No. | Brand | b | B | e | f | m | s | Q | X |
440X320mm | - | - | 19,000 mm | - | - | - | - | - | - |
33274499 | INA | - | 272 mm | - | - | - | - | - | - |
3097664 | - | - | 15,000 mm | - | - | - | - | - | - |
2pc | - | - | 52 mm | - | - | - | - | - | - |
1X-3X | - | - | - | - | - | - | - | - | - |
Qj222 | - | - | - | - | - | - | - | - | - |
87-90-1 | - | - | - | - | - | - | - | - | - |
220g | INA | - | 19,05 mm | - | - | - | - | - | - |
100% | - | - | 28 mm | - | - | - | - | - | - |
125 | fag | - | 23 mm | - | - | - | - | - | - |
1.0TONS | - | - | - | - | - | - | - | - | - |
1070076877 | Rexroth | - | 65 mm | - | - | - | - | - | - |
4WE10D31/CW110N9Z55 | Rexroth | - | - | - | - | - | 17 mm | - | - |
SL185030-A-C3 | INA | - | - | - | - | - | - | - | - |
PC200-7 | - | - | - | - | - | - | - | - | - |
4 | Thomson | - | - | - | - | - | - | - | - |
PSVD-27E-4 | - | - | - | - | - | - | - | - | - |
pc100-5 | - | - | 70 mm | - | - | - | - | - | - |
9118K, | FAFNIR | - | - | - | - | - | - | - | - |
Cw-08 | - | - | - | - | - | - | - | - | - |
16 | - | - | - | - | - | - | - | - | - |
1200X1200mm | - | - | 44,45 mm | - | - | - | - | - | - |
12L | - | - | - | - | - | - | - | - | - |
MMXC1980 Crossed Roller Bearing | Dimension H:7.1 in; Shaft Size:10 in; Series Type:Heavy Series; Dimension N:27.252 in; Bearing - Housing - Seal:HSE1000BXHRSS; Dimension P:1.9 in; Bolt Size:4 x M24; Seal Type:Viton Single Lip; Bearing Type:Split Cylindrical Ex; Maximum Speed:700 rpm; |
RKS.313500404001 Crossed Roller Slewing Bearings(1365*1038*102mm) With Internal Gear Teeth For Industrial Robot Arm | Cone Part Number:81600; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:40800 lbf; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:157000 lbf; C0 - Static Radial Rating:134000 lbf; Design Units:Imperial; db - Cone Backface Backing Diameter:6.73 in; G2 - Heat Generation Factor (Rib-Roller End):98.4; Series:81000; d:6.0000 in; |
RKS.161.14.0414 Crossed Roller Slewing Bearings(503.3*344*56mm) With External Gear For Industrial Automation | Designation SKF:VKBA 1480; Designation FAG:713678050; Compatibility:FORD / COUGAR / eng; Bearing number:CX057; Designation SNR:R152.42; Brand:CX; Designation Ruville:5242; |
06-0823-18 External Gear Slewing Ring Bearing(979*717*100mm)for Construction Machinery | e - ISO Factor3:0.32; Design Units:Imperial; Series:6300; Da - Cup Frontface Backing Diameter:5.00 in; D:5.3447 in; Y - ISO Factor4:1.85; Cg - Geometry Factor5:0.0827; r - Cup Backface To Clear Radius1:0.130 in; K - Factor2:1.8; Cup Part Number:6320-B; |
124.40.2800 Slewing Bearing 2625x2978x112mm | Dimension H:1.3 in; Cr - Dynamic Load Rating:23155 lbf; Note:This product line wa; Dimension B:5.0 in; Maximum Speed:3940 rpm; Dimension Y:0.6 in; Support Type:Take-Up; Bearing - Housing - Seal UPC:013992103574; Dimension D:8.0 in; Dimension S:1.5 in; |
