| No. | Brand | b | B | e | f | m | s | Q | X |
| 2-19mm | - | - | - | - | - | - | - | - | - |
| 23pc | - | - | 128 mm | - | - | - | - | - | - |
| b92.03940 | Rexroth | - | - | - | - | - | - | - | - |
| 1991-1995 | koyo | - | - | - | - | - | - | - | - |
| 6308Z | NSK | - | 24,5 mm | - | - | - | - | - | - |
| 1X | - | - | 12,7 mm | - | - | - | - | - | - |
| 9mm/12mm/15mm/18mm | - | - | - | - | - | 7,2 kg / Weight | - | - | - |
| 06-13 | - | - | - | - | - | - | - | - | - |
| 5-87610018-0 | - | - | 36 mm | - | - | - | - | - | - |
| #6016ZZX | koyo | - | - | - | - | - | - | - | - |
| 3/4 | - | - | 5 mm | - | - | - | - | - | - |
| 227g | - | - | 18 mm | - | - | - | - | - | - |
| 12 | INA | - | 25.400 mm | - | - | - | - | - | - |
| 55 | Nachi | - | - | - | - | - | - | - | - |
| 46% | - | - | - | - | - | - | - | - | - |
| UK311 | NSK | - | - | - | - | - | - | - | - |
| 3 | - | - | - | - | - | - | - | - | - |
| N224 | NSK | - | - | - | - | - | - | - | - |
| 10-50pcs | - | - | 31 mm | - | - | - | - | - | - |
| (2 | Bower | - | 24,074 mm | - | - | - | - | - | - |
| 99.5% | - | - | - | - | - | - | - | - | - |
| 4 | - | - | 18 mm | - | - | - | - | - | - |
| 608 | - | - | - | - | - | - | - | - | - |
| 6310VVC3 | NSK | - | 10 mm | - | - | - | - | - | - |
| NU213 | NSK | - | - | - | - | - | - | - | - |
| 150XRN23 Precision Cross Taper Roller Bearing | Bearing number:51113; Outer Diameter (mm):90; Width (mm):18; D:90 mm; H:18 mm; Basic static load rating (C0):106 kN; Basic dynamic load rating (C):37 kN; D1:67 mm; Brand:ISB; Size (mm):65x90x18; |
| Super Precision XA 301600N Slewing Bearing 1470*1803.5*92mm | Basic dynamic load rating - C:750 kN; B:67 mm; Basic static load rating - C0:1160 kN; Factor - k2:0.049; Outer Diameter (mm):170; r1,2 - min.:2.1 mm; Ca - min.:5.8 mm; Width (mm):67; Bore Diameter (mm):260; D1:237 mm; |
| R9-59E3 Outer Gear Cross Roller Slewing Bearings(66.3*53.78*3.15inch) For Lift Truck Rotators | C:64 mm; Bearing number:NJG 2318 VH; Brand:SIGMA; Bore Diameter (mm):90; B:64 mm; D:190 mm; d:90 mm; Outer Diameter (mm):190; Width (mm):64; Size (mm):90x190x64; |
| XSI140844-N Cross Roller Slewing Ring Bearing For Handling Systems | Outside Diameter:0.63 Inch | 16 Milli; Relubricatable:No; Separable:No; C0r:6.08; Other Features:2 Rib Outer Ring | D; rs(min):0.4; (Refer.)Mass(kg):0.006; Basic static load rating (C0):6.08 kN; Oil lub.:28000; Category:Needle Non Thrust Ro; |
| 06 0475 22 Slewing Ring Bearing | Weight:1,17 Kg; Bearing number:KBL40154-PP; Bore Diameter (mm):40; L:154 mm; Brand:NBS; D1:59 mm; d:40 mm; D:62 mm; Outer Diameter (mm):62; L1:121,2 mm; |
| 10-250655/0-04030 Four-point Contact Ball Slewing Bearing 555mmx755mmx63mm | Brand:Timken; C:29 mm; Width (mm):49,21; O:82,87 mm; Bore Diameter (mm):49,2125; B:49,21 mm; B1:5,36 mm; L:4,8 mm; d:49,2125 mm; S:24,6 mm; |
