| No. | Brand | b | B | e | f | m | s | Q | X |
| 16 | - | - | - | - | - | - | - | - | - |
| DKS15BH | - | - | - | - | - | - | - | - | - |
| 10043-01-3 | - | - | - | - | - | - | - | - | - |
| 30x72x20.75 | - | - | - | - | - | - | - | - | - |
| 6905 | - | - | 50,8 mm | - | - | - | - | - | - |
| (1220*2440) | - | - | 45 mm | - | - | - | - | - | - |
| 2 | SKF | - | 13 mm | - | - | - | - | - | - |
| 1/2 | - | - | 17 mm | - | - | - | - | - | - |
| 1965-1968 | Timken | - | - | - | - | - | - | - | - |
| 50 | - | - | 21,5 mm | - | - | - | - | - | - |
| 6001Z | SKF | - | - | - | - | - | - | - | - |
| 4FT | - | - | - | - | - | - | - | - | - |
| Sk200-6/230-6e | - | - | 25 mm | - | - | - | - | - | - |
| 24130-BS-C3 | fag | - | 35 mm | - | - | - | - | - | - |
| SR16UU | Nippon | - | - | - | - | - | - | - | - |
| Pvp2-30-70 | - | - | - | - | - | - | - | - | - |
| FZR750 | - | - | 25,4 mm | - | - | - | - | - | - |
| 7 | - | - | 167 mm | - | - | - | - | - | - |
| 2x | TRW | - | 100 mm | - | - | - | - | - | - |
| 7411 | fag | - | - | - | - | - | - | - | - |
| PC800 | INA | - | 11,000 mm | - | - | - | - | - | - |
| 534176 | - | - | 46 mm | - | - | - | - | - | - |
| 6411 | SKF | - | - | - | - | - | - | - | - |
| 6 | - | - | 16,764 mm | - | - | - | - | - | - |
| 318R-BKE | - | - | - | - | - | - | - | - | - |
| 1160X2400X28mm | - | - | 7 mm | - | - | - | - | - | - |
| SD.1600.32.00.C Flange Light Type Slewing Ring Gear(1600*1305*90mm) For Truck Trailer | rn:0,3 mm; f:0,85 mm; da max:33 mm; Cz:0,9 mm; a:1,3 mm; Size (mm):30x42x7; r min.:0,3 mm; Width (mm):7; Dx:45,5 mm; |
| 01-1712-00 External Gear Slewing Ring Bearing(1929*1565*110mm)for Construction Machinery | Size (mm):25x32x32; Outer Diameter (mm):32; Basic static load rating (C0):49,5 kN; Weight:0,119 Kg; Fw:25 mm; Bearing number:RNAO-25×37×32ZW; Bore Diameter (mm):25; D:37 mm; ra max.:0,3 mm; Basic dynamic load rating (C):33,5 kN; |
| YRTC180-XL / YRTC180XL Rotary Table Bearing 180x280x43mm | Bearing number:PSHEY35-N; L:35 mm; d:35 mm; B:45 mm; Thread (G):R1/8“; M:82,6 mm; Brand:NKE; O:25,5 mm; B1:27 mm; Width (mm):45; |
| VSI200644-N Slewing Ring Bearing(716*546*56mm)for Manipulator | Da - Cup Frontface Backing Diameter:11.84 in; Y - ISO Factor4:1.15; D:12.5000 in; Design Units:Imperial; e - ISO Factor3:0.52; Cup Part Number:93125-B; C - Cup Width:1.8125 in; Series:93000; C1 - Cup Flange Width:0.4375 in; Cg - Geometry Factor5:0.146; |
| VA400560N Slewing Bearing 464*708*87mm | Fw:22,000 mm; Bearing number:K22X26X10; Lw:7.8 mm; Dw:2 mm; Min operating temperature, Tmin:-20 °C; Bore Diameter (mm):22,000; Category:Bearings; Weight / Kilogram:0.012; Characteristic cage frequency, FTF:0.46 Hz; C0r:11.9 kN; |
| 3R10-111N2F Internal Gear Heavy Duty Slewing Ring(119.5*98.4*8.75inch) For Climbing Cranes And Tower Cranes | Outer Diameter (mm):145; b:2,5 mm; Basic dynamic load rating (C):34 kN; da min.:104 mm; (Grease) Lubrication Speed:13400 r/min; d:95 mm; Basic static load rating (C0):33 kN; Da max.:136 mm; Size (mm):95x145x24; Width (mm):24; |
