| No. | Brand | b | B | e | f | m | s | Q | X |
| P75 | - | - | - | - | - | - | - | - | - |
| Yx76-305-915 | - | - | - | - | - | - | - | - | - |
| 6005 | NSK | - | 24 mm | - | - | - | - | - | - |
| A2FM23 | - | - | - | - | - | - | - | - | - |
| 30cbm | - | - | - | - | - | - | - | - | - |
| Hed40A15b/50z14L110s | - | - | - | - | - | - | - | - | - |
| 17mm | - | - | - | - | - | - | - | - | - |
| 1050 | - | - | - | - | - | - | - | - | - |
| 684 | - | - | 20 mm | - | - | - | - | - | - |
| 300SFF | - | - | - | - | - | - | - | - | - |
| 10 | - | - | - | - | - | - | - | - | - |
| KH06-PP | INA | - | - | - | - | - | - | - | - |
| 10 | - | - | 85 mm | - | - | - | - | - | - |
| 98% | - | - | - | - | - | - | - | - | - |
| 30-9-9 | - | - | 38 mm | 0,43 | - | - | - | - | - |
| HM218248 | NTN | - | - | - | - | - | - | - | - |
| Dw5-2-10 | - | - | 56,363 mm | 0.3 | - | - | - | - | - |
| r412007700 | Rexroth | - | 56.642 mm | - | - | - | - | - | - |
| K5V200 | - | - | - | - | - | - | - | - | - |
| 3000 | - | - | - | - | - | - | - | - | - |
| 1983-2006 | Timken | - | 60 mm | - | - | - | - | - | - |
| 12mm | - | - | 24 mm | - | - | - | - | - | - |
| 2-19mm | - | - | - | - | - | - | - | - | - |
| 0 Inch | 0 Millimeter x 4.331 Inch | 110.007 Millimeter x 0.741 Inch | 18.821 Millimeter XU160405 Cross Roller Slewing Ring Bearing For Industrial Positioner | Y - ISO Factor4:1.62; Cup Part Number:86100-B; G2 - Heat Generation Factor (Rib-Roller End):427; C - Cup Width:1.3125 in; G1 - Heat Generation Factor (Roller-Raceway)5:3800; r - Cup Backface To Clear Radius1:0.130 in; D1 - Flange Outer Diameter:10.3750 in; D:10.0000 in; Design Units:Imperial; Series:86000; Size (mm):0 Inch | 0 Millimeter x 4.331 Inch | 110.007 Millimeter x 0.741 Inch | 18.821 Millimeter ; |
| 01-1180-00 External Gear Slewing Ring Bearing(1358*1045*98mm)for Construction Machinery | Compatibility:MITSUBISHI / EXPO /; Bearing number:CX379; Designation SKF:VKBA 3327; Brand:CX; Designation FAG:713619420; Designation Ruville:7318; |
| High Quality XSI 201355N Cross Roller Bearing 1210*1455*80mm | Outer Diameter (mm):85; db - min.:91 mm; C1:11.1 mm; Calculation factor - fHC:1; da min.:91 mm; Da max.:124 mm; d:85 mm; D:130 mm; r3,4 min.:0.6 mm; |
| 130.25.700 Slewing Bearing 576x844x148mm | D1:27 mm; T2:34 mm; ra1 max:0,3 mm; Width (mm):34; D:52 mm; d:20 mm; Cua:2450 N / Fatigue li; A:0,019 / Factor min.; da max:25 mm; nG:6000 1/min / Limitin; |
| R8-39N3 Outer Gear Cross Roller Slewing Ring Bearings(42.6*33.133*2.874inch) For Radar Antennas | Outer Diameter (mm):26; Bore Diameter (mm):22; Fatigue load limit (Pu):1,56; Ew:26 mm; Reference speed:18000 r/min; U:10 mm; Basic static load rating (C0):13,7 kN; Weight:0,0075 Kg; Basic dynamic load rating (C):8,8 kN; Fw:22 mm; |
| High Quality XI 503720N Cross Roller Bearing 3420*3910*138mm | Outer Diameter (mm):62; d:35 mm; Bore Diameter (mm):35; Weight:0,14 Kg; Angle (α):25 °; Brand:NTN; B:14 mm; Bearing number:5S-7007ADLLBG/GNP42; Size (mm):35x62x14; Width (mm):14; |
