| No. | Brand | b | B | e | f | m | s | Q | X |
| 60x110x22 | - | - | - | - | - | - | - | - | - |
| 12/15/18/21mm | - | - | - | - | - | - | - | - | - |
| 30202 | NSK | - | - | - | - | - | - | - | - |
| 820 | - | - | - | - | - | - | - | - | - |
| 865 | - | - | - | - | - | - | - | - | - |
| 100m3 | - | - | - | - | - | - | - | - | - |
| UCFU-1.3/8M | NTN | - | - | - | - | - | - | - | - |
| 7316b | - | - | - | - | - | - | - | - | - |
| (51138M) | - | - | - | - | - | - | - | - | - |
| 2m | - | - | - | - | - | - | - | - | - |
| FZR750 | - | - | - | - | - | - | - | - | - |
| NKI25/30 | - | - | 119,000 mm | - | - | - | - | - | - |
| 18mm | - | - | 25,654 mm | - | - | - | - | - | - |
| 4312 | - | - | - | - | - | - | - | - | - |
| 100tph | - | - | 4 mm | - | - | - | - | - | - |
| 2 | - | 27,2 mm | - | - | - | - | - | - | - |
| 40X74X40 | - | - | - | - | - | - | - | - | - |
| 4.8mm | - | - | - | - | - | - | - | - | - |
| 60cbm | - | - | - | - | - | - | - | - | - |
| 3-SKF | SKF | - | 108 mm | - | - | - | - | - | - |
| HPV102 | INA | - | - | - | - | - | - | - | - |
| 10 | - | - | - | - | - | - | - | - | - |
| E.505.20.00.B Slewing Bearing With Outer Gear 503.3x342x56mm | d:1320 mm; Size (mm):1600x1320x122; Calculation factor kr:0.015; Calculation factor f0:18; Da max.:1577 mm; D:1600 mm; Outer Diameter (mm):1320; da min.:1343 mm; D1 ≈:1505.46 mm; d1:1414 mm; |
| 10-250955/0-03020 Four-point Contact Ball Slewing Bearing 855mmx1055mmx63mm | Outer Diameter (mm):560,000; Bearing number:4R8403; Size (mm):420x560x280; D:560,000 mm; Brand:NTN; Width (mm):280,000; B:280,000 mm; d:420,000 mm; C:280,000 mm; Bore Diameter (mm):420,000; |
| 16348001 External Gear Slewing Ring Bearings (159.843*141.732*6.142inch) For Wind Turbines | Size (mm):95x170x32; d:95 mm; Width (mm):32; C:32 mm; D:170 mm; Brand:ISO; Bearing number:6219 ZZ; Bore Diameter (mm):95; B:32 mm; Outer Diameter (mm):170; |
| EX60-1 Excavator HITACHI Double Row Slewing Bearing 781*554*78mm | Da max.:192 mm; da min.:155 mm; r min.:2 mm; (Grease) Lubrication Speed:2 100 r/min; Outer Diameter (mm):182; J:177 mm; T1:84 mm; ra1 max.:1 mm; Weight:8,58 Kg; C:42 mm; |
| XSA140844 Bearing 774*950.1*56mm | Inventory:0.0; Enclosure Type:Contact Seal; Bore Diameter (mm):32; Rolling Element:Ball Bearing; Manufacturer Name:SKF; Precision Class:ABEC 1 | ISO P0; Product Group:B00308; Category:Single Row Ball Bear; Enclosure:2 Seals; Other Features:Deep Groove | NBR Se; |
| 12-501800/2-06500 Slewing Bearing With Internal Gear 1554/1971/109mm | Outer Diameter (mm):130; B:25 mm; Size (mm):75x130x25; D:130 mm; Width (mm):25; C:25 mm; d:75 mm; Bearing number:QJ215; Basic static load rating (C0):163 kN; Brand:FBJ; |
| VSA200844-N Light External Gear Type Slewing Ring Bearing(950*772*56mm)for Industial Automation | Y2 - ISO Factor6:2.5; Design Units:Imperial; Da - Cup Frontface Backing Diameter:14.96 in; C - Double Cup Width:4.3125 in; G1 - Heat Generation Factor (Roller-Raceway)7:1450; D:15.5 in; Y - ISO Factor1:1.49; r - Cup Frontface To Clear Radius2:0.06 in; Cg - Geometry Factor8:0.156; Series:275000; |
