| No. | Brand | b | B | e | f | m | s | Q | X |
| 40210AX000 | - | - | 750 mm | - | - | - | - | - | - |
| 1978-1993 | - | - | 29,007 mm | - | - | - | - | - | - |
| (5pcs) | - | - | 17,3 mm | - | - | - | - | - | - |
| 1] | - | - | - | - | - | - | - | - | - |
| NU409-M1-C3 | fag | - | 7,938 mm | - | - | - | - | - | - |
| GE70-DO | - | - | - | - | - | - | - | - | - |
| C3 | - | - | 18 mm | - | - | - | - | - | - |
| 1 | - | - | - | - | - | - | - | - | - |
| S140W-V | - | - | - | - | - | - | - | - | - |
| ATC200X | - | - | 80 mm | - | - | - | - | - | - |
| 6307ZZE | Nachi | - | - | - | - | - | - | - | - |
| Seven7 | - | - | - | - | - | - | - | - | - |
| 4.8mm | - | - | - | - | - | - | - | - | - |
| NUP310ECNP/C3 | SKF | - | - | - | - | - | - | - | - |
| 18mm | INA | - | 38,000 mm | - | - | - | - | - | - |
| 3mm | - | - | - | - | - | - | - | - | - |
| 71916CEGA/P4A | - | - | - | - | - | - | - | - | - |
| [Jz-T107] | - | - | - | - | - | 0,017 kg / Weight | - | - | - |
| 21 | INA | - | - | - | 0,85 mm | - | - | - | - |
| magsafe2 | - | - | - | - | - | - | - | - | - |
| (1220*2440) | - | - | 45 mm | - | - | - | - | - | - |
| 4898546 | - | - | - | - | - | - | - | - | - |
| 1209 | SKF | - | 15 mm | - | - | - | - | - | - |
| 2007-2007 | koyo | - | - | - | - | - | - | - | - |
| XU050077 Cross Roller Slewing Ring Bearing For Industrial Manipulator | Long Description:45MM Bore; 75MM Outs; Preload class A:38 N/micron; Bore Diameter (mm):75; Basic dynamic load rating - C:13 kN; Gref:3.4 cm3; r3,4 - min.:0.6 mm; D1:64.25 mm; Calculation factor - f2A:1; D:75 mm; Static axial stiffness, preload class B:59 N/µm; |
| 9O-1Z30-0980-0163 Crossed Roller Slewing Rings 870/1095/85mm | Size (mm):12x8x8; Brand:SKF; Weight / Kilogram:0.007; Fatigue load limit Pu:0.285 kN; Manufacturer Name:SKF; r min.:0.4 mm; Fw:8 mm; Basic dynamic load rating - C:2.7 kN; Outer Diameter (mm):8; Bearing number:HK 0808; |
| VSA200744 Bearing 672*838.1*56mm | Bearing number:HK3024; D:37 mm; Bore Diameter (mm):30; Outer Diameter (mm):37; Width (mm):24; Brand:ISO; C:24 mm; Size (mm):30x37x24; Fw:30 mm; |
| 1797/3760G Slewing Bearing 3760x4220x240mm | Outer Diameter (mm):190; Cr:39000 N / Dynamic lo; Brand:FAG; d:140 mm; Bore Diameter (mm):140; Width (mm):24; a:50 mm; da:155 mm / Tolerance:; ra max:0,6 mm; Bearing number:HSS71928-E-T-P4S; |
| I.505.20.00.C Internal Gear Flange Slewing Bearing(518*326.5*56mm) For Public Works Machinery | d:85 mm; (Grease) Lubrication Speed:2700 r/min; Brand:CX; Bearing number:NA5917; Width (mm):46; Basic static load rating (C0):290 kN; Outer Diameter (mm):120; B:46 mm; Bore Diameter (mm):85; Size (mm):85x120x46; |
| MTE-590T External Gear Slewing Ring Bearings (33.534*23.125*2.875inch) For Truck-mounted Cranes | Bearing number:K25x32x15; Basic static load rating (C0):18,4 kN; Outer Diameter (mm):32; Fw:25 mm; (Grease) Lubrication Speed:18000 r/min; Weight:0,021 Kg; B:15 mm; Width (mm):15; Ew:32 mm; Basic dynamic load rating (C):11,3 kN; |
