| No. | Brand | b | B | e | f | m | s | Q | X |
| 12-0-4 | - | 50 mm | - | - | - | - | - | - | - |
| 1000 | NTN | - | - | - | - | - | - | - | - |
| 24136 | - | - | 103 mm | - | - | - | - | - | - |
| 12 | - | - | 42 mm | - | - | - | - | - | - |
| 6203-2RS | - | - | - | - | - | - | - | - | - |
| 1 | Parker | - | 7 mm | - | - | - | - | - | - |
| 25pcs | - | - | - | - | - | - | - | - | - |
| F8-16 | - | - | - | - | - | - | - | - | - |
| 700g/Roll | - | - | - | - | - | - | - | - | - |
| (MH-1) | - | - | - | - | - | - | - | - | - |
| T2DA14-2NSA1-B75-2BA | Parker | - | - | - | - | - | - | - | - |
| 6307ZZE | Nachi | - | - | - | - | - | - | - | - |
| 315cc-100-cc | - | - | - | - | - | - | - | - | - |
| 6% | - | - | - | - | - | - | - | - | - |
| 1 | - | - | 258 mm | - | - | - | - | - | - |
| TD06H-Garrett | - | - | 12 mm | - | - | - | - | - | - |
| Q9 | - | - | 23 mm | - | - | - | - | - | - |
| 99.5% | - | - | 78 mm | - | - | - | - | - | - |
| NJ322 | NSK | - | 20 mm | - | - | - | - | - | - |
| 1220*2440mm | - | - | - | - | - | - | - | - | - |
| 670X900X170 | - | - | - | - | - | - | - | - | - |
| 16323001 No Gear Slewing Ring Bearings (56.38*46.77*3.82inch) For Military Turrets | Basic dynamic load rating (C):64,6 kN; Bearing number:K50X62X30H,ZB2; (Grease) Lubrication Speed:5800 r/min; Brand:Timken; Bc:30 mm; Fw:50 mm; Weight:0,136 Kg; Ew:62 mm; Bore Diameter (mm):50; Outer Diameter (mm):62; |
| 23 0841 01 Light Series No Gear Slewing Ring(948*734*56mm)for Bending Robot | B1:38 mm; d3:45 mm; Width (mm):38; Basic dynamic load rating C:19.5 kN; Size (mm):62x23.812x38; s1 - ?:22.5 mm; d:23.813 mm; Calculation factor - f0:14; Basic static load rating C0:11.2 kN; d1:23.812 mm; |
| CRBH10020 A UU Bearing | d:85 mm; r1 min.:2 mm; Basic static load rating (C0):200 kN; rb max.:2 mm; da max:98 mm; S:1,5 mm; Brand:SKF; da min.:96 mm; db min:103 mm; Width (mm):28; |
| DH340 Excavator DAEWOO Double Row Sleiwng Bearing 1543*1235*132mm | Outer Diameter (mm):150; D:150 mm; Brand:ISB; B:20 mm; r min.:0,6 mm; Width (mm):20; dh:140 mm; Weight:1,45 Kg; Bearing number:CRBH 10020 A; ds:110 mm; |
| RKS.062.20.1094 Four Point Contact Slewing Bearings(1166*984*56mm) With Internal Gear For Construction And Industry Machines | Dimension X:1.2 in; Shaft Size:80 mm; Dimension H:1.6 in; Series Type:Light Series; Dimension S:2.0 in; Dimension P:0.9 in; Dimension A:7.5 in; Note:This product line wa; Dimension T:14.5 in; Cr - Dynamic Load Rating:42039 lbf; |
| RKS.062.20.0844 Slewing Bearing | Basic dynamic load rating (C):9,2 kN; Width (mm):16; Outer Diameter (mm):19; Bore Diameter (mm):12; r min.:0,3 mm; D:19 mm; Basic static load rating (C0):11,2 kN; Weight:0,0163 Kg; Bearing number:NK12/16; Fw:12 mm; |
| XRB1000110 Cross Roller Bearing Size 1000x1250x110mm | r min.:1,1 mm; d:170 mm; Brand:CYSD; Bore Diameter (mm):170; Bearing number:6834-Z; Weight:1,86 Kg; C:22 mm; Basic dynamic load rating (C):60 kN; Width (mm):22; Outer Diameter (mm):215; |
