525 mm | - | - | - | - | - | - |
| SK045 | - | - | 325 mm | - | - | - | - | - | - |
| 9105750 | - | - | - | - | - | - | - | - | - |
| 220g | - | - | - | - | - | - | - | - | - |
| HSR20 | thk | - | 18 mm | - | - | - | - | - | - |
| 5 | - | - | 49 mm | - | - | - | - | - | - |
| 2-4mm | - | - | - | - | - | - | - | - | - |
| 6908-ZZ | - | - | 31 mm | - | - | - | - | - | - |
| 46% | - | - | - | - | - | - | - | - | - |
| (2N-BT53603) | NTN | - | - | - | - | - | - | - | - |
| 6 | - | - | - | - | - | - | - | - | - |
| E385 | - | - | 22 mm | - | - | - | - | - | - |
| CAT320C Excavator CATERPILLAR Double Row Slewing Bearing 1316*1081*105mm | Dimension B:11.09 in; Engineering Group:Mounted Bearing; Dimension F:17.50 in; Weight:136 lb; Dimension SVV:7.02 in; Dimension RVV:0.99 in; Shaft Tolerance:0.0050 in; Pre Install Clearance Max:0.0067 in; Oil Lubrication - T Seal:1500 rpm; Eng Internal Radial Clearance - Min:0.0053; |
| MTE-705 External Gear Slewing Ring Bearings (38.201*27.75*2.875inch) For Truck-mounted Cranes | Ea:26,6 mm; B1:2,8 mm; Basic dynamic load rating (C):7,8 kN; Size (mm):17x30x2.8; Eb:19 mm; Bore Diameter (mm):17; D:30 mm; Basic static load rating (C0):22 kN; Weight:0,008 Kg; Brand:Timken; |
| RB1250110UUC0 PE5 Cross Roller Bearing | Weight (g):152.00; Static Load Rating (Cor):240,000; Bearing number:GEG20ES-2RS; Bore Dia (d):20.0000; Bore Diameter (mm):20; Spherical Diameter (dk or Dk):35.500; Max. shaft corner radius, or 45 deg. chamfer (ch1):0.300; Dynamic Load Rating (Cr):48,000; Mis-alignment Angle (a deg.):17; Inner Width (Bi):25.0000; |
| VLA201094 Bearing | I:53,8 mm; Brand:ILJIN; J:14 mm; H:14,5 mm; N:13,5 mm; 1:Wheel Bearing; M:71,933 mm; G:126,8 mm; K:100,13 mm; F:164,75 mm; |
| YRT150-C / YRT150C Rotary Table Bearing 150x240x40mm | Support Type:Four-Bolt Plummer Bl; Bearing Number:LSM240BR; Shaft Size:240 mm; Cr - Dynamic Load Rating:167258 lbf; Bearing Type:Split Cylindrical Re; Ca - Axial Load Rating:12994 lbf; Dimension K:160 mm; Maximum Speed:820 rpm; Seal Type:High Temperature Pac; Pillow/Plummer Block Style:Split Cylindrical Ho; |
| L6-29N9ZD Slewing Rings(33.39*25.6*2.2inch) With Internal Gears For Excavators And Ladle Turrets | Brand:CX; Compatibility:MITSUBISHI / GALANT; Bearing number:CX139; |
| 260DBS208y Slewing Bearing | Brand:INA; V:70,002 mm; A:29,007 mm; B:43,688 mm; Bore Diameter (mm):19.05; d3:32,995 mm; Thread (Q) - 1/4-28 UNF:1/428 UNF; Bearing number:RCJ3/4; A1:11,506 mm; J:63,5 mm; |
| L4-13P9Z No Gear Slewing Rings(15.79*9.17*1.58inch) For Stackers And Reclaimers | D:17 mm; Fw:9 mm; Bearing number:RNA497; Width (mm):10; C:10 mm; (Grease) Lubrication Speed:20000 r/min; Basic dynamic load rating (C):3,6 kN; Outer Diameter (mm):17; Basic static load rating (C0):3,65 kN; Bore Diameter (mm):9; |
| 134.32.800 Slewing Bearing 636x964x182mm | Bore Diameter (mm):110; Weight:5,5 Kg; Brand:INA; Outer Diameter (mm):160; da max:124 mm; Size (mm):110x160x110; Width (mm):110; Angle:4 °; Basic dynamic load rating (C):655 kN; D:160 mm; |
| MTE-210 External Gear Slewing Ring Bearings (14.686*8.268*1.575inch) For Truck-mounted Cranes | Bore Diameter (mm):50; C:12 mm; a:27,1 mm; Brand:CX; Basic dynamic load rating (C):8,7 kN; Basic static load rating (C0):10,4 kN; Size (mm):50x65x12; B1:12 mm; Bearing number:3810-2RS; Outer Diameter (mm):65; |
| XRB1000110 Cross Roller Bearing Size 1000x1250x110mm | r min.:1,1 mm; d:170 mm; Brand:CYSD; Bore Diameter (mm):170; Bearing number:6834-Z; Weight:1,86 Kg; C:22 mm; Basic dynamic load rating (C):60 kN; Width (mm):22; Outer Diameter (mm):215; |
| 1799/1070 Slewing Bearing 1070x1416x115mm | Size (mm):280x500x130; Calculation factor (e):0,28; Bore Diameter (mm):280; Basic dynamic load rating (C):2010 kN; Bearing number:22256-MB-W33; Outer Diameter (mm):500; Limiting speed:1500 r/min; Width (mm):130; d:280 mm; Calculation factor (Y1):2,4; |
| 1230DBS203t Four-point Contact Ball Slewing Bearing With External Gear | Dimension D:0.31 in; UPC Code:0883450024907; Bearing Number:22220; Float:0.083 in; Eng Internal Radial Clearance - Max:0.0047; Dimension G:4.140 in; Dimension SAA:5.94 in; Grease Lubrication - B/C/O Seal:900 rpm; Grease Lubrication - M/N Seal:1200 rpm; Dimension L Fix:5.05 in; |
| VSU251055 Bearing 955*1155*63mm | Width (mm):25,4; d:254 mm; C0r:82000 N / Static loa; Outer Diameter (mm):304,8; D2:291,7 mm; Bore Diameter (mm):254; Bearing number:CSEG100; Cr:52000 N / Dynamic lo; B:25,4 mm; |
| R9-63E3 Outer Gear Cross Roller Slewing Bearings(70.629*57.72*3.15inch) For Lift Truck Rotators | Outer Diameter (mm):136,525; C:53,975 mm; Bearing number:495-S/493D+X1S-495-S; R:3,5 mm; Size (mm):71.438x136.525x69.85; r:0,8 mm; Width (mm):69,85; Brand:Timken; d:71,438 mm; T:69,85 mm; |
| 3R16-220E1 External Gear Heavy Duty Slewing Ring Bearing(236.976*210.04*10.55inch) For Heavy Duty Cranes | d:400 mm; Width (mm):250; Size (mm):400x650x250; B2:28 mm; Bore Diameter (mm):400; Bearing number:24180 K30CW33+AH2418; d1:380 mm; B:250 mm; D:650 mm; B1:20 mm; |
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
16335001 Internal Gear Slewing Ring Bearings (121.496*97.717*6.772inch) For Tunnel Boring Machines Video