VU200405 Slewing Ring Bearing(474*336*46mm)for Packing Machine | Width (mm):280; Bearing number:23288 KCW33; Brand:CX; Bore Diameter (mm):440; (Grease) Lubrication Speed:320 r/min; Size (mm):440x790x280; B:280 mm; C:280 mm; Weight:604 Kg; Outer Diameter (mm):790; |
A16-53E1A External Gear Slewing Rings(61.3*47.12*5.88inch) For Tunnel Boring Machines | Brand:FAG; Db min:96 mm; Bore Diameter (mm):60; Bearing number:33112; B:30 mm; nG:6900 1/min / Limitin; Da max:93 mm; rb max:1,5 mm; C0r:171000 N / Static lo; db min:67 mm; |
260DBS205y Four-point Contact Ball Slewing Bearing With External Gear | Shaft Diameter db:100 mm; J1:58 mm; UPC Code:999999999; N:18 mm; End Cover1:EC218; A2:158 mm; Locating Rings (width x OD):SR160X6.25; J:280.00 mm; Bearing:23218; A1:100 mm; |
RKS.061.25.1424 Four Point Contact Slewing Bearings(1558*1339*68mm) With External Gear Teeth For Steel Plant | D:460 mm; Bearing number:24156W33; Size (mm):280x460x180; C:180 mm; Brand:ISO; Bore Diameter (mm):280; Width (mm):180; d:280 mm; Outer Diameter (mm):460; B:180 mm; |
1797/2500G2 Slewing Bearing 2500x3250x210mm | Weight:1,6 Kg; D:160 mm; Size (mm):105x160x26; Basic dynamic load rating (C):74,6 kN; Bore Diameter (mm):105; d:105 mm; Bearing number:6021-ZZ; Basic static load rating (C0):64,2 kN; C:26 mm; Brand:ISB; |
RKS.160.20.1904 Crossed Roller Slewing Bearings(2012*1796*68mm) Without Gear For Industrial Manipulator | SLR:35.6; DA_:13.299; ALP23:0; T:46,038 mm; D_:136.525; C_:36.512; Brand:NSK; d:71,438 mm; C:36,512 mm; Y1:1.3; |
VLU200844 Slewing Bearing | Size (mm):35x45x15; Bore Diameter (mm):35; Weight:0,047 Kg; C:15 mm; Fw:35 mm; D:45 mm; Width (mm):15; Basic static load rating (C0):26,6 kN; Brand:KOYO; Outer Diameter (mm):45; |
08 0675 00 Slewing Ring Bearing | Brand:ISB; Basic dynamic load rating (C):413 kN; C:105 mm; Width (mm):105; Bore Diameter (mm):120; Outer Diameter (mm):180; B:105 mm; d:120 mm; Size (mm):120x180x105; Bearing number:FC 2436105; |
200DBS202y Slewing Bearing | dk:35.5 mm; r2 min.:0.6 mm; da max.:29.3 mm; Bore Diameter (mm):42; Material constant KM:330; da - max.:29.3 mm; rb max.:0.6 mm; Constant - KM:330; da min.:28.2 mm; |
12785001 No Gear Slewing Ring Bearings (41.85*28.75*3.25inch) For Aerial Lifts | r min.:0,08 mm; Bore Diameter (mm):2,38; Bearing number:R133ZZA; Da max.:4 mm; D:4,762 mm; ra max.:0,08 mm; da min.:2,9 mm; C:2,38 mm; da max:3,1 mm; B:2,38 mm; |
Cheaper Price XI 302980N Cross Roller Bearing 2796*3100*109mm | Bore Diameter (mm):50; D:110 mm; Width (mm):54; d:50 mm; Size (mm):50x110x54; B1:54 mm; Bearing number:7310 CDB; Outer Diameter (mm):110; a:49 mm; Angle (α):15 °; |
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
RKS.162.16.1314 Crossed Roller Slewing Bearings(1399*1182*68mm) With Internal Gear For Industrial Robot Video