| NRXT11020DD Crossed Roller Bearing | r1,2 min.:3 mm; Outer Diameter (mm):160; Fatigue load limit Pu:72 kN; Mass bearing:15 kg; Da min.:263 mm; Calculation factor kr:0.12; Da - min.:263 mm; Da - max.:275 mm; D:290 mm; Basic dynamic load rating - C:585 kN; |
| I.650.20.00.C Internal Gear Flange Slewing Bearing(648*445.2*56mm) For Public Works Machinery | Ab - Cage-Cone Frontface Clearance:0.07 in; d:1.5 in; db - Cone Backface Backing Diameter:1.79 in; B - Cone Width:0.8244 in; Cage Type:Stamped Steel; Cg - Geometry Factor:0.0709; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:7640 lbf; G2 - Heat Generation Factor (Rib-Roller End):12.5; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:29500 lbf; C90 - Dynamic Radial Rating (90 million revolutions)5:4390 lbf; |
| RKS.061.20.0544 Bearing | C:23 mm; B:23 mm; Weight:0,57 Kg; d:50 mm; Basic static load rating (C0):7,99 kN; Outer Diameter (mm):90; Basic dynamic load rating (C):22,44 kN; D:90 mm; Brand:ISB; Bearing number:2210-2RSTN9; |
| 130.32.900 Slewing Bearing 736x1064x182mm | r - Cup Frontface To Clear Radius2:0.03 in; db - Cone Backface Backing Diameter:2.72 in; Design Units:Imperial; K - Factor7:1.27; d:2.3622 in; Cg - Geometry Factor11:0.111; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:13200 lbf; Cone Part Number:29582; D:4.4375 in; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:51100 lbf; |
| L6-29N9ZD Slewing Rings(33.39*25.6*2.2inch) With Internal Gears For Excavators And Ladle Turrets | Brand:CX; Compatibility:MITSUBISHI / GALANT; Bearing number:CX139; |
| 07 0849 00 Slewing Ring Bearing | Width (mm):10; r1 min.:0,15 mm; D1:32,5 mm; (Grease) Lubrication Speed:33 700 r/min; Bearing number:7003A5TRSU; D2:33,8 mm; D:35 mm; Basic dynamic load rating (C):6,3 kN; Basic static load rating (C0):3,65 kN; Brand:NSK; |
| 784DBS102y Four-point Contact Ball Slewing Bearing With Innter Gear | Outer Diameter (mm):26; Fw:20 mm; Bearing number:BK2016; C:16 mm; r:1 mm; (Grease) Lubrication Speed:11000 r/min; Bore Diameter (mm):20; Basic dynamic load rating (C):12,4 kN; D:26 mm; Width (mm):16; |
| MTE-210X External Gear Slewing Ring Bearings (14.686*8.268*1.575inch) For Truck-mounted Cranes | D:200 mm; B:45 mm; Basic static load rating (C0):118 kN; d:95 mm; Bearing number:6319-2RS; Width (mm):45; Bore Diameter (mm):95; Weight:5,65 Kg; Outer Diameter (mm):200; Basic dynamic load rating (C):153 kN; |
| 9E-1B14-0188-1029 Slewing Bearing With External Gear Teeth 135x259.36x35mm | d3:98 mm; r1 min.:1 mm; Basic dynamic load rating (C):650 kN; d:50 mm; C:32 mm; Size (mm):50x130x42.5; A:10 mm; S:30 mm; d2:122,5 mm; Outer Diameter (mm):130; |
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
16376001 Internal Gear Slewing Ring Bearings (54.53*41.76*4.72inch) For Stackers And Reclaimers Video