| No. | Brand | b | B | e | f | m | s | Q | X |
| 688ZZ | NSK | - | - | - | - | - | - | - | - |
| a6vm | - | - | 114 mm | - | - | - | - | - | - |
| E345C | - | - | 28 mm | - | - | - | - | - | - |
| 6005 | - | - | 9,525 mm | - | - | - | - | - | - |
| A2FM23 | - | - | - | - | - | - | - | - | - |
| 31.8 | - | - | - | - | - | - | - | - | - |
| 6001ZZ | Nachi | - | 13 mm | - | - | - | - | - | - |
| 45bwd03 | - | - | - | - | - | - | - | - | - |
| EX120-2 | Hitachi | - | 20 mm | - | - | - | - | - | - |
| 2-25mm | - | - | - | - | - | - | - | - | - |
| 400 | - | - | 74 mm | - | - | - | - | - | - |
| M36 | - | - | - | - | - | - | - | - | - |
| NJ414-M1 | fag | - | - | - | - | 3,22 kg / Weight | - | - | - |
| NU2334MA/C3 | SKF | - | - | - | - | - | - | - | - |
| 1220*2440mm | - | - | - | - | - | - | - | - | - |
| 46% | - | - | - | - | - | - | - | - | - |
| mdd090c-n-040-n2l-110ga0 | Rexroth | - | 24,5 mm | - | - | - | - | - | - |
| 227g | INA | - | - | - | - | - | - | - | - |
| UCFS307 | Asahi | - | - | - | - | - | - | - | - |
| UC308 | NTN | - | - | 2 mm | - | - | - | - | - |
| PC1250-7 | - | - | - | - | - | - | - | - | - |
| NJ216MY | Nachi | - | - | - | - | - | - | - | - |
| S3508.2RSR.C3 | fag | - | 14 mm | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| NJ322 | NSK | - | 20 mm | - | - | - | - | - | - |
| 09262-35108-000 | - | - | - | - | - | - | - | - | - |
| SSF0751/22CHHⅡ Slewing Bearing For 5T Excavator Machine | Bore Diameter (mm):45; Bearing number:SA45ET-2RS; h:163 mm; Thread (G):M42×3; d2:102 mm; d:45 mm; l7 min.:52 mm; Basic dynamic load rating (C):225 kN; l2 max.:214 mm; dk:60 mm; |
| VA140188-V Slewing Ring Bearing(259*135*35mm)for Handling Manipulator | da min.:27.6 mm; Category:Single Row Ball Bear; Basic static load rating C0:7.65 kN; da max.:32 mm; Cage Material:Steel; D2 ≈:44 mm; Inner Race Width:0 Inch | 0 Millimete; Enclosure Type:Contact Seal; Product Group:B00308; Outer Race Width:0.551 Inch | 14 Mill; |
| XU080149 Cross Roller Slewing Ring Bearing For Machine Tools | Bolt (G):M10; S:8 mm; Basic static load rating (C0):11,3 kN; A:19 mm; f0:13.9; B:30 mm; Weight:0,62 Kg; C0r:11.3; Cr:19.5; J:90,5 mm; |
| Slewing Bearing XSI 140414 N 325*484*56mm | Bearing number:32305A; ra max.:1 mm; (Grease) Lubrication Speed:6 700 r/min; Db min.:57 mm; T:25,25 mm; D:62 mm; Calculation factor (Y):2; Calculation factor (e):0,3; Da min:53 mm; C:20 mm; |
| SH60-1 Excavator SUMITOMO Three Row Slewing Bearing 765*562*97mm | Outer Diameter (mm):12,7; Basic static load rating (C0):0,49 kN; Basic dynamic load rating (C):1,43 kN; Weight:0,005 Kg; d:4,762 mm; D:12,7 mm; B:3,96 mm; Bore Diameter (mm):4,762; C:3,96 mm; Bearing number:A33KDD5; |
| VI160288 Bearing 216*340*39mm | Dynamic Load Rating:465,000 N; ra (max):2.5 mm; dc (min):171 mm; d:140 mm; Configuration:Single Row; Fillet Radius/Chamfer:3 mm; Radial Clearance:0.060 to 0.105 mm; Da (max):236 mm; r1:3 mm; dd (min):182 mm; |