| Supply VSA250755N Four Point Contact Ball Slewing Bearing 655x898x80mm | C0 - Static Radial Rating:4090 N; Bearing Width:12 mm; do - Ball Diameter:7.143750 mm; Ball Type:Ceramic; r - Outer Ring To Clear Radius3:1.0 mm; R - Inner Ring To Clear Radius2:1.0 mm; Precision Class:ISO P4S (ABEC 7/9); Ce - Dynamic Radial Rating1:10800 N; Limiting Speed (Oil):102800 rpm; Cage Type:CR - Phenolic Outer; |
| MMXC10/500 Crossed Roller Bearing | Size (mm):203.2x317.5x63.5; Da max.:305 mm; r1 min.:3,2 mm; Width (mm):63,5; r min.:7,9 mm; D:317,5 mm; T:63,5 mm; Calculation factor (e):0,52; ra max.:7,9 mm; rb max.:3,2 mm; |
| L6-22N9Z Slewing Rings(25.51*17.6*2.2inch) With Internal Gears For Excavators And Ladle Turrets | C:72,000 mm; Bearing number:6334K; Width (mm):72,000; D:360,000 mm; Bore Diameter (mm):170,000; Brand:NTN; Outer Diameter (mm):360,000; Size (mm):170x360x72; d:170,000 mm; B:72,000 mm; |
| XD.10.0580 Crossed Roller Bearing | da - Cone Frontface Backing Diameter:170.94 mm; Series:107000; B - Cone Width:74.613 mm; a - Effective Center Location3:-15 mm; Cg - Geometry Factor:0.116; Cone Part Number:EE107060V; Db - Cup Backface Backing Diameter:236.98 mm; G2 - Heat Generation Factor (Rib-Roller End):76.3; C0 - Static Radial Rating:263000 lbf; C90 - Dynamic Radial Rating (90 million revolutions)4:54200 lbf; |
| 9E-1Z25-0675-1045 Crossed Roller Slewing Bearing With External Gear 573/838/90mm | Brand:CX; (Grease) Lubrication Speed:5300 r/min; Bore Diameter (mm):40,988; Weight:0,23 Kg; Basic dynamic load rating (C):46,1 kN; T:17,5 mm; C:13,5 mm; B:18 mm; a:3,6 mm; Outer Diameter (mm):67,975; |
| L6-16E9Z Slewing Rings(19.9*11.97*2.2inch) With External Gears For Mining And Forestry Equipment | Material - Drawn cup: Hardened carbon steel alloy, Rollers:52100 Chrome steel o; Brand:AST; Outer Dia (D):2.5000; Bearing Type:Cage Retained Roller; Dynamic Load Rating (Cr):7,000; Max Speed (Grease) (X1000 RPM):5,200; Bore Diameter (mm):53,975; Bearing number:SCE3410; Static Load Rating (Cor):12,700; Width (mm):15,875; |
| YRT80-TN / YRT80TN Rotary Table Bearing 80x146x35mm | Shaft(max.):68.000; Ew:74 mm; Bearing number:K68X74X20FH; (Oil) Lubrication Speed:6100 r/min; Grease lub.:4000; Weight:0.062 Kg; Housing(min.):74.010; Housing(max.):74.029; Shaft(min.):67.987; Cu:13.2; |
| PC30-1 Excavator Slewing Bearing | Bore Diameter (mm):120; B:40 mm; r max:2 mm; F:137 mm; d:120 mm; E:198 mm; D:215 mm; Outer Diameter (mm):198; C:40 mm; Brand:Timken; |
| 75 mm x 105 mm x 16 mm 02 0520 00 Slewing Ring Bearing | Bore Diameter (mm):170; (Grease) Lubrication Speed:1100 r/min; Calculation factor (e):0,29; Basic static load rating (C0):1550 kN; Basic dynamic load rating (C):916 kN; Bearing number:23134RH; C:88 mm; da min.:182 mm; Da max.:268 mm; Width (mm):88; Size (mm):75 mm x 105 mm x 16 mm ; |
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
HS6-29E1Z External Gear Slewing Ring Bearings (32.9*25*2.2inch) For Digger Derricks Video