| 06-2500-01 External Gear Slewing Ring Bearing(2790*2290*164mm)for Construction Machinery | D:120 mm; Weight:1,14 Kg; da min.:95 mm; Width (mm):36; Basic static load rating (C0):244,2 kN; F:100 mm; Size (mm):90x120x36; Bearing number:NKI 90/36; r min.:1 mm; da max:98 mm; |
| 1787/600G Slewing Bearing 600x798x72mm | M:5,13 mm; B1:77,8 mm; B2:22,2 mm; Width (mm):61,91; L:6,4 mm; G:31 mm; d1:84,1 mm; Brand:Timken; Outer Diameter (mm):110; Weight:2,03 Kg; |
| Crossed Roller Slewing Bearing RKS.160.16.1534 | Rolling Element:Ball Bearing; d1:62.75 mm; db - min.:57 mm; Ball - z:21; D1:72.3 mm; Cage Material:Phenolic; Calculation factor - fHC:1; EAN:7316571590707; Preload class B GB:250 N; |
| RK6-25E1Z External Gear Slewing Ring Bearings (29.15*21.03*2.205inch) For Stretch Wrapping Machines | outside diameter:265 mm; da min.:55 mm; closure type:Open; Manufacturer Item Number:7420 CBM; r3,4 min.:4 mm; EAN:7316570021820; Internal Clearance:CB; Weight / Kilogram:17.68; Db max.:235 mm; Calculation factor Y0:0.52; |
| 132.25.560 Slewing Bearing 426x694x148mm | Material:Wrapped bronze with; Shaft Dia., Nominal (d):80.0000; Bearing Type:flanged; Bearing Bore after Mounting (di) - 80 +0.074 / -0:80 +0.074 / 0; Bearing Length, Nominal (B):40.000; Wall Thickness (S3):2.500; Flange Dia. (Dfl pm 0.5):100.000; Brand:AST; ID Chamfer Length (Ci):0.600; Housing Bore Dia. (Dh) - 85 +0.035 / -0:85 +0.035 / 0; |
| STM2000/32CHH Slewing Bearing For 220T Truck Crane | Basic dynamic load rating (C):41,8 kN; Weight:0,19 Kg; Outer Diameter (mm):72; Width (mm):25; Bore Diameter (mm):60; D:72 mm; Size (mm):60x72x25; C:25 mm; Brand:CX; Fw:60 mm; |
| Cross Roller Bearing RU Series RU66UUCC0 | Angle:6 °; B:49 mm; Weight:1,55 Kg; r2 min.:1 mm; Width (mm):49; dk:92 mm; Size (mm):70x105x49; Basic dynamic load rating (C):313 kN; d:70 mm; Brand:ZEN; |
| Low Price XA 140969N Slewing Bearing 890*1086.1*60mm | Shaft Size:2-11/16 in; Bearing Number:MSE211BR; Note:This product line wa; Bearing UPC:013992031976; Dimension B:7.5 in; Dimension S:2.0 in; Dimension H:1.6 in; Dimension P:0.9 in; Support Type:Take-Up; Cr - Dynamic Load Rating:58001 lbf; |
| 16299001 Internal Gear Slewing Ring Bearings (72.5*57*6inch) For Utility Derricks | Z:95 mm; Fi:826 mm; Bearing number:ZB2.22.0885.400-1SPP; V:21 mm; Width (mm):97; m:8 mm; Ht:97 mm; Size (mm):754x982x97; N:36 mm; d:754 mm; |
| 06-2810-09 External Gear Slewing Ring Bearing(3116*2600*164mm)for Construction Machinery | Outer Diameter (mm):80; C:21 mm; Bearing number:1680207; B:36 mm; D:80 mm; Width (mm):36; Bore Diameter (mm):35; Brand:CRAFT; Size (mm):35x80x36; d:35 mm; |
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
MTE-145X External Gear Slewing Ring Bearings (12.286*5.709*1.968inch) For Truck-mounted Cranes Video