| 07 0946 05 Internal Gear Slewing Bearing(1066*785*85mm)for Lifting Machinery | Brand:ISO; Width (mm):20; Ew:23 mm; Bore Diameter (mm):18; Bearing number:K18x23x20; Outer Diameter (mm):23; Size (mm):18x23x20; B:20 mm; Fw:18 mm; |
| RE16025UUC0 High Precision Cross Roller Ring Bearing | Static load, C0:355 kN; Axial rigidity:279 N/µm; Angle (α):15 °; Characteristic rolling element frequency, BSF:7.53 Hz; Max operating temperature, Tmax:120 °C; Mass:12.15 kg; Characteristic cage frequency, FTF:0.44 Hz; Size (mm):200x310x51; Preload level:7; Fatigue limit load, Cu:11.8 kN; |
| CRBF5515AT Bearing | R:3,5 mm; Outer Diameter (mm):82,931; Brand:Timken; Bearing number:25580/25523; C:22,225 mm; T:26,988 mm; Bore Diameter (mm):44,45; Size (mm):44.45x82.931x26.988; Width (mm):26,988; d:44,45 mm; |
| 2910DBD101t Four-point Contact Ball Slewing Bearing With Innter Gear | SI:0; SLR:35.5; r:1; C0:197; Bearing number:RNA6912; Fw:68 mm; Size (mm):68x85x45; Width (mm):45; hidYobi:RNA6912; (Grease) Lubrication Speed:3800 r/min; |
| 02 0720 02 Internal Gear Slewing Bearing(835*578*82mm)for Lifting Machinery | da min.:64 mm; Outside Diameter:3.937 Inch | 100 Mil; Snap Ring:No; Rolling Element:Ball Bearing; Limiting Speed - Grease:5,300 rpm; Category:Angular Contact Ball; Enclosure:Open; Weight / Kilogram:0.636; Da max.:91 mm; |
| 16305001 External Gear Slewing Ring Bearings (9.5*4.813*1.344inch) For Log Loaders And Feller Bunchers | Weight:47,9 Kg; Outer Diameter (mm):380; r1 min.:4 mm; Size (mm):180x380x75; r4 min.:4 mm; r2 min.:4 mm; d1:250,5 mm; D:380 mm; D1:319,4 mm; S:6,1 mm; |
| 02 2618 00 Slewing Ring Bearing | Lubrication Type:Non-Relubricatable; Dynamic Load Rating:8740 lbf; Seal Type:Molded Shroud; Angle between Set Screws:90 º; Material:Bearing Steel; Sub Series:RAE..RR; Series:Standard; Set Screw Size:M10x1.5; Shaft Size d:1.969 in; Outside Ring Width C:22.000 mm; |
| 07 1075 01 Slewing Ring Bearing | r0 max.:0,6 mm; Characteristic cage frequency, FTF:0.41 Hz; outer ring width:23 mm; rn:0,5 mm; D1:115,21 mm; maximum rpm (oil):6500 rpm; static load capacity:40000 N; Characteristic outer ring frequency, BPF0:4.1 Hz; dynamic load capacity:57500 N; Noun:Bearing; |
| Slewing Bearing XSI 140544 N 444*614*56mm | Weight:74,6 Kg; d:220 mm; r min.:5 mm; Outer Diameter (mm):460; D:460 mm; Basic static load rating (C0):1570 kN; Bearing number:NU 344; B:88 mm; Brand:NSK; Fw:284 mm; |
| XR882055 Crossed Roller Bearing | Basic static load rating (C0):300000 kN; Width (mm):50.800; Outer Diameter (mm):127.000; (Oil) Lubrication Speed:4300 r/min; C:41.275 mm; Calculation factor (e):0.30; Basic dynamic load rating (C):241000 kN; Weight:3,31 Kg; Calculation factor (Y0):1.1; r2 min.:3.3 mm; |
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
RKS.160.14.1094 Crossed Roller Slewing Bearings(1164*1024*56mm) Without Gear For Industrial Manipulator Video