| No. | Brand | b | B | e | f | m | s | Q | X |
| 4WD | - | - | 5 mm | - | - | - | - | - | - |
| 2.2mm | - | - | 112 mm | - | - | - | - | - | - |
| 15mm | INA | - | 15,5 mm | - | - | - | - | - | - |
| 71315SN2ENM5N0H111C2 | Parker | - | - | - | - | - | - | - | - |
| CR808HPN030; | - | - | - | - | - | - | - | - | - |
| 62301-2RS1 | SKF | - | - | - | - | - | - | - | - |
| 607 | - | - | - | - | - | - | - | - | - |
| SY460 | INA | - | 20 mm | - | - | - | - | - | - |
| NU2334EX.M1 | - | - | - | - | - | - | - | - | - |
| qt52-040r | Rexroth | - | - | - | - | - | - | - | - |
| 6310 | NSK | - | 27 mm | - | - | - | - | - | - |
| 60cbm | - | - | - | - | - | - | - | - | - |
| DX300 | - | - | - | - | - | - | - | - | - |
| 32014 | koyo | - | 4,763 mm | - | - | - | - | - | - |
| K7V63 | - | - | 40 mm | - | - | - | - | - | - |
| 100% | - | - | - | - | - | - | - | - | - |
| 2000-2005 | Timken | - | - | - | - | - | - | - | - |
| (3A1001) | - | - | - | - | - | - | - | - | - |
| CPOM2BBN | Parker | - | - | - | - | - | - | - | - |
| 21% | - | - | - | - | - | - | - | - | - |
| (51138M) | - | - | - | - | - | - | - | - | - |
| TRB-1220 | koyo | - | - | - | - | - | - | - | - |
| 1150*730mm | - | 16.7 mm | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 5 | - | - | - | - | - | - | - | - | - |
| 4x | - | - | - | - | - | - | - | - | - |
| 1103KLLG+COL | FAFNIR | - | 2,38 mm | - | - | - | - | - | - |
| 07 0770 00 Slewing Ring Bearing | C:18 mm; Outer Diameter (mm):91; Basic static load rating (C0):24,5 kN; E:91 mm; Basic dynamic load rating (C):23,6 kN; Bearing number:N1013RXHZTP; Brand:NSK; B:18 mm; Width (mm):18; Weight:0,437 Kg; |
| HS6-16E1Z External Gear Slewing Ring Bearings (19.9*12*2.2inch) For Digger Derricks | Ab - Cage-Cone Frontface Clearance:2.3 mm; Aa - Cage-Cone Backface Clearance:0.8 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2250 lbf; db - Cone Backface Backing Diameter:45.97 mm; Da - Cup Frontface Backing Diameter:65.00 mm; da - Cone Frontface Backing Diameter:42.93 mm; D:66.675 mm; a - Effective Center Location3:-1.5 mm; B:15.875 mm; Cg - Geometry Factor:0.0694; |
| E.1200.32.00.C External Flange Slewing Ring Gear Bearing(1200*905*90mm) For Clarifier | D - Bearing O.D.:38.5827 in; R - Fillet Radius Shaft (Max):0.13 in; d1 - Large Bore I.D.:34.252 in; B:1.9685 in; T1 - Ring Thickness:0.560 in; Bearing Type:Thrust Tapered Rolle; H - Shoulder Diameter - Shaft:37.43 in; Weight:116.3 lb; Dynamic Load Rating:109000 lbf; E - Shoulder Diameter - Housing:35.37 in; |
| W13-24P1 High-speed Radial Ball Slewing Ring(31.89*21.654*3.55inch) For Machine Tools | Bore Diameter (mm):500; B:167 mm; D:720 mm; C:167 mm; Width (mm):167; d:500 mm; Size (mm):500x720x167; Outer Diameter (mm):720; Brand:ISO; Bearing number:NN30/500 K; |
| 124.40.2000 Slewing Bearing 1825x2178x112mm | D:48 mm; C:24 mm; Bearing number:BK384824; Size (mm):38x48x24; Weight:0,0881 Kg; Basic static load rating (C0):55,5 kN; Outer Diameter (mm):48; Basic dynamic load rating (C):32,2 kN; Fw:38 mm; Width (mm):24; |
| 124.28.900 Slewing Bearing 778x1022x82mm | T:17 mm; S:2 mm; Z:62 mm; R:33 mm; L:31 mm; A:100 mm; M:78 mm; P:2 mm; d:20 mm; U:21,5 mm; |