| VLI201094 Bearing | B:65 mm; d:110 mm; Bearing number:NP422; Brand:ISO; D:280 mm; Bore Diameter (mm):110; Size (mm):110x280x65; C:65 mm; Width (mm):65; Outer Diameter (mm):280; |
| S20-125E1 Single Row Vertical Thrust Slewing Bearings(134.057*117.88*5.44inch) For Stationary And Mobile Cranes | da max.:15 mm; Basic dynamic load rating C:5.4 kN; Snap Ring:No; r2 min.:14 mm; Basic static load rating C0:2.36 kN; Basic static load rating (C0):2,36 kN; d1:– mm; Calculation factor kr:0.025; Category:Single Row Ball Bear; r1,2 min.:0.3 mm; |
| 133.45.2500 Slewing Bearing 2279x2721x231mm | m:89,3 kg / Weight; Brand:INA; Bore Diameter (mm):200; d:200 mm; Cr:2340000 N / Dynamic; Bearing number:LSL192340-TB; D:420 mm; d1:265,7 mm; Width (mm):138; s:7 mm / Axial displac; |
| CRBS1308 Crossed Roller Bearing | Thread Length (l1):0.750; Mis-alignment Angle (a deg.):10; Bore Diameter (mm):4,826; Weight (g):14.00; Dynamic Load Rating (Cr):809; Bearing Type - steel-on-steel:steelonsteel; Thread Size (G) - 10-32 UNF:1032 UNF; Width (B):0.3120; Bore Dia (d):0.1900; Rod Overall Length (l2):1.563; |
| NRXT30025DD Crossed Roller Bearing | Dimension G:7.375 in; C0 - Static Load:99000 lb; Dimension L:3.84 in; Oil Lubrication - T Seal:2200 rpm; Grease Lubrication - B/C/O Seal:950 rpm; Weight:32 lb; Grease Lubrication - M/N Seal:1300 rpm; Y1 - Geometry Factor:2.88; Dimension F:10.25 in; Shaft Size Type:Imperial; |
| 16301001 Internal Gear Slewing Ring Bearings (102.5*85.36*7.44inch) For Utility Derricks | a:102,6 mm; db:403 mm; D:596,9 mm; da:428 mm; Brand:NSK; Basic dynamic load rating (C):1670 kN; d:368,3 mm; R:9,7 mm; C:60,325 mm; T:95,25 mm; |
| Slewing Bearing RKS.062.30.1904 With Internal Gear | L:180 mm; J:152 mm; A0:34 mm; H3:127 mm; d1:50 mm; A1:13 mm; Bore Diameter (mm):50; Brand:NACHI; A3:22 mm; Bearing number:UKFCX11+H2311; |
| RE14025UUC0 High Precision Cross Roller Ring Bearing | Bore Diameter (mm):30; T:17,25 mm; Basic dynamic load rating (C):43,2 kN; Weight:0,231 Kg; D:62 mm; (Grease) Lubrication Speed:6000 r/min; Outer Diameter (mm):62; Basic static load rating (C0):50,5 kN; d:30 mm; Brand:CYSD; |
| 16286001 No Gear Slewing Ring Bearings (131*114*8inch) For Large Cranes | Basic static load rating (C0):835 kN; (Grease) Lubrication Speed:2200 r/min; Bearing number:NP2228 E; Outer Diameter (mm):250; D:250 mm; Weight:16,1 Kg; d:140 mm; C:68 mm; B:68 mm; Size (mm):140x250x68; |
| 130.50.3150 Three Row Roller Slewing Ring Bearing | Bore Diameter (mm):492; Brand:KOYO; r1 min.:1,5 mm; Width (mm):480; d:492 mm; Weight:449 Kg; Calculation factor (e):0,33; r min.:5 mm; Basic static load rating (C0):21200 kN; Size (mm):492x655x480; |
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
RKS.413290203001 Crossed Roller Slewing Bearings(1495*1164*110mm) With Internal Gear Teeth For Industrial Robot Arm Video