| HT10-54P1Z No Gear Slewing Ring Bearings (60*48*3.5inch) For Lift Truck Rotators | r3,4 min.:2 mm; Manufacturer Item Number:NJ 2310 ECP; Da - max.:99.6 mm; Bearing number:NJ 2310 ECP; Inch - Metric:Metric; Basic static load rating - C0:186 kN; bore type:Straight; Rolling Element:Cylindrical Roller B; db - min.:73 mm; d1:71.2 mm; |
| 3R16-265E1 External Gear Heavy Duty Slewing Ring Bearing(281.386*254.72*10.55inch) For Heavy Duty Cranes | Bearing number:NU 417 M; Angle ring:HJ 417; r1,2 min.:4 mm; Size (mm):210x85x52; ra max.:3 mm; Limiting speed:4300 r/min; Axial load factor Y:0.6; D1 ≈:164.5 mm; da - max.:109 mm; Calculation factor kr:0.15; |
| VU250433 Bearing 344*522*55mm | Bearing number:6202-2RSR; Size (mm):15x35x11; d1:21,1 mm; C0r:3750 N / Static load; Cr:8200 N / Dynamic loa; D2:30,9 mm; d:15 mm; B:11 mm; D:35 mm; da min:19,2 mm; |
| 9E-1B14-0188-1029 Slewing Bearing With External Gear Teeth 135x259.36x35mm | d3:98 mm; r1 min.:1 mm; Basic dynamic load rating (C):650 kN; d:50 mm; C:32 mm; Size (mm):50x130x42.5; A:10 mm; S:30 mm; d2:122,5 mm; Outer Diameter (mm):130; |
| XR882055 Bearing | Shaft Size Type:Imperial; Dimension B:8.38 in; Eng Internal Radial Clearance - Max:0.0031; Full Timken Part Number:QAMH15A211SB; Pre Install Clearance Min:0.0020 in; Dimension F:2.00 in; Y1 - Geometry Factor:3.14; Dimension SA:3.62 in; Shaft Size :2-11/16 in; Dimension D:6.380 in; |
| 615894A Crossed Roller Bearing | H2:132 mm; Basic dynamic load rating (C):48,9 kN; Bearing number:UCP309; Basic static load rating (C0):29,5 kN; H:67 mm; L1:75 mm; J:190 mm; N:20 mm; Bore Diameter (mm):45; B:57 mm; |
| 1797/2600G2K Slewing Bearing 2600x3232.8x200mm | Ca1 –0.2:49 mm; Width (mm):60; r3 min.:0,6 mm; r min.:1,5 mm; Size (mm):85x130x60; C1+0.2:54,2 mm; ra max.:1 mm; d:85 mm; r4 min.:0,6 mm; Brand:SKF; |
| RU66 Crossed Roller Bearing 35x95x15mm | Dimension T:0.890 in; Weight:3.351 lb; Seal Type:Narrow Shroud; Inside Ring Outside Diameter:1.854 in; Dynamic Load Rating:6400 lbf; Total Height H2:92.1 mm; Dimension D1:1.843 in; Total Width A:1.780 in; Center of Bearing from End S:10.7 mm; Bolt Hole Length N1:24.6 mm; |
| 2.25 Inch | 57.15 Millimeter x 0 Inch | 0 Millimeter x 1.219 Inch | 30.963 Millimeter PC200-2 Excavator KOMATSU Double Row Slewing Bearing 1209*916*95mm | GRS rpm:4800; Width (mm):24; DI_:99.919; r:1.5; SRE:7.8; ALPHA_:0; Bearing number:6018N; DE_:130.081; B_:24; ra:1.5; Size (mm):2.25 Inch | 57.15 Millimeter x 0 Inch | 0 Millimeter x 1.219 Inch | 30.963 Millimeter ; |
| Large Stocks XIU25/560 Cross Roller Bearing 425*662*75mm | rb max.:3,3 mm; Weight:0,77 Kg; B:25,4 mm; Cb min.:5,5 mm; Outer Diameter (mm):100; Bearing number:K28985-28921; Db min.:96 mm; Da min:89 mm; Fatigue load limit (Pu):16,7; Basic dynamic load rating (C):91 kN; |
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
RKS.062.25.1754 Four Point Contact Slewing Bearings(1862*1605*68mm) With Internal Gear For Construction And Industry Machines Video