| 16305001 External Gear Slewing Ring Bearings (9.5*4.813*1.344inch) For Log Loaders And Feller Bunchers | Weight:47,9 Kg; Outer Diameter (mm):380; r1 min.:4 mm; Size (mm):180x380x75; r4 min.:4 mm; r2 min.:4 mm; d1:250,5 mm; D:380 mm; D1:319,4 mm; S:6,1 mm; |
| 1235DBS102y Four-point Contact Ball Slewing Bearing With Innter Gear | Width (B):37.0000; Bore Center to End of Rod (h):110.000; Rod End Width (d2):70.000; Brand:AST; Bearing Type - steel-on-bronze:steelonbronze; Rod Overall Length (l2):145.000; Mis-alignment Angle (a deg.):17; Thread Length (l1):66.000; Spherical Diameter (dk or Dk):50.800; Material - Body - Carbon steel-zinc plated, Ball - Hardened chrome steel-chrome plated, Liner:Bronze; |
| VSA200744-N Light External Gear Type Slewing Ring Bearing(838*672*56mm)for Industial Automation | d1:44,5 mm; Brand:KOYO; r min.:1 mm; Weight:0,34 Kg; Basic static load rating (C0):11,3 kN; Basic dynamic load rating (C):19,5 kN; C:18 mm; B1:35,7 mm; Width (mm):23,8; Bearing number:SA206-18F; |
| 3R8-79P9 No Gear Heavy Duty Slewing Bearing(85.43*71.65*5.79inch) For Large Industrial Turntables | d:240.000 mm; Superseded Part:26348YMBW33W45AC3; Y0 - ISO Factor4:2.08; B - Inner Ring Width:147 mm; R - Inner Ring To Clear Radius1:4.000 mm; da - Inner Ring Backing Diameter:286.000 mm; Cage Material:Brass; Reference Thermal Speed Rating (Oil)7:690; r - Outer Ring To Clear Radius2:4.000 mm; B - Outer Ring Width:147.000 mm; |
| A22-98P1 No Gear Slewing Bearings(105.75*90.17*5.76inch) For Clarifiers And Thickeners | Outer Diameter (mm):500; B:80 mm; Cr:425000 N / Dynamic l; Size (mm):280x500x80; da min:291 mm; Brand:FAG; d1:356,7 mm; d:280 mm; D:500 mm; Bearing number:6256-M; |
| SD.1100.32.00.C Four-point Contact Ball Slewing Bearing 805mmx1100mmx90mm | T:144 mm; d:240 mm; Width (mm):144; Brand:ISO; Outer Diameter (mm):360; Bearing number:234448; B2:72 mm; B1:36 mm; D:360 mm; Size (mm):240x360x144; |
| CRBC9016 Bearing 90x100x16mm | Weight:0.50 lb; Dimension M:0.219 in; Outside Ring Width C:29.000 mm; Bore Type:Cylindrical bore; Shaft Size d:2 7/8 in; Set Screw Size:M12x1.75; Inner Ring Width B:77.8 mm; O.D. Type:Spherical OD; Lubrication Type:Relubricatable; Sub Series:GY…KRRB; |
| E.1200.25.00.B Slewing Bearing With Outer Gear 955x1198x80mm | Aa - Cage-Cone Backface Clearance:-0.01 in; Cone Part Number:05070XS; d:0.7082 in; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:2710 lbf; Design Units:Imperial; T - Bearing Width across Cones:1.2499 in; Ab - Cage-Cone Frontface Clearance:0.07 in; Cg - Geometry Factor11:0.0448; db - Cone Backface Backing Diameter:1.02 in; Y2 - ISO Factor10:2.82; |
| 50 mm x 110 mm x 27 mm 23 0411 01 Light Series No Gear Slewing Ring(518*304*56mm)for Bending Robot | db (max):57 mm; Configuration:Single Row; r1:2 mm; Static Load Rating:89,000 N; dc (min):60 mm; B:27 mm; Da (max):100 mm; D:110 mm; Limiting Speed - Oil:7,500 rpm; Radial Clearance:0.025 to 0.050 mm; Size (mm):50 mm x 110 mm x 27 mm ; |
| 01 0555 01 Slewing Ring Bearing | D2 ≈:138.4 mm; EAN:7316577297891; Bore Diameter (mm):160; Bearing number:6315-Z; Manufacturer Item Number:6315-Z; Size (mm):160x75x37; Cage Material:Steel; Mass bearing:3.09 kg; ra - max.:2 mm; Manufacturer Name:SKF; |
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
HT10-30E1Z External Gear Slewing Ring Bearings (35.84*24*3.5inch) For Jib Cranes Video