| EX200-3 Excavator HITACHI Double Row Slewing Bearing 1312*1083.5*106mm | Da - Outer Ring Backing Diameter:940.000 mm; e - ISO Factor3:0.29; Design Unit:METRIC; C0 - Static Radial Rating:21200000 N; C1(2) - Dynamic Radial Rating (Two-Rows):11700000 N; Bearing Weight:1056.300 Kg; Reference Thermal Speed Rating (Oil)7:260; Bore Taper:1/12; D:1030.000 mm; Y2 - ISO Factor6:2.25; |
| 131.50.3550 Slewing Bearing 3268x3832x270mm | Weight:0,376 Kg; S:18,3 mm; P:17,78 mm; Width (mm):36,51; Bore Diameter (mm):30; F1:52,53 mm; B2:15,9 mm; Size (mm):30x62x36.51; D:62 mm; C:16 mm; |
| RU42 Crossed Roller Bearing 20x70x12mm | D:112,712 mm; T:30,162 mm; B:30,162 mm; d:63,5 mm; Bore Diameter (mm):63,5; Outer Diameter (mm):112,712; a:6,6 mm; Size (mm):63.5x112.712x30.162; C:23,812 mm; Width (mm):30,162; |
| CRB600120 Bearing | r1 min.:0,15 mm; Weight:0,021 Kg; D:30 mm; Basic static load rating (C0):0,845 kN; C:7 mm; r min.:0,3 mm; Basic dynamic load rating (C):4,4 kN; ra max.:0,3 mm; Da max.:28 mm; Outer Diameter (mm):30; |
| XA120235 Bearing 171*318.8*40mm | Series:09000; db - Cone Backface Backing Diameter:22.10 mm; Da - Cup Frontface Backing Diameter:44.50 mm; Cg - Geometry Factor:0.0452; B:23.020 mm; Y - ISO Factor9:2.26; K - Factor7:2.2; Design Units:Imperial; Ab - Cage-Cone Frontface Clearance:1.5 mm; Bearing Weight:0.20 Kg; |
| SD.1100.32.00.C Flange Light Type Slewing Ring Gear(1100*805*90mm) For Truck Trailer | Dimension N:14.875 in; Dimension V:0.1 in; Bearing - Housing - Seal:MSE504BRHRSS; Support Type:Round Flange; Note:This product line wa; Series Type:Medium Series; Dimension P:1.0 in; Bearing Type:Split Cylindrical Re; Dimension T:20.0 in; Seal Type:Viton Single Lip; |
| 300DBS202y Slewing Bearing | C:22,225 mm; Outer Diameter (mm):95,25; T:30,958 mm; Bore Diameter (mm):44,45; Size (mm):44.45x95.25x30.958; B:28,575 mm; D:95,25 mm; Brand:ISO; d:44,45 mm; a:0,5 mm; |
| E.1000.25.00.B External Gear Slewing Ring Bearing(997*755*80mm) For Loader Cranes | Outer Diameter (mm):87,312; Basic static load rating (C0):134 kN; B:30,886 mm; Width (mm):30,162; Bore Diameter (mm):45,237; D:87,312 mm; T:30,162 mm; Basic dynamic load rating (C):105 kN; Brand:CX; (Grease) Lubrication Speed:4400 r/min; |
| I.955.25.00.B Internal Gear Slewing Bearing(955*710*80mm) For Concrete Pump And Fire Ladder | F:92,2 mm; Outer Diameter (mm):150; Basic dynamic load rating (C):104 kN; C:37 mm; Bearing number:GNE70-KRRB; L:75,4 mm; S:6 mm; Size (mm):70x150x58; D:150 mm; Weight:4,37 Kg; |
| MMXC10/500 Crossed Roller Bearing | Size (mm):203.2x317.5x63.5; Da max.:305 mm; r1 min.:3,2 mm; Width (mm):63,5; r min.:7,9 mm; D:317,5 mm; T:63,5 mm; Calculation factor (e):0,52; ra max.:7,9 mm; rb max.:3,2 mm; |
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
16301001 Internal Gear Slewing Ring Bearings (102.5*85.36*7.44inch) For Utility Derricks Video